November 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Frozen repeater
by mike＠midnighteng.com 20 Nov '14

20 Nov '14

1 0

Re: [App_rpt-users] kernel panic in the cold
by Chris Curtis 19 Nov '14

19 Nov '14

Thanks for all the input. After running 24 hours in the house without a hitch, I'm going to go with sub freezing temperatures as the culprit. I realize I didn't put enough background in my post so here's a little more in case it'll help someone else. Box: Regular old hand me down desktop in a mini tower case. The acid/cent distro from the website link. Old single core processor with HT enabled Traditional spinning platter hard drive (SATA interface) DDR2 ram 3 modified cm108 fobs Shed: Lowest temperature so far 9F Averaging around 33F for the problem period Why didn't I think of this before: Last system I owned/operated was a 3 band repeater with an irlp node onsite. The controller was an ff-800. Only trouble I had in that non climate controlled shack was the ff-800 needed a warming pad draped over the cabinet in the winter. The irlp node/pc never gave me any trouble but the ff-800 would 'talk funny' when it got really cold. Should have remembered this earlier. Again, thanks for the replies, I appreciate it. Just like the well pumphouse, I'll put an incandescent light bulb near the box/fobs and try that. Chris KB0WLF From: mike(a)midnighteng.com [mailto:mike@midnighteng.com] Sent: Tuesday, November 18, 2014 12:56 PM To: Chris Curtis Subject: RE: [App_rpt-users] kernel panic in the cold Chris, If this turns out to be the problem, let me know. I have made many options for such a winter occasion. But be sure to check the cpu reporting of temp to bios and OS. Normally, they are meant to look for overheating not under-heating. But I have problems with the thermistor being out of intended range and that created a problem (disable temp mon in bios). Many low power electronics/cpu's do not function well at sub freezing temps including the sound dongles. ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] kernel panic in the cold From: "Chris Curtis" <demoman(a)rollanet.org> Date: Tue, November 18, 2014 1:19 pm To: <app_rpt-users(a)ohnosec.org> It's cold out in the shed. No climate control at all. Could this be the culprit of my almost immediate kernel panic lockups ? Server/nodes had been running fine over the summer. I've brought the box inside the house and will run it with the dongles attached to see if some heat will fix the problem. Just wondering if anyone else had been experiencing: "kernel panic not synching fatal exception in interrupt"; these past months. Thanks for your time, Chris KB0WLF Chris KB0WLF _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Subject: kernel panic in the cold
by Michael Lussier 19 Nov '14

19 Nov '14

I noticed my repeater is off this morning. I happen to be going up on the mountain this morning. It's 14 degrees here so it's got to be single digits up there at 2500 feet. Will up date later Mike AE4ML Sent from an iPhone 5 iOS 8 Mike.Lussier(a)gmail.com AE4ML(a)arrl.net AE4ML(a)amsat.org

3 3

kernel panic in the cold
by Chris Curtis 19 Nov '14

19 Nov '14

It's cold out in the shed. No climate control at all. Could this be the culprit of my almost immediate kernel panic lockups ? Server/nodes had been running fine over the summer. I've brought the box inside the house and will run it with the dongles attached to see if some heat will fix the problem. Just wondering if anyone else had been experiencing: "kernel panic not synching fatal exception in interrupt"; these past months. Thanks for your time, Chris KB0WLF Chris KB0WLF

4 3

good connection to URI?
by pete M 18 Nov '14

18 Nov '14

Hi guys.. ast week i did a harness to hook my tkr-750 ver 2 to a URI here is what I did: tkr-750 pin ----- uri 8 to 22 (ctcss tone to tkr)9 to 26 (voice to tkr)10 to 21 (audio to uri)12 to 19 (ground)16 to 1 (ptt)17 to 8 (cor) I dont need the cor cause I want to do all the signaling by dsp but still hoocked it up in case.. So does this make sens? cause I cant have the ctcss level right. I try to switch the ctcss and voice from left to right in case I had reverse the wiring.put both channel as tone and voice to test. no go I cant send ctcss from the URI. I know I can send it from the repeater itself.. But I want to control when it is sent. Thanks for taking the time to help me ;-)

3 4

Update to gmail failure
by Robert Newberry 18 Nov '14

18 Nov '14

A while back I stated up an email script on my node. For about a month once a week my node would get locked out of gmail and I'd have to log into the Web site and unlock the account. I tried everything that people suggested to no avail. It just dawned on me the other day it's been two months and I haven't had a hitch with my my email updates from the node. So it appears whatever was going on corrected itself. Strange I know!

