March 2012 - App_rpt-users - lists.keekles.org

Weather script.
by Brian Burton 28 Mar '12

28 Mar '12

If you check allstarnode.com there is a article about the weather script under the xipar section. It explains how to make the file play. Written so that you can copy and paste to your node and edit the node number. And playback for simplex or localplay if your duplex. On Mar 28, 2012 8:51 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Parallel Port manipulation when using Quad PCI Card > (Tim Sawyer) > 2. Re: Parallel Port manipulation when using Quad PCI Card > (Jim Duuuude) > 3. Weather Script (Jeffrey S. Carrier) > 4. DNS Name instead of IP (Jeffrey S. Carrier) > 5. Dtmf passthrough? (Anthony Percy) > 6. ECHOLINK CONNECT FAILURES (Bradley Haney) > 7. Log files (torben(a)klimt-online.com) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 27 Mar 2012 20:09:48 -0700 > From: Tim Sawyer <tim.sawyer(a)me.com> > To: app_rpt List <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Parallel Port manipulation when using > Quad PCI Card > Message-ID: <81A89637-93D5-4603-A776-C72E1CE4EB00(a)me.com> > Content-Type: text/plain; charset="us-ascii" > > Don't forget the Oh No Sec! site... > http://ohnosec.org/drupal/search/node/GPIO > > -- > Tim > :wq > > On Mar 27, 2012, at 4:22 PM, Ron Simpson wrote: > > > Hey Guys!, > > > > I am looking to use the Parallel Port to control some hardware funtions > on my node, I am using the Quad PCi card, I am looking for the command > string to do this. Has anyone done this with a Quad Card and maybe point me > in the right direction? > > > > Thanks!! > > > > Ron Simpson, > > N6GKJ Amateur Radio > > ................... > > > > Have you ever noticed that when you are looking for something, > > it is always found in the last place you look? > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

Log files
by torben＠klimt-online.com 28 Mar '12

28 Mar '12

hi all, where can i find the log files ? In the moment i have the problem - sometimes i get the error message after *3+allstarlinknodenr "connection failed" a connect from the telephoneportal or webtrx is ok tnx und 73 from germany tom dh6mbt Torben Klimt Hubmaierstrasse 38a 85051 Ingolstadt Telefon: 08450-928430 Mobil: 0151-178 74499 torben(a)klimt-online.com<mailto:torben@klimt-online.com>

2 1

ECHOLINK CONNECT FAILURES
by Bradley Haney 28 Mar '12

28 Mar '12

Good morning everyone. I would like to thank everyone for the help i have got from this email group.. all the reading i have done is going to turn our repeater into a power house. 1 request i have gotton from our group is that they would like to have a response back if the echolink node they tried to dial is not available or didn't go through like it does on a normal echolink box. So if John tries to call joe using the *33xxxxxxx and lets says joe is busy or the call doesn't go through he hits to many numbers etc.. he would get a response back on saying node not available or failed.. did i miss something in the set up? also for adding a SIP phone like my droid, instead of going through the sip.allstar way i would like to directly connect to my box. I have the SIP.conf set up and my phone registers but not sure what else to set up to be able to dial to my rptr node to be able to monitor the repeater and ... Thanks guys.. PS.. ALLSTAR BOX project box been running solid no crashes since the beginning 4 months ago.. Take that microsoft :)

1 0

Dtmf passthrough?
by Anthony Percy 28 Mar '12

28 Mar '12

Hi all, no one commented on my message so i have resent it below just in case it was missed.... Any comments anyone??? Regards Anthony, VK2ACP Hi all, I have setup voicemail on our Allstar repeater e.g i can call the voicemail by doing a *69999 with 9999 being the voicemail. I can hear the voicemail menu but none of my dtmf commands are accepted.. I thought that if i used the dtmf transmit comand it may work but it still does not work... Any ideas on how to pass dtmf to the voicemail? Regards Anthony, VK2ACP

1 0

DNS Name instead of IP
by Jeffrey S. Carrier 28 Mar '12

28 Mar '12

Is there a way to setup my node(s) to register a DNS name to the ASL server rather than an IP? I'm finding my ISP changes my IP radically (up to the 3rd octet) on almost a daily basis and it takes the ASL server a bit to catch up. Thanks and 73 de K0JSC Sorry for the back to back posts, I was sending from the wrong email address and either one actually made it to the list.

