August 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Web transceiver node display
by mike＠midnighteng.com 19 Aug '14

19 Aug '14

2 1

Re: [App_rpt-users] Web transceiver node display
by mike＠midnighteng.com 19 Aug '14

19 Aug '14

6 9

mini-ITX combo
by k5tra 19 Aug '14

19 Aug '14

Tim, Take a look at Biostar mini-ITX boards offered at Newegg: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE <http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BEST MATCH&Description=biostar+combo+mini-itx&N=-1&isNodeId=1> &DEPA=0&Order=BESTMATCH&Description=biostar+combo+mini-itx&N=-1&isNodeId=1 I've had good luck with several different ones. The latest one was <http://www.newegg.com/Product/Product.aspx?Item=N82E16813138393&cm_re=biost ar_combo_mini-itx-_-13-138-393-_-Product> BIOSTAR NM70I-1037U Intel Celeron 1037U Dual-Core 1.8GHz Intel NM70 Mini ITX Motherboard/CPU/VGA Combo. Tom

1 0

Audio problem with URI
by Mike Lussier 19 Aug '14

19 Aug '14

I can pass audio out to the network but I can't receive anything more than a dead carrier. I unplugged the URI using a test amplifier and had the system send some system ID and time messages. I get nothing out of the URI. I probed pins 22 and 23 is this a URI issue ( New out of the box ) or something in software ?? Mike AE4ML -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

5 5

Re: [App_rpt-users] Allstar stats
by mike＠midnighteng.com 19 Aug '14

19 Aug '14

2 1

Allstar stats
by kk6ecm 18 Aug '14

18 Aug '14

We did a little math on the statics from our Allstar repeater, and it appears as though we are experiencing a lot of kerchunking. Are the stats fixed, or do we have some latitude in what is collected? If so, we'd like to understand how to use them. I did check online, but have not found anything on the web or druple. Thanks, Bob kk6ecm Sent from iPad

1 0

Allstar Status - issue?
by Keith Goobie 18 Aug '14

18 Aug '14

Good day all. This may have been covered already... My apologies if this is a repeat. I am trying to get a text based status for an individual node. I am incorporating into a status page for our repeater systems. Either browsing directly or nested in another web page I do: http://stats.allstarlink.org/nodeinfo.cgi?node=29133 I get: Error! Cannot open DB file for read I sense that this problem is also impacting the bubble map generation. Would like to get a status surrounding the issue. I am expectation setting for our user base. Thanks to all in the allstar network for all that they have made available. Keith -- keith(a)goobie.org Keith Goobie Richmond Hill, ON, CANADA

4 6

intermitten TX audio
by jumping_jackass＠yahoo.com 18 Aug '14

18 Aug '14

Hello, I am looking for help with several nodes that i have built who's tx audio have become intermitten or stopped working all together. I have built a 5 node system consisting of 4 GM300 radios and a DH-RBI-1. Each of the 4 GM300 radios are wired to a DMK-URI. Each of these radio's initially allowed me to recieve and transmit fine using the veris featues of the "radio-tune" test program. But now they no longer pass audio, They still key the transmitter and recieve fine but no longer pass voice or ctcss audio anymore. Once in a great while they pass audio sounding like a loose connection. I built a second system consisting of a PC and a DMK-URI that plugs directly into my current RLC-3 repeater controller port. That system did the same thing worked for a while and than passes no audio on xmit. Any direction at all from others would be helpfull. Thank you Pursuant to U.S. Code, title 47, Chapter 5, Sub-chapter II, ß227, "Any and all non-solicited commercial E-mail sent to this address is subject to a download and archival fee of $500.00 U.S.". E-mailing denotes acceptance of these terms.

1 0

Re: [App_rpt-users] DTMF digits on IaxRpt
by Bryan Fields 18 Aug '14

18 Aug '14

On 8/14/14, 9:24 AM, Bryan D. Boyle wrote: > The issue is *why* is it so danged important to have the A-D keys decoded? > security through obscurity? Because they are there on ham mics? > > No one has really described a use case for why this artifact of the whole dtmf > protocol is really needed. especially when, with the asterisk system, there > is almost an unlimited functionality with using just the 10 digits bracketed > by the star and octothorpe. Ah, the octothorpe! Really, why can't we just make it an option? It's not hurting anything to give people the option. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

5 5

Re: [App_rpt-users] Audio problem with URI
by Bob 17 Aug '14

17 Aug '14

Sounds familiar to my experience... bought a relatively new motherboard, but had to find an older configuration motherboard for the ACID build to interface properly with the audio; digital worked fine. At first I thought the uri was bad... not the case. uridiag worked fine with the older configuration board, but not the new. True for both URI and URIx, which use different loop back plug. So, I recommend testing the uri on a known good ACID install (read that as on compatible hardware). I've built several since. I load ACID, stop asterisk and run uridiag to determine if I can get it to work with the ACID build, even trying manipulating the BIOS settings, when it does not work. Since Hubs don't use audio interface, it is not an issue. There is a CentOS 6.x ACID build out there, but Jim says they have not gotten it to work with the newer audio drivers. Thanks, Bob kk6ecm Sent from iPad On Aug 17, 2014, at 3:01 PM, Mike Lussier <mike.lussier(a)gmail.com> wrote: Bob, I just downloaded the diag program and briefly looked at the paperwork. My thought too was to build the interface and test the device. Yes this is a new setup. This is a second HD on an existing system to test the waters. I thought they were clear until I realized it wasn't any miss cabling on my part. just no audio from the URI that was the fault. The computer is a Dell about 2 years old. here in the shack. 8 GB ram and its a 750gb HD for the project. I will move it to a new computer next weekend if I can figure this out. More info after I run the test later this week. I have closed up shop and grabbed a cold one to end the weekend. 73 Mike AE4ML On Sun, Aug 17, 2014 at 5:52 PM, kk6ecm <kk6ecm(a)gmail.com> wrote: Please tell us about the system... new ACID build on a new computer? If so, it could be an incompatibility with of CentOS and the computer chip set. Have you used the uridiag test routine from the dmk website to test the URI on the same computer? Remember to stop asterisk before executing uridiag. They both want control of Linux. Thanks, Bob kk6ecm Sent from iPad On Aug 17, 2014, at 2:35 PM, Mike Lussier <mike.lussier(a)gmail.com> wrote: I can pass audio out to the network but I can't receive anything more than a dead carrier. I unplugged the URI using a test amplifier and had the system send some system ID and time messages. I get nothing out of the URI. I probed pins 22 and 23 is this a URI issue ( New out of the box ) or something in software ?? Mike AE4ML -- "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan

1 0