March 2015 - App_rpt-users - lists.keekles.org

Registration issues
by Thor Wiegman 30 Nov '15

30 Nov '15

Tonight I had a user tell me that one of my nodes wouldn't connect anywhere. Verified, rebooted the server, still nothing. Tried running the rc.updatenodelist script manually and it just sits there. However, after running the following command I do get an update and can now connect to other nodes. /usr/bin/wget -O /var/lib/asterisk/rpt_extnodeshttp://nodes1.allstarlink.org/cgi-bin/nodes.pl When I checked two other nodes they had the same problem and same work-around. I ran that same command for nodes2 and it works. When I run it for nodes3 it times out. Could a problem with nodes3.allstarlink.org be causing the rc.updatenodelist script to choke? And could that have been causing my nodes to not be able to connect to others?

5 5

AllStar Asterisk on Raspberry Pi 1 and 2 UPDATED
by Steve Zingman 29 May '15

29 May '15

Correction: Updated links below I've updated the scripts and tar files for installing AllStar Asterisk on the Raspberry Pi platforms. The Pi 1 is at <https://github.com/N4IRS/AllStar/raw/master/rpi1.tar> The Pi 2 is at <https://github.com/N4IRS/AllStar/raw/master/rpi2.tar> All of the scripts, patches and platform specific files are at: <https://github.com/N4IRS/AllStar> 73, Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

3 2

*Please Reply* Are the O'l Digium FXS or FXO pci cards Supported?
by Steve Gladden 01 Apr '15

01 Apr '15

Or will they work? I remember reading they worked on old versions of apt_rpt I also figure they may be a better option than USB but relatively rare/expensive. I was just given a bag of them and was wondering if they'd be useful on Acid and what's going on now. Thanks! Steve Gladden Michigan Broadband Systems Connecting Your Business! [cid:image001.png@01D036C8.30B39920] +1 734.527.7150 Direct +1 248.327.4389 Fax steve(a)michiganbroadband.com<mailto:steve@michiganbroadband.com> www.michiganbroadband.com<http://www.michiganbroadband.com/>

2 2

Unable to configure my node on the allstarlinh.org website
by wa5ebp＠gmail.com 01 Apr '15

01 Apr '15

Hello, Past the first screen all of the spaces were grayed out and would not let me configure my node. What am I doing incorrectly. Thank you in advance. George A. Williams wa5ebp Sent from Windows Mail

5 6

Web Transceiver Does Not Work On My Node
by John E. Ryan 31 Mar '15

31 Mar '15

2 1

Re: [App_rpt-users] DTMF Detect
by kk6ecm 30 Mar '15

30 Mar '15

Remedied Thanks, Bob kk6ecm -----Original Message----- From: kk6ecm [mailto:kk6ecm@gmail.com] Sent: Sunday, March 29, 2015 11:56 AM To: 'app_rpt mailing list' Subject: DTMF Detect When I send a function command via iaxrpt to my node, it responds appropriately, but when I key in *5<macro#> from my radio (tried on HT and mobile), the node does not respond. It worked before I updated the computer hardware, same rpt.conf, and I believe the repeater hardware is the same configuration. 5=macro,1 ;in the [functions] list Thanks, Bob kk6ecm

2 2

Use of ntpd in ACID
by kk6ecm 30 Mar '15

30 Mar '15

I'm interested in using ntpd to keep my ACID server sync'd with date and time, and notice it is off, as configured from the CD. I set "chkconfig ntpd on, but wonder what servers I should use in ntp.conf. Also, has anyone used it and had any difficulties? thanks, Bob kk6ecm

5 6

Squelch Tail Elimination
by R. Wayne 29 Mar '15

29 Mar '15

After relocating our MSF 5000 to a new location and adjusting the squelch as low as we could reliably go we noticed that we have a squelch tail. Our coordination requires that we don’t. It appears that the MSF has a fixed squelch tail elimination method an no control other than cranking up the squelch again. This is surprising since we use PL encode / decode. I would think that the PL would mute as soon as the user unkeys. With this said is there anything in Allstar that would help with this situation? Wayne

5 7

DTMF Detect
by kk6ecm 29 Mar '15

29 Mar '15

When I send a function command via iaxrpt to my node, it responds appropriately, but when I key in *5<macro#> from my radio (tried on HT and mobile), the node does not respond. It worked before I updated the computer hardware, same rpt.conf, and I believe the repeater hardware is the same configuration. 5=macro,1 ;in the [functions] list Thanks, Bob kk6ecm

1 0

Re: [App_rpt-users] Squelch Tail Elimination
by Bryan Fields 29 Mar '15

29 Mar '15

I believe he's using the RTCM, so the usbradio commands will not work. On March 29, 2015 12:33:30 PM EDT, Ken <ke2n(a)cs.com> wrote: >There are two squelch tails. One in the user’s receiver which can be >eliminated by using tone squelch and turning off the PL some time >before dropping the carrier. Some commercial rigs respond to the >reverse phase tone burst. That is unusual in amateur rigs I think. And >some amateur rigs require the tone to be turned off longer that the >app_rpt default. This all has to do with the squelch tail being >generated in the user’s receiver. > > > >But if you want the *repeater* not to transmit a squelch tail - from >its own receiver - then you need: > > Rxsquelchdelay in usbradio.con > >as previously discussed in : > ><http://ohnosec.org/pipermail/app_rpt-users/2014-April/009175.html> >http://ohnosec.org/pipermail/app_rpt-users/2014-April/009175.html > > > >for example > >rxsquelchdelay=50 ; delayline in ms, carrier squelch tail eliminator > > > >this requires use of the usbradio channel driver. > > > >73 > >Ken > > > > > > > >From: R. Wayne [mailto:allstar@controlservers.net] >Sent: Sunday, March 29, 2015 1:34 AM >To: app_rpt-users(a)ohnosec.org >Subject: [App_rpt-users] Squelch Tail Elimination > > > >After relocating our MSF 5000 to a new location and adjusting the >squelch as low as we could reliably go we noticed that we have a >squelch tail. Our coordination requires that we don’t. It appears that >the MSF has a fixed squelch tail elimination method an no control other >than cranking up the squelch again. This is surprising since we use PL >encode / decode. I would think that the PL would mute as soon as the >user unkeys. > > > >With this said is there anything in Allstar that would help with this >situation? > > > >Wayne > > > >------------------------------------------------------------------------ > >_______________________________________________ >App_rpt-users mailing list >App_rpt-users(a)ohnosec.org >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >To unsubscribe from this list please visit >http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >down to the bottom of the page. Enter your email address and press the >"Unsubscribe or edit options button" >You do not need a password to unsubscribe, you can do it via email >confirmation. If you have trouble unsubscribing, please send a message >to the list detailing the problem. -- Bryan Fields 727-409-1194 http://bryanfields.net

2 1