1 0

Weather Script
by Jeffrey S. Carrier 28 Mar '12

28 Mar '12

I have a Question for anyone who might be able to help. I'm not sure how many folks are using this. I've set up the weather alert script on two boxes and it seems to download the alerts just fine but when I run it from the cron job in webmin I see this error: getWxAlert: New Wx Alerts for COC043 getWxAlert: Get Wx Alert INFO for COC043: WARNING getWxAlert: Get Wx Alert INFO for COC043: ADVISORY getWxAlert: Launching playWxAlertBg... /var/lib/asterisk/Weather/getWxAlert: line 316: /playWxAlertBg: No such file or directory So it never really puts the alerts out over the air automatically. Can anyone point me in the right direction? Thank you, K0JSC Jeff

1 0

Parallel Port manipulation when using Quad PCI Card
by Ron Simpson 28 Mar '12

28 Mar '12

Hey Guys!, I am looking to use the Parallel Port to control some hardware funtions on my node, I am using the Quad PCi card, I am looking for the command string to do this. Has anyone done this with a Quad Card and maybe point me in the right direction? Thanks!! Ron Simpson, N6GKJ Amateur Radio ................... Have you ever noticed that when you are looking for something, it is always found in the last place you look?

4 3

proxy setup
by Neal Garbenis 28 Mar '12

28 Mar '12

I have a mobile node (internet from aircard) I am trying to get the proxy server and proxy client set up with no luck These are the files I added/changed can anyone tell me what I did wrong Client Node # 27785 /etc/asterisk/iax.conf [radio-proxy] type=user deny=0.0.0.0/0.0.0.0 permit=65.185.4.232/255.255.255.255 context=radio-secure-proxy disallow=all allow=g726aal2 transfer=no [radio-proxy-out] type=peer host=65.185.4.232 username=27785 secret=12341234 auth=md5 disallow=all allow=g726aal2 transfer=no /etc/asterisk/rpt.conf file: /[nodes] ; Note, if you are using automatic update for allstar link nodes, ; no allstar link nodes should be defined here. Only place a definition ; for your locak nodes, and private (off of allstar link) nodes here. 27785 = radio(a)127.0.0.1/27785,NONE 27786 = radio(a)127.0.0.1/27786,NONE _20XX = radio-proxy-out/0%s _21XX = radio-proxy-out/0%s _22XX = radio-proxy-out/0%s _23XX = radio-proxy-out/0%s _24XX = radio-proxy-out/0%s _25XX = radio-proxy-out/0%s _26XX = radio-proxy-out/0%s _27XXX = radio-proxy-out/0%s _28XXX = radio-proxy-out/0%s _29XXX = radio-proxy-out/0%s 27724 server proxy /etc/asterisk/iax.conf [27785] type=friend host=dynamic username=radio-proxy secret=12341234 auth=md5 context=radio-in disallow=all allow=g726aal2 transfer=no /etc/asterisk/extensions.conf [radio-secure] exten=_20XX,1,Rpt,${EXTEN} exten=_21XX,1,Rpt,${EXTEN} exten=_22XX,1,Rpt,${EXTEN} exten=_23XX,1,Rpt,${EXTEN} exten=_24XX,1,Rpt,${EXTEN} exten=_25XX,1,Rpt,${EXTEN} exten=_26XX,1,Rpt,${EXTEN} exten=_27XXX,1,Rpt,${EXTEN} exten=_28XXX,1,Rpt,${EXTEN} exten=_29XXX,1,Rpt,${EXTEN} [radio-in] exten => _0N.,1,Rpt(${EXTEN:1}|F) exten => _0N.,n,Hangup [allstar-sys] exten => _9.,1,Rpt(${EXTEN:2}|X|${EXTEN:1:1}) exten => _9.,n,Hangup /etc/asterisk/rpt.conf [proxy] ipaddr=65.185.4.232 Thanks NG8Y

1 0

Call a script from dtmf
by Stephen Liggett 28 Mar '12

28 Mar '12

I would like the DTMF sequence D336 (no *) to result in *53. Is there a way to do this? steve w3rx

2 1

Call a script from dtmf
by Neal Garbenis 27 Mar '12

27 Mar '12

I know I saw how to to this somewhere but I can't seem to find it now How do I call a bash script from a dtmf command For example let's say I want a 93 to call /sbin/reboot Thanks for the help Neal Garbenis Jr. NG8Y

2 1