1 0

Video on setting up Allstar
by Skyler Fennell 17 Nov '14

17 Nov '14

Hi everyone, Been working in this YouTube video for beginners on setting up Allstar link. I have it unlisted for now, waiting if I need to edit it for various reasons (ex if I have incorrect info or something someone wants to add) before I release to general public. So here is the link to part one, part two will hopefully come soon. https://m.youtube.com/watch?v=jJa0Rsj3ZyY Tell me if you have any comments, thoughts, or if I should make any changes, and ideas for the next videos. 73 Skyler KDØWHB

1 0

Re: [App_rpt-users] Show link topology from cli?
by Bryan Fields 17 Nov '14

17 Nov '14

On 11/16/14, 1:11 AM, Doug Crompton wrote: > I am not sure this is exactly what you want but if you want to see what a node > is connected to along with information on each node 'lsnodes' will do that to > any node via the web. It is built into the BBB. All you need to do is route > port 80 (or whatever port you have the http servr on) and access the node with > a web browser. Locally you can do it without forwarding a port. I'm not running a web server or have a BBB(?). I know there is a bubble map that the stats.allstarlink.org draws, but how can I get this data out of asterisk directly? I can figure out my directly connected neighbors, but how can I figure out who's connected to them? Think of it like looking at OSPF neighbors vs. looking at the OSPF database on a router. I want to see the database. Thanks, -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

3 5

Installation And configuration of URIs with asterisk app_rpt
by Salik Satti 17 Nov '14

17 Nov '14

Hi All, I want to use DMK URIs with asterisk. But i am facing issues regarding installation and configuration of a node with ACID. Please help me in this regard. Thanks in advance. Salik Mumtaz Satti, A-EXEN National Radio And Telecommunication Corporation, Haripur Pakistan www.nrtc.com.pk salik.satti(a)nrtc.com.pk Contact: +923155414048 Skype: salik.satti6

2 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 69, Issue 27
by Corey 16 Nov '14

