November 2012 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Interesting problem
by Bryan D. Boyle 24 Nov '12

24 Nov '12

On 11/24/2012 11:54 AM, Jeff Carrier wrote: > is this Xipar? If so you might have the "test tone" turned on. Don't ask > me how I know...Doh Not that I can tell. Radio-tune-menu says the test tone is off on all nodes. Hmmm....

2 4

Re: [App_rpt-users] ID Interval on Asterisk
by Ramesh Dhami, VA3UV/M 24 Nov '12

24 Nov '12

Correct - there's one more that I couldn't / can't think of off the top of my head. I'll get to it over the weekend. I also want Keith to force ulaw as the priority codec. That's what we try to use up here and it sounds excellent (BBC quality as I used to say!). R. ------Original Message------ From: Tim Sawyer To: ramesh(a)va3uv.com Cc: Keith Goobie Cc: app_rpt-users Subject: Re: [App_rpt-users] ID Interval on Asterisk Sent: Nov 23, 2012 10:17 PM Also set linktolink=yes. Eventually you want to remove the DSP-404 and let allstar run the show. I did and never looked back. -- Tim :wq On Nov 23, 2012, at 7:08 PM, "Ramesh Dhami, VA3UV/M" <ramesh(a)va3uv.com> wrote: > In the rpt.conf file set duplex=0 Sent on the TELUS Mobility network with BlackBerry

2 1

ACID Install - "Asterisk died with Code 1"
by Randy Neals 24 Nov '12

24 Nov '12

Hi all, -Fresh ACID install on a PC (Intel Core 2 - 2.2GHz / 4GB / 60GB SSD) -Config prepared on portal and system configured via set up script. -3 URIx on system System came up, and started spitting out "mpg123: no process killed" "Asterisk died with code 1" "Automatically restarting Asterisk" I searched the list, saw what other people have tried and worked through that. -Checked the config files with the ACID Systems Admin guide as reference. -Re-made Askterisk -Re-made Zaptel Worked on it for a couple of hours tried rebooting several times. Finally, as I was writing this e-mail, the allstar PC had been running for 5-10 minutes and has decided to start working. Error messages have stopped scrolling and the green LED on the URIs is now pulsing on all 3 URIs. Is this normal operation? Is there something else I can do to resolve this? Thanks, Randy W3RWN / VE3RWN

2 2

Re: [App_rpt-users] Receive Adjustment Failed
by Jim W7RY 24 Nov '12

24 Nov '12

Well it looks like the modified USB fob was defective or not quite compatible. ***Anyone want to buy some 100 watt 440 to 470 MHz Tait Repeaters? I can program the frequencies and PL codes. w7ry at arrl.net directly. Documentation is downloadable from the internet. 73 Jim W7RY From: Eric Guth Sent: Monday, November 19, 2012 9:40 AM To: Jim W7RY Subject: RE: [App_rpt-users] Receive Adjustment Failed By the way, this chip is common on most brands of this vintage radio. On my Allstar node I connected pin 9 through a 10 uf cap in the radio to the input of my URI. Folks tell me my audio is excellent. I use the signal processing of the app_rpt for squelch and CTCSS. From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: Monday, November 19, 2012 5:53 PM To: Eric Guth Subject: Re: [App_rpt-users] Receive Adjustment Failed T855 UHF receiver and T857EX UHF Transmitter. These are T800 II series. Program with a PC. I tried several points. None seem to work correctly. Thanks and 73! Jim W7RY From: Eric Guth Sent: Sunday, November 18, 2012 1:15 AM To: Jim W7RY Subject: RE: [App_rpt-users] Receive Adjustment Failed Jim - which Tate equipment are you using and where did you pick off the discriminator audio? 73, Eric 4Z5UG / WA6IGR Allstar Node: 28422 4Z5UG(a)guth.us Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim W7RY Sent: Saturday, November 17, 2012 7:48 AM To: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Receive Adjustment Failed Well I made some progress.... Found a different place to pick off discriminator audio. I’m using Tate equipment and this is my first time working with it. The info that I have is lacking. Guess I need to get in touch with some of me mates down-under to set me straight! Anyway, I think it got it where I need if for now. Thanks 73 Jim W7RY From: Jim W7RY Sent: Friday, November 16, 2012 8:29 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Receive Adjustment Failed Any idea guys? I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. This is a modified CM108 USB fob. Thanks for all the great help! 73 Jim W7RY Please enter your selection now: 2 tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=32767 tries=1, setting=2, meas=32767 tries=2, setting=2, meas=32767 tries=3, setting=2, meas=32767 tries=4, setting=1, meas=32767 tries=5, setting=1, meas=32767 tries=6, setting=1, meas=32767 tries=7, setting=1, meas=32767 tries=8, setting=1, meas=32767 tries=9, setting=1, meas=32767 tries=10, setting=1, meas=32767 tries=11, setting=1, meas=32767 DONE tries=12, setting=63, meas=32767, sqnoise=13206 ERROR: RX INPUT ADJUST FAILED. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

