August 2013 - App_rpt-users - lists.keekles.org

Re : Re : Re: Re : Re: Asterisk ended with exit status 1
by pete M 26 Aug '13

26 Aug '13

Damn cellular keyboard. Large finger small key.. --- Message initial --- De : "pete M" <petem001(a)hotmail.com> Envoyé : 26 août 2013 17:05 A : "C B" <harvard5362(a)yahoo.com>, "David Osborn" <david.osborn(a)manx.net>, app_rpt-users(a)ohnosec.org Objet : [App_rpt-users] Re : Re: Re : Re: Asterisk ended with exit status 1 On some bios you csn shut acpi. Jusr check in the power settings. --- Message initial --- De : "C B" <harvard5362(a)yahoo.com> Envoyé : 26 août 2013 17:01 A : "pete M" <petem001(a)hotmail.com>, "David Osborn" <david.osborn(a)manx.net>, app_rpt-users(a)ohnosec.org Objet : Re: Re : Re: [App_rpt-users] Asterisk ended with exit status 1 Thank you Sounds like I should be ok running that way as I do not think I need any power control. Could a BIOS setting in power management somehow conflict with ACPI, perhaps a dumb question however I thought I would ask it. Chris ________________________________ From: pete M <petem001(a)hotmail.com> To: C B <harvard5362(a)yahoo.com>; David Osborn <david.osborn(a)manx.net>; app_rpt-users(a)ohnosec.org Sent: Monday, August 26, 2013 1:48 PM Subject: Re : Re: [App_rpt-users] Asterisk ended with exit status 1 acpi is power management... Without acpi you have full power all the time. No powee saving stuff. I think it is used to monitor fan speed bur not sure. --- Message initial --- De : "C B" <harvard5362(a)yahoo.com> Envoyé : 26 août 2013 15:04 A : "David Osborn" <david.osborn(a)manx.net>, app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] Asterisk ended with exit status 1 Hi I tried the following and it did stop the error massages. - Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows: kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off However I am not sure what ACPI does for the allstar link. will this have any negative impacts? or does this tell anyone what the problem may be? Chris ________________________________ From: David Osborn <david.osborn(a)manx.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, August 26, 2013 10:10 AM Subject: [App_rpt-users] Asterisk ended with exit status 1 I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1 Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied! Anyway I don’t know if this will help, but it might be worth a go. David Osborn GD4HOZ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re : Re: Re : Re: Asterisk ended with exit status 1
by pete M 26 Aug '13

26 Aug '13

On some bios you csn shut acpi. Jusr check in the power settings. --- Message initial --- De : "C B" <harvard5362(a)yahoo.com> Envoyé : 26 août 2013 17:01 A : "pete M" <petem001(a)hotmail.com>, "David Osborn" <david.osborn(a)manx.net>, app_rpt-users(a)ohnosec.org Objet : Re: Re : Re: [App_rpt-users] Asterisk ended with exit status 1 Thank you Sounds like I should be ok running that way as I do not think I need any power control. Could a BIOS setting in power management somehow conflict with ACPI, perhaps a dumb question however I thought I would ask it. Chris ________________________________ From: pete M <petem001(a)hotmail.com> To: C B <harvard5362(a)yahoo.com>; David Osborn <david.osborn(a)manx.net>; app_rpt-users(a)ohnosec.org Sent: Monday, August 26, 2013 1:48 PM Subject: Re : Re: [App_rpt-users] Asterisk ended with exit status 1 acpi is power management... Without acpi you have full power all the time. No powee saving stuff. I think it is used to monitor fan speed bur not sure. --- Message initial --- De : "C B" <harvard5362(a)yahoo.com> Envoyé : 26 août 2013 15:04 A : "David Osborn" <david.osborn(a)manx.net>, app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] Asterisk ended with exit status 1 Hi I tried the following and it did stop the error massages. - Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows: kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off However I am not sure what ACPI does for the allstar link. will this have any negative impacts? or does this tell anyone what the problem may be? Chris ________________________________ From: David Osborn <david.osborn(a)manx.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, August 26, 2013 10:10 AM Subject: [App_rpt-users] Asterisk ended with exit status 1 I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1 Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied! Anyway I don’t know if this will help, but it might be worth a go. David Osborn GD4HOZ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0

Re: [App_rpt-users] Asterisk ended with exit status 1
by David Osborn 26 Aug '13

26 Aug '13

Best thing is to try it :-) As I understand it, ACPI looks after power management. You may be able to run without it. I'm glad it had an effect as it helps to localise the problem. Does your LAN adapter come up? If so you could be well on the way. David -----Original Message----- From: C B Sent: 26/08/2013 19:54 To: David Osborn; app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Hi I tried the following and it did stop the error massages. - Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows: kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off However I am not sure what ACPI does for the allstar link. will this have any negative impacts? or does this tell anyone what the problem may be? Chris From: David Osborn <david.osborn(a)manx.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, August 26, 2013 10:10 AM Subject: [App_rpt-users] Asterisk ended with exit status 1  I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1 Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied! Anyway I don’t know if this will help, but it might be worth a go. David Osborn GD4HOZ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Re : Re: Asterisk ended with exit status 1
by pete M 26 Aug '13

