November 2012 - App_rpt-users - lists.keekles.org

ALLMON help….
by Bradley Haney 14 Nov '12

14 Nov '12

Hello all.. getting ALLMON working i think but should i get this over and over on my box == Manager 'admin' logged off from 207.179.213.22 == Manager 'admin' logged on from 207.179.213.22 == Manager 'admin' logged off from 207.179.213.22 == Manager 'admin' logged on from 207.179.213.22 == Manager 'admin' logged off from 207.179.213.22 == Manager 'admin' logged on from 207.179.213.22 == Manager 'admin' logged off from 207.179.213.22 == Manager 'admin' logged on from 207.179.213.22 == Manager 'admin' logged off from 207.179.213.22 == Manager 'admin' logged on from 207.179.213.22 == Manager 'admin' logged off from 207.179.213.22 == Manag It appears to log on and the log right off log on and then off. Am I missing a step? Bradley

3 2

Allmon Node Information
by Tim Sawyer 13 Nov '12

13 Nov '12

I'm sure Allmon users will be happy to know that the Node Information column now shows the frequency, callsign and location. Thanks goes to the Duuude for maling this data available to us. >From the readme: Allstar Database - If you don't have the Allstar "database" (really just a text file) the Node Information column will only show the IP address of the remote nodes. - The included database (astdb.txt) is likely old by the time you install. It should be periodically updated with the astdb.php script. Please set your cron job to a reasonable time, like once a day and manually run when you need the occasional adhoc update. - Mark astdb.php executable and add to cron. Run just once a day please. ie 01 03 * * * cd /var/www/html/allmon; ./astdb.php -- Tim :wq

3 2

Adjusting Audio Levels
by Sal P. De Franco 13 Nov '12

13 Nov '12

Hello, How do you adjust the audio levels on the node only. In the irlp world I use "Aumix". What do I use in the App_rpt world. Repeater using 2 gm300 and DMK Urix. Sal N6SPD Node 28365

8 10

Node cannot connect
by FERNANDO VILLARROEL 13 Nov '12

13 Nov '12

Dear. I have a ACID succesfully installed with URI connected to Motorola GM300 I cannot connect my local node (1999) to my ACID server. If i run: test*CLI> radio tune rxnoise tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=7336 tries=1, setting=7, meas=17695 tries=2, setting=11, meas=26213 tries=3, setting=11, meas=25994 tries=4, setting=11, meas=26186 tries=5, setting=11, meas=26213 tries=6, setting=11, meas=26186 DONE tries=6, setting=688, meas=26186, sqnoise=0 INFO: RX INPUT ADJUST SUCCESS. test*CLI> radio tune rxvoice INFO: RX VOICE ADJUST START. target=7200 tolerance=360 tries=0, setting=1.000000, meas=27537 tries=1, setting=0.261466, meas=7468 tries=2, setting=0.252083, meas=7586 tries=3, setting=0.239256, meas=7164 tries=4, setting=0.239256, meas=6969 tries=5, setting=0.239256, meas=6558 tries=6, setting=0.262679, meas=6628 tries=7, setting=0.285348, meas=8243 tries=8, setting=0.249242, meas=7582 tries=9, setting=0.236685, meas=6607 tries=10, setting=0.257928, meas=7100 DONE tries=10, setting=0.257928, meas=7100.000000 INFO: RX VOICE GAIN ADJUST SUCCESS. test*CLI> radio tune rxtone INFO: RX CTCSS ADJUST START. target=2400 tolerance=100 tries=0, setting=1.000000, meas=6244 tries=1, setting=0.384369, meas=2587 tries=2, setting=0.356585, meas=2628 tries=3, setting=0.325648, meas=1980 tries=4, setting=0.394725, meas=2555 tries=5, setting=0.370779, meas=2191 tries=6, setting=0.406148, meas=2456 DONE tries=6, setting=0.406148, meas=2456.00 INFO: RX CTCSS GAIN ADJUST SUCCESS. But when i run: test*CLI> rpt nodes 1999 test*CLI> ************************* CONNECTED NODES ************************* <NONE>LI> test*CLI> Any idea what i am doing wrong or how i can solve this issue? Regards

1 0

AUTOPATCH dialing TIME OUT..
by Bradley Haney 12 Nov '12

12 Nov '12

Hello everyone .. I have looked through the archives and didn't find anything on this, and if there was i missed it so here it goes. My allstarbox "times out" before i get done dialing a 10 digit number.. I can get about 5 in and that is about it.. I did extend the dialtimewait to 6000 but you have to be really really fast at pumping out the numbers to get it to go through.. I have even increased it to 10000 with out any luck. Is there a setting to set the "overall" autopatch time out not just the wait time between digits? Thanks for all the help.. Bradley 28079

1 0

Server Failover
by Jeff Carrier 11 Nov '12

11 Nov '12

Here's an interesting question. I had a server that I use as a HUB node on my local network fail (ups died). Is there a way to use the permanent connection or some other script to connect to one node and search/attempt a connection to another node on loss of that "primary" connection similar to what the RTCM does? Thanks de K0JSC

1 0

Way to detect activity?
by Alan Adamson 11 Nov '12

11 Nov '12

Is there a simple way for an external script to detect when a node is active or not? I'd like to create a script that plays back a message, but only when the node has been inactivate for some period of time and then occasionally once it is active. Similar to how WAN RS does theirs, but I'm pretty sure they use a cron job to do that. I'd like to just detect activity and so it based up on that. Thanks in advance, and any pointers appreciated. Alan

2 1

Connecting While not Registered
by Jim W7RY 11 Nov '12

11 Nov '12

Question... So is this the only line of code that I need to connect to a node if my node is not registered? Under the [nodes] stanza in rpt.conf 2560 = radio@208.70.77.197:4569/2560,NONE Do I need to add anything else anywhere? I want to connect to 2560 as soon as the node reboots. thanks 73 Jim W7RY

2 1

Location of Helper Scripts
by Ian Venable 11 Nov '12

11 Nov '12

Need some help. For some reason I can not locate the Helper Scripts. I downloaded the .iso from http://stats.allstarlink.org/dl/installcd/acid_centos.iso. According to the ACID System Administrator's Guide they should be in /root/acid. But when I go to /root they are not there. I am looking to run the astupd.sh script to fetch, compile and install the latest version of Asterisk . Any help would be appreciated. Ian Venable Ki6ies

2 1

Re: [App_rpt-users] Will allmon work with xipar
by Tim Sawyer 11 Nov '12

11 Nov '12

There is a special hack Jim added to the Asterisk Manager for Allmon called SawStat. It might not be in Xipar, I don't know. But update your sources anyway and see if that helps. -- Tim :wq On Nov 10, 2012, at 3:10 PM, Wally Carriero <n2lyj(a)yahoo.com> wrote: > I was able to get everything set up how ever it's not show connections. Any ideas. Thanks for all you do! Wally Carriero n2lyj > > Www.n2lyj.net > > > Sent from my iPad

2 1