ID Interval on Asterisk
by Keith Goobie 24 Nov '12

24 Nov '12

Good day all. I have my asterisk configuration connected to a RLC-DSP404 controller. The controller does a fine job of iding in cw. I would like to disable it in the asterisk rpt.conf file. No need for two iders. Is it as simple as commenting out the idrecording line. Or I could set the idtime to a very long time and have it very seldom id. Comments or suggestions welcome. Keith -- keith(a)goobie.org Keith Goobie Richmond Hill, ON, CANADA

2 2

Re: [App_rpt-users] login error
by barbagris 23 Nov '12

23 Nov '12

Hello. It seems I was right, and I can log on centos. We walk slowly hi hi. Thank you all. Best wishes John EA2BKH On Nov 22, 2012, at 7:10 AM, barbagris <ea2bkh(a)ea2bkh.com> wrote: Hello, good morning. I have the following problem: I installed the Centos acid, and at the end when you put Zaragoza login, I have set the node number and password, and still leave me login error. I've triedvarious ways and no way to enter correctly. No you do have if I can help it. Thank you very much, and sorry for the inconvenience. John ea2bkh 73, s _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Problem with a Two Node Configuration.
by Keith Goobie 23 Nov '12

23 Nov '12

Hi All A colleague VA3SD built a standalone node on an Acid based platform, the node he was assigned is 27211. The associated callsign is VE3UOR. WE needed to add a second node, so I subscribed and was given node number 29133. The repeater callsign is VE3LSR and my profile is established as VA3YC. I followed the guidance from the internet regarding the creation of two nodes on the same ACID platform. The resulting configuration more or less works. Here are the issues I am seeing: > > 1. Both nodes show up on the nodelist page. You can do a successful drill > down on detail for the VE3LSR/29133 node, but it is not possible on the > VE3UOR/27211 node. > 2. You can successfully connect from the VE3UOR node to the VE3LSR node but > not vice versa. Thoughts or guidance will be much appreciated. Keith -- keith(a)goobie.org Keith Goobie Richmond Hill, ON, CANADA

4 5

login error
by barbagris 22 Nov '12

22 Nov '12

Hello, good morning. I have the following problem: I installed the Centos acid, and at the end when you put Zaragoza login, I have set the node number and password, and still leave me login error. I've tried various ways and no way to enter correctly. No you do have if I can help it. Thank you very much, and sorry for the inconvenience. John ea2bkh 73, s

1 0

Re: [App_rpt-users] Node Freezing
by Matthew Pitts 22 Nov '12

22 Nov '12

Is that "Fouled Up Beyond All Repair"? Matthew Pitts N8OHU Sent from my Verizon Wireless 4G LTE smartphone

2 1

Echoink and what sound like extreme packet
by K & R Yoksh 20 Nov '12

20 Nov '12

Hi Buddy, Our VOIP group is dealing with some of the same issues all of the sudden. One thing we've noticed is quite a few DTMF false decodes. As you know, app_rpt mutes the DTMF tones from going out over the VOIP side, so DTMF falsing can sound like packet loss to remote stations. I suggest watching the CLI during your transmissions, and keep an eye out for falsing.. This may not be the entire problem, but perhaps a part of it. I followed the directions from an earlier post (Jan 2012), with good results. No more false decodes AFAIK: http://ohnosec.org/pipermail/app_rpt-users/2012-January/003909.html 73 Kyle K0KN Olathe, KS --- Original Message --- Howdy, Just wondering if anyone else is seeing the following. Sounds like a bandwidth issue, but I really don't believe it is, if for no other reason than nothing else seems affected, including a VOIP phone (believe me, I'd hear about it if the VOIP phone was doing this). Besides, I should have up to 5MBPS upload speed, which in real terms is likely less, but not so much less as to explain this. If I'm connected to more than two Echolink stations, my outbound audio, though not inbound audio, loses lots of data. Dropped syllables, unintelligible audio (because of many many dropped syllables), words run together, in other words, typical extreme packet loss. Not just a degradation of audio quality. I don't know if the same occurs if I'm connected to several Allstar nodes, although I'm game to test that if anyone feels like it. I'm certainly not opposed to the idea that it's a bandwidth problem, but I'd find this hard to believe, simply because there's no problem with the VOIP phone. That isn't running throughout the Asterisk box, BTW, completely separate. Definitely a puzzler though. -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or 888-75-BUDDY

1 0