26 Aug '13

acpi is power management... Without acpi you have full power all the time. No powee saving stuff. I think it is used to monitor fan speed bur not sure. --- Message initial --- De : "C B" <harvard5362(a)yahoo.com> Envoyé : 26 août 2013 15:04 A : "David Osborn" <david.osborn(a)manx.net>, app_rpt-users(a)ohnosec.org Objet : Re: [App_rpt-users] Asterisk ended with exit status 1 Hi I tried the following and it did stop the error massages. - Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows: kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off However I am not sure what ACPI does for the allstar link. will this have any negative impacts? or does this tell anyone what the problem may be? Chris ________________________________ From: David Osborn <david.osborn(a)manx.net> To: app_rpt-users(a)ohnosec.org Sent: Monday, August 26, 2013 10:10 AM Subject: [App_rpt-users] Asterisk ended with exit status 1 I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1 Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied! Anyway I don’t know if this will help, but it might be worth a go. David Osborn GD4HOZ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

2 1

Asterisk ended with exit status 1
by David Osborn 26 Aug '13

26 Aug '13

I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client - just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here: http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1 Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn't come up L so I was still stymied! Anyway I don't know if this will help, but it might be worth a go. David Osborn GD4HOZ

2 1

Re: [App_rpt-users] Manual Configurations
by Tim Sawyer 26 Aug '13

26 Aug '13

I'm pretty sure that's not the case. I think you have to invoke the download from the Web site or your server. -- Tim :wq On Aug 26, 2013, at 9:28 AM, Angelo Glorioso <n5uxt(a)hotmail.com> wrote: > Tim, > > I think once you use the on line configuration,the node/nodes updates everyday from the server. I am trying to stop this. > > > ----- Original Message ----- > From: Tim Sawyer > To: Angelo Glorioso > Cc: app_rpt-users(a)ohnosec.org > Sent: Monday, August 26, 2013 11:21 AM > Subject: Re: [App_rpt-users] Manual Configurations > > I don't use the online configuration, but don't you have to click a download button or something to get it to update. I mean, it's not automatic, is it? > -- > Tim > :wq > > On Aug 26, 2013, at 7:01 AM, Angelo Glorioso <n5uxt(a)hotmail.com> wrote: > >> >> Can someone tell me the command to prevent the system from updating the config files from online??? >> >> >> Thanks, >> Angelo >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

3 2

Beagleboard LOX audio levels
by C B 26 Aug '13

26 Aug '13

Hi Is there anyway to change the levels that the beagleboard / LOX put out and take in? Is there a conf file that can be edited? Chris

4 4

Re: [App_rpt-users] Asterisk ended with exit status 1
by C B 26 Aug '13

26 Aug '13

Hi I did what you suggested and it seems to complete without error. However it did not resolve the problem. I ran the same commands for Asterisk, still the same issue. Reran the Zaptel compile / install again and still no luck. I re-downloaded for the allstarlink.org the ISO for ACID in case what I downloaded originally was corrupt. after reinstalling I looked at the /root/acidinstall.log and I did not see anything that looked like an error. Am I forgetting something or could my hardware not be combatable? As part of this project I did install this successfully on a different computer. Any help greatly appreciated. Chris ________________________________ From: Paul J. Agamata <Sysman(a)Xceptions.COM> To: C B <harvard5362(a)yahoo.com> Sent: Saturday, August 24, 2013 4:57 PM Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Log into your 'root' account and navigate to the 'zaptel' directory. When your in there type the following: ./configure <enter> make <enter> make install <enter> Then reboot your computer and everything should be fine. _______________________________ Paul J. Agamata WH6FM Sysman(a)Xceptions.COM Hilo, Hawaii From: C B <harvard5362(a)yahoo.com> Reply-To: C B <harvard5362(a)yahoo.com> Date: Saturday, August 24, 2013 1:54 PM To: Paul Agamata <Sysman(a)Xceptions.COM> Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Paul Please excuse my lack knowledge here, I am very unsure of the compile / install procedure you are speaking of. is there anything you can refer me to that will contain instructions on how to do this? Is it something I did wrong? Sorry for not having a lot of experience. And thank you for your help. Chris ________________________________ From: Paul J. Agamata <Sysman(a)Xceptions.COM> To: C B <harvard5362(a)yahoo.com>; "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Saturday, August 24, 2013 4:46 PM Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 This is indicative of the zaptel drivers not in your kernel. Compile/Install then reboot and all should be well. The 'zaptel' directory is in the 'asterisk' source directory. Be aware that if you update your kernel you will need to re-install the zaptel modules. Regards, Paul _______________________________ Paul J. Agamata WH6FM Sysman(a)Xceptions.COM Hilo, Hawaii From: C B <harvard5362(a)yahoo.com> Date: Saturday, August 24, 2013 1:23 PM To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Asterisk ended with exit status 1 Hi I am attempting to build a ACID node. After several attempts of reinstalling the ACID with the same results I am asking for some help. All seems to complete normally, I download the configuration, reboot and the following error message keeps repeating. mpg123: no process killed Asterisk ended with exit status 1 Asterisk died with code 1 Automatically restarting Asterisk Computer is a HPdc5700 small form factor 1 GIG memory 500 GB SATA HDD than you in advance for any help Chris

