March 2015 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Periodic plea for help
by Robert Newberry 12 Mar '15

12 Mar '15

My remote node connection is just over the internet. I use a start up macro. The connection at the offending node is a static IP on a business class cable modem. The remote node is also a cable modem but not a static IP. I checked this morning and the IP has not changed. Zoiper is being run on a windows 7 laptop 24/7. It has run fine for many months. Starting about a month ago it is dropping every evening. The zoiper program says "normal call clearing" I am supposed to get an email from my node with connect/disconnect notices. I've noticed I do not get a disconnect notice from the remote node or zoiper. Although if I manually hang the call up I will get one or if I disconnect the node. It is as if my node is shutting down all remote connections nightly, but I'm not sure why or where to look. On Mar 12, 2015 12:47 PM, "Technology Frontier | TF.OPS2" <tf.ops2(a)gmail.com> wrote: > From the little bit of information that is available it sounds like your > Internet connection is resetting in the overnight hours. Need to gather > some more information: > > > > > What type of connection do you have to the remote node? > > > Is the connection to the remote node using a static (permanent) or dynamic > IP address? > > > Are you running Zoiper on a Linux or Windows computer (or evens a "smart" > appliance -- aka smart phone)? > > > Mars - N0PCO > > > > > > > > > > On 03/12/2015 10:00 AM, Robert Newberry wrote: > > I seem to be having a problem with my iax connection I keep open 24/7 every > morning the PC I keep zoiper open full time is disconnected it says "normal > call clearing". I just recently setup a permanent connection from a remote > node to this node that I run zoiper on full time. The connection seems to > be disconnecting as well in the wee hours. I usually ssh into my remote > node and issue astres.sh and the connection automatically comes back. > > Is there anyone here who can help me determine why my node is doing this? > I've only been at this for a year I've gotten better but this problem > appears over my head. > > Thank you > Bob/N1XBM > > > > _______________________________________________ > App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > >

1 0

Node info
by Robert Newberry 12 Mar '15

12 Mar '15

I use one of K0KN's scripts for email status. I noticed some nodes have a little information like city, state and freq. What .conf file would that information be located so I could have that too? I noticed my nodes just show a node # and that's it. Thank you Bob/N1XBM

1 0

Show IP address
by Robert Newberry 12 Mar '15

12 Mar '15

I wrote it down a while back but now have lost my notes. I've tried google and I must be using the wrong terms. Is there a way to show the IP addresses of the nodes connected to my node? I thought it could be done from the CLI? Thank you

4 5

turing off repeater
by jumping_jackass＠yahoo.com 12 Mar '15

12 Mar '15

I found only one code (92) to turn off an allstar repeater and it seems to do so by disabling the reciever. Unfortunatly now i can not turn it back on because the reciever is "DISABLED". Have i just found the wrong code or am i missing something here? Pursuant to U.S. Code, title 47, Chapter 5, Sub-chapter II, ß227, "Any and all non-solicited commercial E-mail sent to this address is subject to a download and archival fee of $500.00 U.S.". E-mailing denotes acceptance of these terms.

3 2

Alinco DR-235
by Geoff 12 Mar '15

12 Mar '15

A couple of questions for the consortium 1) Has anyone here succcessfully interfaced a URI to an Alinco DR135/235/435 radio using the DB-9 jack on the back? 2) Ass/u/me'ing the 9600 baud line is actually discriminator audio (is it?) then the DSP function of channel driver usbradio should be adequate for PL detection. Is it? 3) In regards to a Beagle Bone Black, has there been any more progress towards DSP operations? (I already know what Doug is going to say - has anyone made it work?) AdvThanks!ance for any assistance. -Geoff/W5OMR 29655

2 1

Re: [App_rpt-users] Show IP address
by Robert Newberry 11 Mar '15

11 Mar '15

Thank you everybody. That allmon is something I need to look into.

2 1

Node 2514
by k5tra 10 Mar '15

10 Mar '15

We had the same problem with 2514 on the 900 MHz network. A rule in the IP table now blocks it. Tom / K5TRA

1 0

Node 2514
by Joe Wigal 10 Mar '15

10 Mar '15

Whats up with node 2514 and all the connections? It has timed my node out with constant connection and disconnects? de Joe/ W8JTW

1 0

Xenserver connect usb to vm
by Don Russell 08 Mar '15

08 Mar '15

Anyone have experience in running acid under Xen give me a shout offline. Currently running a couple Linux OS's under my xenserver just fine. I'm Working on trying to get acid to work too. The magic will be connecting the hardware usb to the vm. There's a couple ways to skin that cat. Wondering if it's been done before. 73 Don W9DRR

1 1

DSP on a separate BBB
by Eric Guth 08 Mar '15

08 Mar '15

Has anyone made a standalone CTCSS decoder that runs on the Raspberry pi or BBB? I want to decode multiple PL tones before feeding into my BBB node. IE I want DSP functionality even if I have to use two BBBs. I want one PL tone for repeat only while the other will allow connection to Allstar network. My radios do not have internal CTCSS. 73, Eric Guth 4Z1UG Node: 28422

1 0