September 2014 - App_rpt-users

Where is the echolink "text greeting" Page
by Skyler F 11 Sep '14

11 Sep '14

When I connect from an echolink client capable of veiwing the text, it says "Welcome to Allstar node *x* Echo-link node *y* Number *z* Stations connected" I really like all of that stuff how it is, I just want to add some text on top of it. Does anybody know where the file is? On another subject is there a way to transmit a greeting when someone connects to the connecting station, but not anywhere else? (be it allstar or echolink) For example, I have 2 nodes connected. When the third one connects, a greeting is played to the third node, but not anybody else (not on the local repeater or to any of the two nodes already connected) *73* *Skyler KDØWHB* -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

2 2

Re: [App_rpt-users] Ideas (Mobile App)
by mike＠midnighteng.com 11 Sep '14

11 Sep '14

1 0

Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
by kk6ecm 11 Sep '14

11 Sep '14

Understand. I did not get this picture before. Perhaps there is someone on the list that understands the compiler compatibility requirements. This is beyond my capability. Thanks, Bob kk6ecm Sent from iPad > On Sep 9, 2014, at 11:13 AM, pete M <petem001(a)hotmail.com> wrote: > > I cant use the acid.iso cause the computer is in a remote place ( rented server) and they dont supply special OS installation. I can have fedore ubuntu centos on many flavor (x86 or 64 bit) and many revision... The problem is not the loading od the cd are other things like that.. > > I am sure that the kernel is too new and there is a part of zaptel that need a depricated fonction If I am not crazy.. > > > > From: kk6ecm > Sent: Tuesday, September 09, 2014 1:40 PM > To: APP RPT > Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4 > > I use this when ACID will not load, usually due to issues with BIOS and network drivers. I was assuming you were not able to get ACID to load on you computer. If your running phase2.sh was a second attempt after trying to load ACID, you may need to check that all the files are there because the load deletes some files. In short, if this occurred during an attempt to load the ACID download, I'd just try it again. > > Thanks, > Bob > kk6ecm > > Sent from iPad > > >> On Sep 9, 2014, at 8:27 AM, pete M <petem001(a)hotmail.com> wrote: >> >> Ok will try that.. >> >> thanks! >> >> >> From: Bob >> Sent: Tuesday, September 09, 2014 10:55 AM >> To: 'APP RPT' >> Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4 >> >> I’ve done this several times without issue. Here are the steps I used. >> >> >> >> Load CentOS 5.10 downloaded from CentOS website >> >> No features, tools only, no desktop (competes with Asterisk) >> >> Set ssh /etc/ssh/sshd_config >> >> Run "setup" at comand line and disable firewall >> >> vi /etc/rc.d/acidrepo >> >> http://dl.allstarlink.org >> >> Execute portion of ks.cfg, each line at a time >> >> cp /etc/rc.d/rc.local /etc/rc.d/rc.local.orig >> >> cat <<EOF >>/etc/rc.d/rc.local >> >> >> >> cd /etc/rc.d; rm -f phase1.sh; wget -q http://dl.allstarlink.org/installcd/phase1.sh >> >> >> >> chmod 755 /etc/rc.d/phase1.sh >> >> >> >> /etc/rc.d/phase1.sh >> >> Auto reboot after phase1.sh executed >> >> phase2.sh runs automatically to completion >> >> >> >> Bob >> >> kk6ecm >> >> >> >> From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of pete M >> Sent: Tuesday, September 09, 2014 7:00 AM >> To: APP RPT >> Subject: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4 >> >> >> >> Need help to install an allstarlink node that wont have any radio on it in a data center to be my central reflector for my french network of repeater around Quebec Canada.. >> >> >> >> I did try to run phase2.sh from /etc/rc.d/ but this fail when compiling. >> >> >> >> here is the out put from the script >> >> >> >> sh phase2.sh >> >> ****** Phase 2 post install ****** >> >> Getting asterisk install script from http://dl.allstarlink.org../. >> >> Getting files.tar.gz from http://dl.allstarlink.org../. >> >> ****** Asterisk Installation ****** >> >> /etc/rc.d/astinstall.sh: line 11: ntpdate: command not found >> >> Unpacking files.tar.gz... >> >> Compiling Zaptel... >> >> checking for gcc... gcc >> >> checking for C compiler default output file name... a.out >> >> checking whether the C compiler works... yes >> >> checking whether we are cross compiling... no >> >> checking for suffix of executables... >> >> checking for suffix of object files... o >> >> checking whether we are using the GNU C compiler... yes >> >> checking whether gcc accepts -g... yes >> >> checking for gcc option to accept ISO C89... none needed >> >> checking how to run the C preprocessor... gcc -E >> >> checking for a BSD-compatible install... /usr/bin/install -c >> >> checking whether ln -s works... yes >> >> checking for GNU make... make >> >> checking for grep... /bin/grep >> >> checking for sh... /bin/sh >> >> checking for ln... /bin/ln >> >> checking for wget... /usr/bin/wget >> >> checking for grep that handles long lines and -e... (cached) /bin/grep >> >> checking for egrep... /bin/grep -E >> >> checking for ANSI C header files... yes >> >> checking for sys/types.h... yes >> >> checking for sys/stat.h... yes >> >> checking for stdlib.h... yes >> >> checking for string.h... yes >> >> checking for memory.h... yes >> >> checking for strings.h... yes >> >> checking for inttypes.h... yes >> >> checking for stdint.h... yes >> >> checking for unistd.h... yes >> >> checking for initscr in -lcurses... no >> >> checking for initscr in -lncurses... no >> >> checking for newtBell in -lnewt... no >> >> checking for usb_init in -lusb... no >> >> configure: creating ./config.status >> >> config.status: creating build_tools/menuselect-deps >> >> config.status: creating makeopts >> >> config.status: creating build_tools/make_firmware_object >> >> configure: *** Zaptel build successfully configured *** >> >> make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect' >> >> checking build system type... i686-pc-linux-gnu >> >> checking host system type... i686-pc-linux-gnu >> >> checking for gcc... gcc >> >> checking for C compiler default output file name... a.out >> >> checking whether the C compiler works... yes >> >> checking whether we are cross compiling... no >> >> checking for suffix of executables... >> >> checking for suffix of object files... o >> >> checking whether we are using the GNU C compiler... yes >> >> checking whether gcc accepts -g... yes >> >> checking for gcc option to accept ANSI C... none needed >> >> checking for GNU make... make >> >> checking for asprintf... yes >> >> checking for getloadavg... yes >> >> checking for setenv... yes >> >> checking for strcasestr... yes >> >> checking for strndup... yes >> >> checking for strnlen... yes >> >> checking for strsep... yes >> >> checking for strtoq... yes >> >> checking for unsetenv... yes >> >> checking for vasprintf... yes >> >> checking how to run the C preprocessor... gcc -E >> >> checking for egrep... grep -E >> >> checking for ANSI C header files... yes >> >> checking for sys/types.h... yes >> >> checking for sys/stat.h... yes >> >> checking for stdlib.h... yes >> >> checking for string.h... yes >> >> checking for memory.h... yes >> >> checking for strings.h... yes >> >> checking for inttypes.h... yes >> >> checking for stdint.h... yes >> >> checking for unistd.h... yes >> >> checking for initscr in -lcurses... no >> >> checking for initscr in -lncurses... no >> >> checking for pkg-config... No >> >> configure: creating ./config.status >> >> config.status: creating makeopts >> >> config.status: creating autoconfig.h >> >> configure: configuring in mxml >> >> configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' --cache-file=/dev/null --srcdir=. >> >> checking for gcc... gcc >> >> checking for C compiler default output file name... a.out >> >> checking whether the C compiler works... yes >> >> checking whether we are cross compiling... no >> >> checking for suffix of executables... >> >> checking for suffix of object files... o >> >> checking whether we are using the GNU C compiler... yes >> >> checking whether gcc accepts -g... yes >> >> checking for gcc option to accept ANSI C... none needed >> >> checking for g++... no >> >> checking for c++... no >> >> checking for gpp... no >> >> checking for aCC... no >> >> checking for CC... no >> >> checking for cxx... no >> >> checking for cc++... no >> >> checking for cl... no >> >> checking for FCC... no >> >> checking for KCC... no >> >> checking for RCC... no >> >> checking for xlC_r... no >> >> checking for xlC... no >> >> checking whether we are using the GNU C++ compiler... no >> >> checking whether g++ accepts -g... no >> >> checking for a BSD-compatible install... /usr/bin/install -c >> >> checking for ranlib... ranlib >> >> checking for ar... /usr/bin/ar >> >> checking for cp... /bin/cp >> >> checking for ln... /bin/ln >> >> checking for mkdir... /bin/mkdir >> >> checking for nroff... /usr/bin/nroff >> >> checking for rm... /bin/rm >> >> checking for strdup... yes >> >> checking for vsnprintf... yes >> >> configure: creating ./config.status >> >> config.status: creating Makefile >> >> config.status: creating mxml.list >> >> config.status: creating mxml.pc >> >> config.status: creating config.h >> >> configure: Menuselect build configuration successfully completed >> >> make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' >> >> make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect' >> >> make[2]: Entering directory `/usr/src/astsrc/zaptel/menuselect' >> >> gcc -g -c -D_GNU_SOURCE -Wall -c -o menuselect.o menuselect.c >> >> gcc -g -c -D_GNU_SOURCE -Wall -c -o strcompat.o strcompat.c >> >> gcc -g -c -D_GNU_SOURCE -Wall -c -o menuselect_stub.o menuselect_stub.c >> >> make[3]: Entering directory `/usr/src/astsrc/zaptel/menuselect/mxml' >> >> gcc -O -Wall -c mxml-attr.c >> >> gcc -O -Wall -c mxml-entity.c >> >> gcc -O -Wall -c mxml-file.c >> >> gcc -O -Wall -c mxml-index.c >> >> gcc -O -Wall -c mxml-node.c >> >> gcc -O -Wall -c mxml-search.c >> >> gcc -O -Wall -c mxml-set.c >> >> gcc -O -Wall -c mxml-private.c >> >> gcc -O -Wall -c mxml-string.c >> >> /bin/rm -f libmxml.a >> >> /usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o >> >> a - mxml-attr.o >> >> a - mxml-entity.o >> >> a - mxml-file.o >> >> a - mxml-index.o >> >> a - mxml-node.o >> >> a - mxml-search.o >> >> a - mxml-set.o >> >> a - mxml-private.o >> >> a - mxml-string.o >> >> ranlib libmxml.a >> >> make[3]: Leaving directory `/usr/src/astsrc/zaptel/menuselect/mxml' >> >> gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o mxml/libmxml.a mxml/libmxml.a >> >> make[2]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' >> >> make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' >> >> Generating input for menuselect ... >> >> >> >> *********************************************************** >> >> The existing menuselect.makeopts file did not specify >> >> that 'zttool' should not be included. However, either some >> >> dependencies for this module were not found or a >> >> conflict exists. >> >> >> >> Either run 'make menuselect' or remove the existing >> >> menuselect.makeopts file to resolve this issue. >> >> *********************************************************** >> >> >> >> make: *** [menuselect.makeopts] Error 255 >> >> Failure: Unable to compile Zaptel 2 >> >> Fatal error: Unable to install Asterisk! >> >> [root@node rc.d]# >> >> >> >> I dont know where to go from there.. >> >> >> >> Anyone care to help a bit? >> >> >> >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

