May 2013 - App_rpt-users - lists.keekles.org

URI<>TKR-750 cable
by Jay Urish 06 Feb '15

06 Feb '15

Does anybody have notes on connecting tkr750 to a URI? TIA, W5GM

4 3

Registration issues
by Randy Ballard 07 Dec '13

07 Dec '13

My nodes 27365 and 27751 both on same server is showing on the status page but not showing in the rpt_extnodes on other nodes im using standard port 4569. we have been seeing this with several nodes in our group over past month or so of coarse if we define in the rpt file we can connect but would be nice if it was registering. sometimes it may show up in a few hours or a day generally a reboot and its gone again Thanks for any help in advance 73 Randy KB3HJC

5 9

Allmon on ACID
by Chris Andrist 01 Jun '13

01 Jun '13

I have been trying for a few days to get Allmon to work with my nodes. For some reason it will not login via the manager interface. Are there some detailed instructions to get it installed. I have read the README at https://github.com/tsawyer/allmon/blob/master/README several times and still not able to get it to connect. I have also edited manager.conf 8-10 times and still am unable to make it work. I am not new to Linux or Asterisk at all, but for some reason I can't get this to work. Regards, Chris Andrist, KC7WSU

2 2

allmon on xipar
by Branden Watson 31 May '13

31 May '13

has anyone gotten Allmon to work on Xipar? If so would you mind sharing some directions?

2 1

Anyone Use A Mac Mini For AllStar?
by Chris K7AZ 29 May '13

29 May '13

Greetings Group: Just wondering if anyone has used a Mac Mini for an AllStar Node? Thank you, Chris K7AZ Node 29275

3 2

How to connect five nodes on different mountains connected via WLan (HamNet?
by Thomas Delmonego 29 May '13

29 May '13

Hi to all! I try to connect five repeaters (nodes) on different mountains and provided with AllStarLink on Acid OS. All mountains are connected with HamNet, an Amateur wireless lan operating in 2,4 GHz and 5,8 GHz Amateur Band and with no connection to Internet. How can I configure AllStarLink files to create a permanent connection? Can anyone help me with instructions for a beginner? Many thanks to all group! 73! Thomas, IW3AMQ

4 7

Re : Re: URI audio issue
by pete M 27 May '13

27 May '13

He is using the output of his repeater controler. --- Message initial --- De : "Ken" <ke2n(a)cs.com> Envoyé : 26 mai 2013 14:48 A : area51now(a)aol.com, app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] URI audio issue The mic input (pin 9) goes direct to the chip with no attenuation or filtering. If you put too much audio there, you can burn out the input of the chip. It's pin 21 you want, as others have noted. The input calibration routine will tell you if it is working ("radio tune rxnoise" for starters) 73 Ken From: area51now(a)aol.com [mailto:area51now@aol.com] Sent: Saturday, May 25, 2013 3:16 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] URI audio issue Hello I am new allstar and am working on converting my current echo link to the allstar. I have it all hooked up to the repeater and i am not getting any audio coming back over the internet I have the repeater receive audio hooked to the mic input of the URI (it tried both inputs) and i have verified there is audio present on that input. I have tried it in VOX, and have inverted the cos signal but no audio. I welcome any input on this issue. Thanks Bob _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Flag when local Cor is active
by Wally Carriero 27 May '13

27 May '13

I would like know how to get a flag when the node is receiving a local transmission. I can set the flag for the transmitter active but prefer to do some idle messages after x minutes of inactivity. I have both xipar and allstar boxes. Sent from my iPad

1 0

URI audio issue
by area51now＠aol.com 26 May '13

26 May '13

Hello I am new allstar and am working on converting my current echo link to the allstar. I have it all hooked up to the repeater and i am not getting any audio coming back over the internet I have the repeater receive audio hooked to the mic input of the URI (it tried both inputs) and i have verified there is audio present on that input. I have tried it in VOX, and have inverted the cos signal but no audio. I welcome any input on this issue. Thanks Bob

4 3

CentOS-6 based ACID ?
by KB0KZR 24 May '13

24 May '13

Any progress on CentOS-6? If not, I'll try my hand at it... -Matt-

3 3