August 2014 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 66, Issue 22
by Bradley Haney 14 Aug '14

14 Aug '14

When talking from echolink to asterisk the audio appears to drop completely out enough to make the courtesy tone beep for linkunkeyct... On Thu, Aug 14, 2014 at 8:24 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. Re: Bad echolink Audio (Bob) > 2. Re: DTMF digits on IaxRpt (Skyler F) > 3. Re: DTMF digits on IaxRpt (Bryan D. Boyle) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 13 Aug 2014 20:15:28 -0700 > From: "Bob" <kk6ecm(a)gmail.com> > To: "'Bradley Haney'" <hammin75(a)gmail.com>, > <app_rpt-users(a)ohnosec.org> > Subject: Re: [App_rpt-users] Bad echolink Audio > Message-ID: <1569B2555B344E4F9727C314470D8A00@ThePykesHP> > Content-Type: text/plain; charset="us-ascii" > > Not sure what you mean by choppy, but if the input from the internet over > drives the software gains, that could happen. Have you adjusted your > Echolink gains in echolink.conf? > > > > I had to adjust ours as follows because incoming and outgoing seemed to be > over driven. At the suggestion of this list my first estimate was -6.0 and > 0.0 respectively. > > erxgain=-7.0 ;-3.0 default > > etxgain=-1.0 ; 3.0 default > > > > Bob > > kk6ecm > > _____ > > From: app_rpt-users-bounces(a)ohnosec.org > [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Bradley Haney > Sent: Wednesday, August 13, 2014 7:56 PM > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Bad echolink Audio > > > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:15046 rpt: [28079] > link=3200615/echolink/el0-0 TIMEOUT rxlingertimer > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16628 rpt: node=28079 hnr=0 > link=3200615/echolink/el0-0 got AFC=12 data= > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16671 rpt: node=28079 > link=3200615/echolink/el0-0 ACRK data=(null) > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16699 rpt: [28079] > link=3200615/echolink/el0-0 ACRK data= set l->lastrealrx > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:15046 rpt: [28079] > link=3200615/echolink/el0-0 TIMEOUT rxlingertimer > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16628 rpt: node=28079 hnr=0 > link=3200615/echolink/el0-0 got AFC=12 data= > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16671 rpt: node=28079 > link=3200615/echolink/el0-0 ACRK data=(null) > > [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16699 rpt: [28079] > link=3200615/echolink/el0-0 ACRK data= set l->lastrealrx > > > > > > Anyone have any idea why audio from ECHOLINK comes in choppy i have > tried to adjust everything i could think of.. I am using xipar.. I tried it > on 2 different machines and both are choppy.. But audio form asterisk to > echo link seems fine.. > > > > > > I see something above that says timeout rxlinger timer but don't know how > to adjust that if that is even it > > > > > > bradley > >

1 0

DTMF digits on IaxRpt
by larry 14 Aug '14

14 Aug '14

If using IaxRpt control panel can anyone explain how to dial DTMF digits A,B,C,D? I don't mean the propagation issue. I mean the keypad is only a 12 button keypad not a 16 key. Anyone know a way to add the other 4 buttons (A,B,C,D) or send their tones as if they are being dialed from the keypad? Larry - N7FM

5 6

Bad echolink Audio
by Bradley Haney 14 Aug '14

14 Aug '14

[Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:15046 rpt: [28079] link=3200615/echolink/el0-0 TIMEOUT rxlingertimer [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16628 rpt: node=28079 hnr=0 link=3200615/echolink/el0-0 got AFC=12 data= [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16671 rpt: node=28079 link=3200615/echolink/el0-0 ACRK data=(null) [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16699 rpt: [28079] link=3200615/echolink/el0-0 ACRK data= set l->lastrealrx [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:15046 rpt: [28079] link=3200615/echolink/el0-0 TIMEOUT rxlingertimer [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16628 rpt: node=28079 hnr=0 link=3200615/echolink/el0-0 got AFC=12 data= [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16671 rpt: node=28079 link=3200615/echolink/el0-0 ACRK data=(null) [Aug 13 21:51:49] NOTICE[16350]: app_rpt.c:16699 rpt: [28079] link=3200615/echolink/el0-0 ACRK data= set l->lastrealrx Anyone have any idea why audio from ECHOLINK comes in choppy i have tried to adjust everything i could think of.. I am using xipar.. I tried it on 2 different machines and both are choppy.. But audio form asterisk to echo link seems fine.. I see something above that says timeout rxlinger timer but don’t know how to adjust that if that is even it bradley

2 1

Re: [App_rpt-users] Web transceiver auth
by Bryan Fields 14 Aug '14

14 Aug '14

Never mind, I'm stupid. Fixed it with a single command. mv extentions.conf extensions.conf On 8/13/14, 9:58 PM, Bryan Fields wrote: > I'm trying to get the web transceiver going on my node (40821) for some testing. -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Web transceiver auth
by Bryan Fields 14 Aug '14