5 9

update-another (legitimate) question
by Greg 11 Sep '14

11 Sep '14

Actually, it's not quite right yet.. it still shows odd values for power and height. Maybe someone can check on this and see if they see what I am seeing.. Well oh well.. now it is fine!! Maybe a bug in my browser?? Strange because all the other nodes in the list were fine. I looked up my node on the Echolink link status page and see that the frequency and tone and ant height etc is all garbled with the missing variables in the comments field. I did a search near the Los Angeles area and noticed others the same (that have it coupled with Allstar). Maybe this hasn't been noticed yet.. I almost never look up my node there but was checking since I moved my location. Greg

1 0

update-another (legitimate) question
by Greg 11 Sep '14

11 Sep '14

Well oh well.. now it is fine!! Maybe a bug in my browser?? Strange because all the other nodes in the list were fine. I looked up my node on the Echolink link status page and see that the frequency and tone and ant height etc is all garbled with the missing variables in the comments field. I did a search near the Los Angeles area and noticed others the same (that have it coupled with Allstar). Maybe this hasn't been noticed yet.. I almost never look up my node there but was checking since I moved my location. Greg

1 0

another (legitimate) question
by Greg 11 Sep '14

11 Sep '14

I looked up my node on the Echolink link status page and see that the frequency and tone and ant height etc is all garbled with the missing variables in the comments field. I did a search near the Los Angeles area and noticed others the same (that have it coupled with Allstar). Maybe this hasn't been noticed yet.. I almost never look up my node there but was checking since I moved my location. Greg

1 0

update-change location name
by Greg 11 Sep '14

11 Sep '14

Never mind.. I was blind! Hi, I can't seem to find any place to change the name of my location that appears in the public node list or description of my node. If it is local to my server, which file is modified? Thanks Greg

1 0

change location name
by Greg 11 Sep '14

11 Sep '14

Hi, I can't seem to find any place to change the name of my location that appears in the public node list or description of my node. If it is local to my server, which file is modified? Thanks Greg

1 0

semi-free to good home
by Bryan D. Boyle 11 Sep '14

11 Sep '14

pick up ONLY near trenton nj at QRZ QTH: Not playing shipping clerk. 1 MSF5000 900 MHz 150 watt digital station. E-Z adaptation to allstar, literally 4 wires. Have one on air and it's rock steady and working; haven't touched it in months. RSS programmable. needs tuning, but if you have experience with these, and access to a test panel and service monitor, it's a cinch. From the PSE&G cache. $100. 1 MSR2000 440 analog repeater. 60w. Rocked for 444.9875 +5 needs tuning. With test panel, $75. 'working when removed' 1 GM300 VHF mobile, 45w. Tuned per spec, w/DTMF mic, works fine down to 144. $50 1 GM300-based 45w (turned down to 30w) 2m repeater setup w/URI. was on air till CPU went tango uniform. $150 1 Phelps-Dodge 144MHZ 6-can duplexer. The big one. Interconnect cables need re-doing (they were RG-8 from the factory, in the days when rcvrs weren't sensitive, it didn't matter), and cans need retuning. $400. 1 never used RTCM. $200. Box of Spectra A4 heads free. If no one wants the stuff, i'm sure the metal recycler will pick up from curb. Don't have time or inclination to futz with this stuff, and need to start thinning out the herd and cleaning out the homestead. -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message.

2 1

Re: [App_rpt-users] XIPAR Dialing an extension from Repeater to IP phone failing....
by mike＠midnighteng.com 10 Sep '14

10 Sep '14

1 0