October 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] HID Died
by Steve Zingman 02 Oct '14

02 Oct '14

Doug, I'm glad to hear you will be submitting the patches to Jim for inclusion in the overall SVN. I'm interested in seeing the changes. I don't run Acid or the BBB image for that matter. I run checked out source from the SVN on Debian Wheezy. I'm looking forward to seeing the work that was done. I'll have to look at the simpleUSB and see the fix you submitted. 73, Steve N4IRS Steve, > I believe the (one line) simpleusb fix is already in the Acid svn. > The other (timing) issues are much more complex and effect a wide > range of modules. They have just been discovered so whether they will > be fixed in the Acid release remains to be seen. That is up to Jim. > One key test for the USB as I pointed out is to pull the USB cable on > a working system and see if it recovers when put back in without any > resetting. > 73 Doug > WA3DSP > http://www.crompton.com/hamradio -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] HID Died
by Steve Zingman 02 Oct '14

02 Oct '14

Doug, Can I assume you will be submitting those patches back to Jim for inclusion in the SVN? 73, Steve N4IRS > Message: 2 > Date: Thu, 2 Oct 2014 11:22:14 -0400 > From: Doug Crompton <doug(a)crompton.com> > To: Steve Denbow <kd8biw(a)gmail.com> > Cc: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] HID Died > Message-ID: <BLU172-W49038BF8E551183BD54258BAB90(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > Steve, > I believe we have eliminated most if not all of the problems that would cause the USB to not reset in the upcoming 1.2 BBB release. > 73 Doug > WA3DSP > http://www.crompton.com/hamradio -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

2 1

HID Died
by Steve Denbow 02 Oct '14

02 Oct '14

Good morning! My node uses a DMK URI and occasionally the green LED stops flashing and turns on steady. This is the error I get from the CLI. If I restart Asterisk, it seems OK for awhile again until the same thing happens. Rebooting the box makes no difference, still does it from time to time. It has been happening more frequently as of late (almost daily now). Any ideas or fixes? Thanks! [Oct 2 01:05:18] ERROR[3118]: chan_usbradio.c:2627 usbradio_read: HID process has died or something!! -- Hungup 'Zap/pseudo-41043279' -- Hungup 'Zap/pseudo-374722952' -- Hungup 'Zap/pseudo-2080343069' -- Hungup 'Zap/pseudo-1121828992' -- Hungup 'Zap/pseudo-926314953' -- Hungup 'Zap/pseudo-678940705' [Oct 2 01:05:19] WARNING[3108]: app_rpt.c:21882 rpt_master: rpt_thread restarted on node 29912 -- Re-Loading config for repeater 29912 -- rpt (Rx) initiating call to Radio/usb29912 on Radio/usb29912 == Set device 4-1 to usb29912 [Oct 2 01:05:19] WARNING[7607]: chan_usbradio.c:1728 hidthread: Loaded parameters from usbradio_tune_usb29912.conf for device usb29912 . [Oct 2 01:05:19] WARNING[7607]: chan_usbradio.c:2276 setformat: Unable to re-open DSP device 1 (usb29912): Device or resource busy == Set device 4-1 to usb29912 -- Steve Denbow | KD8BIW Ohio 220 Group (419)606-5774 Mobile kd8biw(a)gmail.com www.kd8biw.com

4 3

PATCH - Asterisk crashes when MDC 1200 is decoded (only if two nodes are linked)
by Ismael Isuani 01 Oct '14

01 Oct '14

Hi I attached the patch file. Regards.

3 2