14 Aug '14

Hi all, I'm trying to get the web transceiver going on my node (40821) for some testing. I'm seeing the error: [Aug 13 21:11:53] NOTICE[5180]: chan_iax2.c:9471 socket_process: Rejected connect attempt from 107.17.118.194, request 's@allstar-public' does not exist Iax2 debug is below. I think it's some kinda auth issue, but I'm not an expert by any means. I have the allstar-public user setup up in extentions.conf per the portal generated config. Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00000ms SCall: 04658 DCall: 00000 [107.17.118.194:54874] VERSION : 2 CALLED NUMBER : s CALLING NUMBER : 40821 CALLING NAME : c3af3e019916 USERNAME : allstar-public FORMAT : 4 CODEC_PREFS : (ulaw) Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00005ms SCall: 06398 DCall: 04658 [107.17.118.194:54874] Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00008ms SCall: 06398 DCall: 04658 [107.17.118.194:54874] AUTHMETHODS : 2 CHALLENGE : 145805606 USERNAME : allstar-public Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: AUTHREP Timestamp: 00046ms SCall: 04658 DCall: 06398 [107.17.118.194:54874] USERNAME : allstar-public MD5 RESULT : EA2B0D6A59969E38A94457D4845CEB68 Tx-Frame Retry[-01] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: ACK Timestamp: 00046ms SCall: 06398 DCall: 04658 [107.17.118.194:54874] Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: REJECT Timestamp: 00048ms SCall: 06398 DCall: 04658 [107.17.118.194:54874] CAUSE : No such context/extension CAUSE CODE : 3 Rx-Frame Retry[ No] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: ACK Timestamp: 00048ms SCall: 04658 DCall: 06398 [107.17.118.194:54874] Rx-Frame Retry[ No] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: HANGUP Timestamp: 25285ms SCall: 04658 DCall: 06398 [107.17.118.194:54874] CAUSE CODE : 16 Rx-Frame Retry[Yes] -- OSeqno: 002 ISeqno: 002 Type: IAX Subclass: HANGUP Timestamp: 25285ms SCall: 04658 DCall: 06398 [107.17.118.194:54874] CAUSE CODE : 16 Config from extentions.conf [allstar-public] exten => s,1,Ringing exten => s,n,Set(RESP=${CURL(https://register.allstarlink.org/cgi-bin/authwebphone.p… exten => s,n,Set(NODENUM=${CALLERID(number)}) exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit) exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit) exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit) exten => s,n,Set(CALLSIGN=${RESP:5}) exten => s,n,Wait(3) exten => s,n,Playback(rpt/node|noanswer) exten => s,n,Saydigits(${NODENUM}) exten => s,n,Set(CALLERID(name)=${CALLSIGN}) exten => s,n,Set(CALLERID(num)=0) exten => s,n,Rpt(${NODENUM}|X) exten => s,n,Hangup exten => s,n(hangit),Answer exten => s,n(hangit),Wait(1) exten => s,n(hangit),Hangup -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0

Question for the group.
by Mike Lussier 14 Aug '14

14 Aug '14

Has anyone tried successfully loaded the software to a raspberry pi ? Thank you Mike -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

3 2

Re: [App_rpt-users] New guy::
by Tim Sawyer 13 Aug '14

13 Aug '14

I just did an install. There is no flaw as far as I can tell. -- Tim :wq On Aug 13, 2014, at 11:44 AM, Mike Lussier <mike.lussier(a)gmail.com> wrote: > Flaw in the IOS image. unable to download post install script se1.sh > > internet connectivity is there. network is reachable > > > > > On Wed, Aug 13, 2014 at 2:19 PM, Mike Lussier <mike.lussier(a)gmail.com> wrote: > Thanks Tim, > This is the third time installing the software. > > install formats the drive, no questions ! > tells me to remove the CD and reboots > goes through the boot up sequence > Asks me about DHCP or static. > then goes to the log in prompt.. > > > hmmmm 3x at this and no go. > > > > > On Wed, Aug 13, 2014 at 2:00 PM, Tim Sawyer <tim.sawyer(a)mac.com> wrote: > Welcome new guy. That is the first question new guys have. That’s the linux login prompt. The user ID is root and the password is whatever you picked during the install. See http://ohnosec.org/drupal/node/186 > > Of course that’s only the beginning. Once you login the real confusion starts :-) > -- > Tim > :wq > > On Aug 13, 2014, at 10:23 AM, Mike Lussier <mike.lussier(a)gmail.com> wrote: > >> How do you get past the login screen on the linux OS ? >> >> CentOS release 5.7 (Final) >> Kernel 2.6.18-274.el5PAE on an i686 >> >> test login: >> >> >> -- >> "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > > > > -- > "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan > > > > > > -- > "We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan > >

1 0

Host Name Change
by KJ6KO 13 Aug '14

13 Aug '14

I know I have done this before, but I'm drawing a blank... Either what file is the host name in or a simple command to change it? Tried a couple recommendations from the web,but didn't work. Thanks.. __________ Information from ESET NOD32 Antivirus, version of virus signature database 10249 (20140813) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

2 1

New guy::
by Mike Lussier 13 Aug '14

13 Aug '14

How do you get past the login screen on the linux OS ? CentOS release 5.7 (Final) Kernel 2.6.18-274.el5PAE on an i686 test login: -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

2 1

Re: [App_rpt-users] node list update issues?
by Bryan Fields 12 Aug '14

12 Aug '14

it's working now, don't know what it was. Maybe server issue, or it not liking my 44/8 ip space. On 8/11/14, 1:00 AM, Bryan Fields wrote: > Anyone else seeing an Error 403 from the update script? > > I'm seeing this on all the servers (nodes1-4) > > wget http://nodes3.allstarlink.org/cgi-bin/nodes.pl > --2014-08-11 00:58:25-- http://nodes3.allstarlink.org/cgi-bin/nodes.pl > Resolving nodes3.allstarlink.org... 65.110.110.172 > Connecting to nodes3.allstarlink.org|65.110.110.172|:80... connected. > HTTP request sent, awaiting response... 403 > 2014-08-11 00:58:25 ERROR 403: (no description). > -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

1 0