October 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Nodes not showing at all. they are missing
by Steve Zingman 08 Oct '14

08 Oct '14

Bet it's those IRLP or EchoLink guys. ;) Just kidding. > Message: 1 > Date: Wed, 08 Oct 2014 08:11:50 -0700 > From: Tim Sawyer <tim.sawyer(a)mac.com> > To: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Nodes not showing at all. they are > missing > Message-ID: <42D0EDD3-1F4C-4567-8B04-78DE1B66F40C(a)mac.com> > Content-Type: text/plain; charset="windows-1252" > > The system hosting stats.allstarlink.org <http://stats.allstarlink.org/> is being ?pummeled". Steps are being taken to correct the problem. Thank you for your patients while this gets sorted out. > -- > Tim WD6AWP > >> On Oct 7, 2014, at 2:12 PM, Tim Sawyer <tim.sawyer(a)mac.com> wrote: >> >> I?ve notified the authorities. >> -- >> Tim >> :wq >>

1 0

rpt_extnodes quits
by Johnny Keeker 07 Oct '14

07 Oct '14

One of my nodes is having an issue. The rpt_extnodes list stops updates. I have taken these steps to correct the problem killall rc.updatenodelist killall rc.updatenodelist ; a second time to be sure it kills all /etc/rc.d/rc.updatenodelist & ; the list updates, and continues doing so for a few hours then falls upon the same problem. Anyone experiencing this?

1 0

Two nodes, One URI
by Sam Skolfield 06 Oct '14

06 Oct '14

Hello all, I want to set up an app_rpt server with two independently functioning simpleusb nodes: Node 1. Full duplex repeater Node 2. Aux transmitter The second node is nothing more than a transmitter (TX audio, PTT) so couldn't I simply configure the second node's simpleusb.conf file with "gpio4 = ptt" , "txmixa=no", and "txmixb=voice" ? Thanks and 73 -- KJ6QFS Sam Skolfield

4 3

Re: [App_rpt-users] All my nodes 40660/41182/41178 are no longer in the data base
by Jim 06 Oct '14

06 Oct '14

Alberto, I had the same problem with my nodes after I switched to satellite internet. I tracked the problem to being that the IP is using a web accelerator which I had to turn off. My nodes stay registered as long as the web accelerator is turned off. Hope this might help you with the problem. Jim Price N7YUR

1 0

All my nodes 40660/41182/41178 are no longer in the database
by alberto e. puig 06 Oct '14

06 Oct '14

Have tried everything I can think of,unsuccessfully... Re-submitting my servers and nodes info. The statpost lines for my nodes are not commented - semicolon before them, nothing has worked. Any ideas? The hardest way, should I try running CentOS acid again on my computers-servers? Is there is a easier way on doing this? Can some one administering the main servers help? All suggestions welcome. Thanks, > From: app_rpt-users-request(a)ohnosec.org > Subject: App_rpt-users Digest, Vol 68, Issue 6 > To: app_rpt-users(a)ohnosec.org > Date: Sun, 5 Oct 2014 12:00:02 -0400 > > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Node 40660 is no longer in the database ... (Doug Crompton) > 2. SIMPLE USB and regular usb.conf (Bradley Haney) > 3. Re: SIMPLE USB and regular usb.conf (Doug Crompton) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 4 Oct 2014 15:25:15 -0400 > From: Doug Crompton <doug(a)crompton.com> > To: "alberto e. puig" <alberto_e_puig(a)hotmail.com>, > "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Node 40660 is no longer in the database > ... > Message-ID: <BLU172-W52395B9EBCCE786D7B8BACBAA70(a)phx.gbl> > Content-Type: text/plain; charset="iso-8859-1" > > Alberto, > > I don't see you listed here either. You are registered however - > > 40660=radio@190.166.134.128:4569/40660,190.166.134.128 > > Look at /etc/asterisk/rpt.conf with your editor and make sure the statpost lines for your node are not commented - semicolon before them. If so remove the semicolons and reboot. > > ; *** Status Reporting *** > ; > ; Uncomment the following two statpost lines to report the status of your node to stats.allstarlink.org > ;statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null > ;statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates > > Remove semicolons on these two above statpost lines > > Also note that this is a per node setting so if you have other nodes configured in rpt.conf you would need to uncomment them also if you wanted them listed. > > This is what sends your status information to the server. It is not necessary for the system to operate but without it you will not appear on the list and other Allstar users will not know you are there. Sometimes this may be what you want! > 73 Doug > WA3DSP > http://www.crompton.com/hamradio > > > From: alberto_e_puig(a)hotmail.com > To: app_rpt-users(a)ohnosec.org > Date: Sat, 4 Oct 2014 06:43:20 -0400 > Subject: [App_rpt-users] Node 40660 is no longer in the database ... > > > > > Hi everyone, > > New to Allstar Link System. Everything is working just fine. I can still be able to use my node but in the last 2 days I cannot find my node info; on the Active Node List (Node 40660 is no longer in the database). The info. is being listed on the Allstar Link -- Node List as registered. > > KP4AP > > > 40660 > > 446.450 mHz > 100.0 > Sto Domingo,DN Dom.Rep. > > Dominican Republic > QTH > www.kp4ip.com > > Any help or suggestions will be appreciated. > > Regards and 73s, > > KP4AP > > Alberto > > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >

2 1

SIMPLE USB and regular usb.conf
by Bradley Haney 05 Oct '14

05 Oct '14

I have a 2 node system but i want 1 of the nodes to use simple usb and 1 to use the other method.. is that possible to have both on the same server at the same time running. WE currently use a vxr7000 repeater and to get good discrim audio we would hav eto do a mod on the repeater and we don't wan to do that so wanted to do simple usb on that machine and use DSP on our 5000 machine.. Any Thoughts? Thanks.. Bradley

2 1

Node 40660 is no longer in the database ...
by alberto e. puig 04 Oct '14

04 Oct '14

Hi everyone, New to Allstar Link System. Everything is working just fine. I can still be able to use my node but in the last 2 days I cannot find my node info; on the Active Node List (Node 40660 is no longer in the database). The info. is being listed on the Allstar Link -- Node List as registered. KP4AP 40660 446.450 mHz 100.0 Sto Domingo,DN Dom.Rep. Dominican Republic QTH www.kp4ip.com Any help or suggestions will be appreciated. Regards and 73s, KP4AP Alberto

2 1

Re: [App_rpt-users] HID Die
by Steve Denbow 04 Oct '14

04 Oct '14

Had some time this morning to do some trouble shooting based on some feedback, here are the results to your questions and suggestions (which I thank you for by the way!) *"What is the vintage of the computer, and how long has it been in operation? Is this a new "feature" that has appeared after years of use, or is this a new build exhibiting this from the get go?"* Computer is an IBM Lenovo ThinkCentre with a P4 processor, about 5 years old. Has been running as a linux box for over a year. This problem started about 6 months ago, so it was not always an issue. *"I wonder if the computer is logically moving the USB device. When this occurs, what are the results of executing lsusb at the Linux command line after exiting the CLI> prompt? Does it find the URI, and at the address shown in the error (4-1)? (lsusb will have two leading zeros... e.g 004-001)"* [root@QTH_Server ~]# lsusb Bus 004 Device 003: ID 0d8c:013a C-Media Electronics, Inc. Bus 004 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 So it appears that the box is moving the device, so I do I fix that? In the error, the location was 4-1 *One test you can make on a functioning system (uri green light flashing) is pull the USB cable from the URI wait a few seconds and plug it back in. If the flashing green does not recover then your SW would not be able to recover from the USB disruptions.* The green light starts flashing like normal after I unplug the USB cable, and plug it back in. Here is the information from the CLI prompt when I do that... [Oct 4 06:35:04] WARNING[4502]: chan_usbradio.c:2073 used_blocks: Error reading output space == Set device 4-1 to usb29912 [Oct 4 06:35:13] WARNING[4503]: chan_usbradio.c:1728 hidthread: Loaded parameters from usbradio_tune_usb29912.conf for device usb29912 . *USB has it?s issues at times. It?s probably not your software but you should update if you haven?t in a while. More likely is the USB bus is getting glitched. There might be an indication of that in dmesg (type dmseg as the Linux prompt).* usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71 usb 4-1: USB disconnect, address 2 usb 4-1: new full speed USB device using uhci_hcd and address 3 usb 4-1: configuration #1 chosen from 1 choice input: C-Media Electronics Inc. USB PnP Sound Device as /class/input/input2 input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.2-1 I did notice that someone or something was trying to "hack" into the box. LOTS of attempts to connect, so I fixed that with a block of the offending IP in iptables, not sure if that has something to do with it or not. Thanks again everyone! -- Steve Denbow | KD8BIW kd8biw(a)gmail.com www.kd8biw.com

1 0

RTCM mix clients
by Tom Caspar 04 Oct '14

04 Oct '14

Finally had a chance to look at this again. I tried resetting both sides after making the changes. No help. Set voter debug level 3 in asterisk and I'm seeing the following message repeatedly scrolling by in a blur when the mix client detects cor. Sequence numbers are continually incrementing by 1. I'm running software version 1.47 on all my clients. mix client (Mulaw) my_client index:0 their seq:629 our seq:629 mix client my_client outa bounds, resetting!! Can you offer any insight on what this debug message means? Thanks, Tom ----- Reply message ----- From: "Tim Sawyer" <tim.sawyer(a)mac.com> To: "Tom Caspar" <tom.caspar(a)cpcomms.com> Subject: [App_rpt-users] (no subject) Date: Mon, Sep 29, 2014 11:22 PM Sometimes you have to restart the RTCM and maybe Asterisk after changing the GPS mode. -- Tim :wq On Sep 29, 2014, at 8:06 PM, Tom Caspar <tom.caspar(a)cpcomms.com<mailto:tom.caspar@cpcomms.com>> wrote: I have a private node with 6 voted receivers usng RTCMs. I'd like to add a 7th RTCM to this node that is always mixed in rather than voted. I'm able to make this rtcm work as a 7th voted rceive with no problem. Everything Ive read seems to indicate that if I change Gps pps polarity to "none" this will achieve my desired results, however I am unable to get audio out of my transmit rtcm from thiis 7th site. It does change color to cyan in Allmon indicating it is non voted input but I do not get any indication or audio when that units COR goes active. Is there something I'm missing? Thanks, Tom _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

3 6

echolink index server
by ea8ee 02 Oct '14

02 Oct '14

after broke the hard drive ti reinstalled the node allstar have noticed that my node is not connected with echolink node index server sometime however before desappears my echolink node in the echolink index i can to connect with every echolink station and the connection is perfectly maintained the with that station though the node but my node echolink is inot seen on the index of echolink -- Enviado desde EA8EE red movil

1 0