November 2014 - App_rpt-users - lists.keekles.org

Portanode
by Robert Newberry 06 Nov '14

06 Nov '14

I've had this vision of making a portable simplex node that I could take anywhere and use my wifi broadcast feature on my Android phone. I figured a BBB would fit the bill. I'm not totally up in everything available networking wise. Would it make more sense to use something that plugs into the ethernet port of the BBB that would pick up the wifi? Does such a device exist? Or just plug some sort of wifi device into the USB of of the BBB. Thank you

3 3

Re: [App_rpt-users] mooving a tkr 750 frequency
by Geoff 05 Nov '14

05 Nov '14

I'd retune the repeater. At least the reciever . That's the easiest. His cans are already tuned. <div>-------- Original message --------</div><div>From: pete M <petem001(a)hotmail.com> </div><div>Date:11/05/2014 08:48 (GMT-06:00) </div><div>To: APP RPT <app_rpt-users(a)ohnosec.org> </div><div>Subject: [App_rpt-users] mooving a tkr 750 frequency </div><div> </div>Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + And my friend MSR2000 is failling on him.. So I was wondering if he could use my tkr-750 for his frequency 146.790 - with out having to retune the repeater cause it is temporary but still have fair/good performance out of the tkr750? it is a large difference switching from RX 147.720 to 146.190 (1.530 mhz) but is it that much too large? Thaks for your feedback..

1 0

mooving a tkr 750 frequency
by pete M 05 Nov '14

05 Nov '14

Got a tkr 750 waiting for a spot, and is already tuned to 147.120 + And my friend MSR2000 is failling on him.. So I was wondering if he could use my tkr-750 for his frequency 146.790 - with out having to retune the repeater cause it is temporary but still have fair/good performance out of the tkr750? it is a large difference switching from RX 147.720 to 146.190 (1.530 mhz) but is it that much too large? Thaks for your feedback..

2 1

SYBA USB sound adapter modification.
by Kevin Custer 04 Nov '14

04 Nov '14

Here is another article that details the construction of a USB radio interface from a SYBA UAUD71 USB sound adapter. This one makes use of Chuck Kelsey's circuit board and an inexpensive plastic case. http://www.repeater-builder.com/voip/voip-index.html Scroll down to the bottom of the page and click the SYBA UAUD71 link. (other articles for other devices are also listed) Comments, questions, and constructive criticisms welcomed in private email. Thanks, Kevin Custer - W3KKC

1 0

Serial communication
by Skyler Fennell 01 Nov '14

01 Nov '14

I have a pk232 packet TNC and a computer with a serial port. I would like to be able to control the pk232 from my computer used for Allstar via a terminal for serial communication, and eventually might want to integrate the packet stuff with Allstar. Is there a simple centOS program to communicate with serial ( 1200 or 9600 baud, standard protocol etc.)? And yes, my computer has a serial port, not usb to serial. Thanks Skyler KDØWHB

2 1

Re: [App_rpt-users] Gps18 lvc
by mike＠midnighteng.com 01 Nov '14

01 Nov '14

1 0

Gps18 lvc
by COREY BADGLEY 01 Nov '14

01 Nov '14

I purchased two garmin 18 lvc to hook to a rtcm. No data output on rxd or pps when I apply 5v. Is there a step I a step I am missing when hooking them up? Best regards, Corey Badgley

1 0

connecting on private node number from an allstar node
by pete M 01 Nov '14

01 Nov '14

Ok I amsure it has been discussed before.. but google is not my friend tonight.. So I got that private node at a fix ip on the net.the port it run on is 4570 (4569 was not available cause of an asterisk pbx on the smae network) the node number is 1100 I know I have to add this to the node stanza in rpt.conf 1100 = radio@ipadressofthenode:4570/1100,NONE But do I have to add something else somewhere? I was under the impression I had to add something in extension.conf? Thanks for the help ve2pf

3 3