February 2012 - App_rpt-users - lists.keekles.org

USB Stick
by Larry 10 Feb '12

10 Feb '12

Hello Larry here, will allstar work on a usb stick. Larry n3vsi

1 0

IPAD and JAVA
by Fran 09 Feb '12

09 Feb '12

I have an IPad and would like to run the Allstar Portal software however the Ipad does NOT support JAVA at this time, is there any app that might help. Frank

3 2

Documentation Typo?
by Jim Kehler 09 Feb '12

09 Feb '12

I visited this page when I was adding another URI today: http://ohnosec.org/drupal/node/49 I think I found a typo, but I don't know who edits that web site so maybe someone can pass it along. It says: /17. Add the 5678 extension in the radio-secure context to call the rpt application using the new node number: [radio-secure] exten => 1234,1,rpt,1234 exten => 5678,1,rpt.5678/ I think the last line should say "rpt,5678" instead of "rpt.5678". At least I had a lot less errors on the console screen after I changed it to a comma :-) 73, Jim KH2D

2 1

app_rpt-users site down?
by K&R Yoksh 07 Feb '12

07 Feb '12

Is it just me, or is the app_rpt-users site down? http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 73. Kyle K0KN

3 2

Setting up my Beagle Board LOX
by Michael Kaufman 06 Feb '12

06 Feb '12

I am working on setting up a beagle board LOX node that will be on a UHF repeater. I currently have a VHF simplex node running on an acid install that has been on the air for over a year. When I built my first node I found excellent documentation on the website for setting up the acid install but have been unable to find any setup documentation for the beagle board or any info on the mailing list. I have downloaded pickel-current.tar from the website, and will be writing to the micros sd card on a macbook pro (using an external card reader as it is an older computer). I will also need to request an additional node number from the allstar web-site. These are the items I need the most help with being not totally familiar with writing a dd image to the micro sd card as well as requesting and set up of an additional node with out screwing up the existing one. Thanks Mike WB9SLI Node 27558

2 1

Source but not for Acid or Limey
by Jim Kutsch 04 Feb '12

04 Feb '12

The first line in README in trunk states: This is the Asterisk source package for ACID and LIMEY LINUX Is Asterisk AllStar source that hasn't been modified for Acid or Limey available anywhere in the SVN? I want to build AllStar for Fedora16. Most of what is in trunk probably isn't distro-specific but the makefiles (at least) are. Alternatively, is there a list of what c files have been updated from "stock" Asterisk?? Thanks, Jim, KY2D

2 1

ACID Boot Error Help Request
by John (WB5NFC) 03 Feb '12

03 Feb '12

My trusty Acid server bit the dust last week. This is full-size Dell with plenty of horsepower and a quad radio interface, not my BeagleBoard. The computer goes through POST with no errors reported, then: grub loading stage 2 GNU grub V0.97 [Minimal BASH-like line editing supported. I think this happened after a brief power outage, but I'm not sure. Just just noticed the nodes were down and then found a computer that would not reboot. Suggestions for troubleshooting, please? John / WB5NFC

2 1

startup error
by Scott Weis 02 Feb '12

02 Feb '12

One of our systems here started having an error on its last restart. It can't load chan_usbradio with this error: chan_usbradio.c:5677 load_module: Unable to make hid list. Then asterisk exits after a lot of other errors. Any ideas?

2 2

Reverse autopatch
by Eric Harrison 02 Feb '12

02 Feb '12

Is any using this feature and does it work? How do you answer an imcomming call? Presently I'm using teliax as my istp and using a DID for inbound calls but I having problems making it work. Any ideas? Outbound calling works fine. Eric Sent from Yahoo! Mail on Android

2 1

just being sure
by Stephen Liggett 02 Feb '12

02 Feb '12

I am new to AllStar, and now finally have the box working and my node seems to be working. The next step is interfacing with the repeater. I would like to utilize the remote base inputs/outputs of my RC-1000 controller. For that controller COS in is active high, and the PTT out is active low. I have the URI interface. So, 5 questions: 1) When I go into my web based portal, I need to set the node configuration. Under Interface Configuration (advanced), there is the option "Carrier from". Should I make that "USB from the COR line on the USB FOB", or, "USB Invert...." . 2) same for the PTT setting "Invert PTT". The two options are ground to transmit, and, open to transmit. (I think I got this one). 3) Any additional components needed as far as COR and PTT? 4) I assume that the PTT from the URI goes to the COS of the controller, and the COS from the URI goes to the PTT of the controller. Right? (they could have been labelled in reverse for the convenience of the user, so just asking). 5) When the interface is configured on the web, I see that you hit the submit button. But is there an "upload" button somewhere for those settings to be sent out, like there is for the server settings? steve W3YT repeater

2 1