3 5

PC Engines Alix 3d3
by Ramesh Dhami (VA3UV) 26 Aug '13

26 Aug '13

Hi All; Wonder if anyone has some long-term success (~ 1 year +) using the PC Engines Alix 3d3 board with app_rpt? Interested in knowing whether you are using it in a full duplex application (chan_usbradio) with DSP, etc., or in a half-duplex / simplex application (chan_simpleusb)? Centos (ACID), Limey or other? Cheers! Ramesh.

2 1

Re: [App_rpt-users] Asterisk ended with exit status 1
by C B 25 Aug '13

25 Aug '13

Hi I tried it with the settings to be a hub and it still does it. I also tried a HP DC 5800 with he same results. Last week when I built my HUB I had a HP XW8200 and it worked fine. Chris ________________________________ From: Pierre Martel <petem001(a)hotmail.com> To: C B <harvard5362(a)yahoo.com> Sent: Sunday, August 25, 2013 3:30 PM Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 try using input only no dsp and restart asterisk From: C B Sent: Sunday, August 25, 2013 5:40 PM To: Pierre Martel ; app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Hi I believe I only enabled the COR. it would seem that I should find a older computer perhaps. Chris ________________________________ From: Pierre Martel <petem001(a)hotmail.com> To: C B <harvard5362(a)yahoo.com> Sent: Sunday, August 25, 2013 1:37 PM Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 I had the same problem and was suspecting dsp. I did un update to latest svn. and was stillg etting same thing. Are you using any dsp on your node? ctcss decoding, cor, ect? From: C B Sent: Sunday, August 25, 2013 2:10 PM To: Paul J. Agamata ; app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Hi I did what you suggested and it seems to complete without error. However it did not resolve the problem. I ran the same commands for Asterisk, still the same issue. Reran the Zaptel compile / install again and still no luck. I re-downloaded for the allstarlink.org the ISO for ACID in case what I downloaded originally was corrupt. after reinstalling I looked at the /root/acidinstall.log and I did not see anything that looked like an error. Am I forgetting something or could my hardware not be combatable? As part of this project I did install this successfully on a different computer. Any help greatly appreciated. Chris ________________________________ From: Paul J. Agamata <Sysman(a)Xceptions.COM> To: C B <harvard5362(a)yahoo.com> Sent: Saturday, August 24, 2013 4:57 PM Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Log into your 'root' account and navigate to the 'zaptel' directory. When your in there type the following: ./configure <enter> make <enter> make install <enter> Then reboot your computer and everything should be fine. _______________________________ Paul J. Agamata WH6FM Sysman(a)Xceptions.COM Hilo, Hawaii From: C B <harvard5362(a)yahoo.com> Reply-To: C B <harvard5362(a)yahoo.com> Date: Saturday, August 24, 2013 1:54 PM To: Paul Agamata <Sysman(a)Xceptions.COM> Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 Paul Please excuse my lack knowledge here, I am very unsure of the compile / install procedure you are speaking of. is there anything you can refer me to that will contain instructions on how to do this? Is it something I did wrong? Sorry for not having a lot of experience. And thank you for your help. Chris ________________________________ From: Paul J. Agamata <Sysman(a)Xceptions.COM> To: C B <harvard5362(a)yahoo.com>; "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Sent: Saturday, August 24, 2013 4:46 PM Subject: Re: [App_rpt-users] Asterisk ended with exit status 1 This is indicative of the zaptel drivers not in your kernel. Compile/Install then reboot and all should be well. The 'zaptel' directory is in the 'asterisk' source directory. Be aware that if you update your kernel you will need to re-install the zaptel modules. Regards, Paul _______________________________ Paul J. Agamata WH6FM Sysman(a)Xceptions.COM Hilo, Hawaii From: C B <harvard5362(a)yahoo.com> Date: Saturday, August 24, 2013 1:23 PM To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] Asterisk ended with exit status 1 Hi I am attempting to build a ACID node. After several attempts of reinstalling the ACID with the same results I am asking for some help. All seems to complete normally, I download the configuration, reboot and the following error message keeps repeating. mpg123: no process killed Asterisk ended with exit status 1 Asterisk died with code 1 Automatically restarting Asterisk Computer is a HPdc5700 small form factor 1 GIG memory 500 GB SATA HDD than you in advance for any help Chris ________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

1 0