16 Nov '14

Chuck, I fixed all my issues. I didn't realize the difference between a NMEA & Garmin sentence. I deselected all sentences that started with "P" in the SNSRCFG program, reloaded the GPS file, and my warning went away. I was able to update the firmware with your advice. Thanks again for your help, Corey On 11/14/2014 11:51 PM, app_rpt-users-request(a)ohnosec.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: EchoLink Policy Reminder (Johnny Keeker) > 2. Voter board (Corey) > 3. Re: Voter board (Chuck Henderson) > 4. Re: Voter board (Chuck Henderson) > 5. Re: Voter board (Chuck Henderson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 14 Nov 2014 14:44:54 -0800 > From: Johnny Keeker <cypresstower(a)yahoo.com> > To: kk6ecm <kk6ecm(a)gmail.com>, Kirk Just Kirk <wb6egr(a)gmail.com> > Cc: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] EchoLink Policy Reminder > Message-ID: > <1416005094.33956.YahooMailBasic(a)web163604.mail.gq1.yahoo.com> > Content-Type: text/plain; charset=iso-8859-1 > > When they kill our accounts we'll say EchoStink Stunk > -------------------------------------------- > On Tue, 11/11/14, Kirk Just Kirk <wb6egr(a)gmail.com> wrote: > > Subject: Re: [App_rpt-users] EchoLink Policy Reminder > To: "kk6ecm" <kk6ecm(a)gmail.com> > Cc: "app_rpt mailing list" <app_rpt-users(a)ohnosec.org> > Date: Tuesday, November 11, 2014, 7:08 PM > > They can > close/kill my account anytime. EchoStink sounds horrible > most of the time...constant drivebys from dingalings that > connect and disconnect over and over and say nothing...or > connect at 3 in the morning and call CQ CQ. For 5 > minutes.....I am so tired of that shit I could delete it > tonight. > > > On Nov 11, 2014 2:00 > PM, "kk6ecm" <kk6ecm(a)gmail.com> > wrote: > Can anyone shed light > on this Echolink requirement and Allstar? I'm not sure > what makes us compliant. We have Echolink enabled on our > repeater... I know of no way a non-ham could link in during > an Echolink connection. Is there a way of setting app_rpt so > an Echolink connection precludes all others? Also, Echolink > has Apps for the PC, Android, and the iPhone/iPad... Their > PC app (phones are RF, but not ham) seems to invalidate > their rf only policy, although they do verify a license > before granting a node number. What am I missing? > > Thanks,Bobkk6ecm > Sent from iPad > > ---------- Forwarded > message ---------- > From: EchoLink Support > <support(a)echolink.org> > Date: Wed, Sep 3, 2014 at 9:14 AM > Subject: EchoLink Policy Reminder > To: > > > We wanted to remind you of an important item in > EchoLink's access policies (which can be found online at > http://www.echolink.org/access_policies.htm) > > > > In general, EchoLink does not permit cross-linking. > > > > More specifically, EchoLink does not permit cross-linking > with other VoIP systems that can be accessed off-the-air > (for example, directly from a PC or Web browser).? This is > because other systems may have a validation procedure that > is far less comprehensive than EchoLink's, and we want > to continue to ensure that EchoLink is solely for use by > licensed Amateur Radio operators around the world. > > > > Therefore, while excellent systems such as Zello, AllStar, > eQSO, WIRES-II, etc. all serve an important purpose within > the Amateur Radio community, our policy is that they cannot > be directly connected to a registered EchoLink node. > > > > In other words, your node must function only as a direct RF > gateway, and not as a cross-link to another system. If your > node is reachable through another path, that path must be > disabled when an EchoLink connection is in progress. For > example, an EchoIRLP node is permitted, since it functions > only as an RF gateway when an EchoLink connection is > made. > > > > If you are running Asterisk with app_rpt and an EchoLink > channel, be sure it is configured not to allow other VoIP > connections when an EchoLink station is connected. If this > isn't practical, please disable the EchoLink channel. > > > > Thanks for ensuring that your node adheres to this policy. > In some cases we do restrict logins to be sure the policy is > being followed. > > > > 73 > > EchoLink Support > > > > (Note: This mailbox is not able to handle replies. For help > and information, please see www.echolink.org/support.htm) > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email > address and press the "Unsubscribe or edit options > button" > > You do not need a password to unsubscribe, you can do it via > email confirmation. If you have trouble unsubscribing, > please send a message to the list detailing the problem. > > -----Inline Attachment Follows----- > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list > please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your > email address and press the "Unsubscribe or edit > options button" > You do not need a > password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send > a message to the list detailing the problem. > > > > ------------------------------ > > Message: 2 > Date: Fri, 14 Nov 2014 23:10:57 -0700 > From: Corey <kc7mrq(a)bresnan.net> > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Voter board > Message-ID: <5466EE71.1090107(a)bresnan.net> > Content-Type: text/plain; charset=utf-8; format=flowed > > > I built a through hole voter board and interfaced it to a GPS 18 LVC and > my server. I set the board up as a master, transmit. The LED shows the > GPS locked and 98 command shows the GPS, > but I am getting the following error when telnetting into the board: > > Warning: GPS Data time period elapsed. > > The error is timestamped and occurs every second. I made sure the data > format was NMEA per archived messages on here by connecting the GPS to > SNSRCFG. The config appears to be set up correctly. > What other areas do I need to look at to fix this warning? > > I did notice you can choose quite a few NMEA messages in the SNSRCFG > profile. Does it matter if all are checked? > > I have a second issue with updating the firmware. The board is at Rev > 1.41. I tried updating it, but haven't had any luck so far. Nothing > happens when I click on the "capture target" button after resetting the > voter board. The target ip is the voter board and the bootloader ip in > the voter is my laptop with ENC_Loader. > > The IC(s) were originally programmed by a friend in another state so I > never experienced what it take to do the initial programming. > > > Thanks for your help, > Corey > > > ------------------------------ > > Message: 3 > Date: Sat, 15 Nov 2014 00:27:46 -0600 > From: Chuck Henderson <rpt2(a)chuck.midlandsnetworking.com> > To: Corey <kc7mrq(a)bresnan.net> > Cc: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Voter board > Message-ID: > <CADEYVwj=UeTqkKzfERG8Oz+Rj+XZKYH649TCjaYYqtoUFoQ7og(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > set the bootloader IP to be the same as the voter board IP, or make it > different than anything else on the network. It is the IP that the voter > board uses when it is running the bootloader code. It can not have the > same IP as your laptop. That will not work. > > On Sat, Nov 15, 2014 at 12:10 AM, Corey <kc7mrq(a)bresnan.net> wrote: > >> I built a through hole voter board and interfaced it to a GPS 18 LVC and >> my server. I set the board up as a master, transmit. The LED shows the GPS >> locked and 98 command shows the GPS, >> but I am getting the following error when telnetting into the board: >> >> Warning: GPS Data time period elapsed. >> >> The error is timestamped and occurs every second. I made sure the data >> format was NMEA per archived messages on here by connecting the GPS to >> SNSRCFG. The config appears to be set up correctly. >> What other areas do I need to look at to fix this warning? >> >> I did notice you can choose quite a few NMEA messages in the SNSRCFG >> profile. Does it matter if all are checked? >> >> I have a second issue with updating the firmware. The board is at Rev >> 1.41. I tried updating it, but haven't had any luck so far. Nothing happens >> when I click on the "capture target" button after resetting the voter >> board. The target ip is the voter board and the bootloader ip in the voter >> is my laptop with ENC_Loader. >> >> The IC(s) were originally programmed by a friend in another state so I >> never experienced what it take to do the initial programming. >> >> >> Thanks for your help, >> Corey >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ >> mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. >> Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >

1 0