March 2015 - App_rpt-users - lists.keekles.org

Traffic monitor
by Robert Newberry 23 Mar '15

23 Mar '15

I have a node that is running centos. I'd like to monitor how much data is being used by the ethernet port. Are there any tools already installed that I can leverage to do this? I see there is something called nload but I would need to enable an epel repository to do this. I'm trying to get an idea on average how much data I use in a month. Thank you

3 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 73, Issue 36
by Christopher Fuselier 23 Mar '15

23 Mar '15

Ok changed from speaker to flat. Now i have the other settings are renabled. Now when i use selection #9 it tells me Error: Rx voice gain adjust failed. Selection #2 it says Error: Rx input adjust failed #5 is set to 200 Selection #4 adjusted Now when audio comes in it cycles on and off while trying to talk especially when on the repeater. Any other ideas???? *Christopher W. Fuselier-- KF5NSA* *Vice President-- S.A.R.C.* *Sulphur Amateur Radio Club* *Cell: 337-842-6554* *KF5NSA(a)gmail.com* <KF5NSA(a)gmail.com> On Sun, Mar 22, 2015 at 11:00 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > > Today's Topics: > > 1. URI-X no rx set0ings (Christopher Fuselier) > 2. Re: allmon2 setup Login issues (Tim Sawyer) > 3. Re: URI-X no rx set0ings (Skyler F) > 4. Mifi (Robert Newberry) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 21 Mar 2015 21:58:40 -0500 > From: Christopher Fuselier <kf5nsa(a)gmail.com> > To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] URI-X no rx set0ings > Message-ID: > < > CAF99joK2Z8FiyjvEzOKQ2k4eKPTCEyzkKRSi48x8bpYzKE-j1g(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Have a URI-X on my allstar node. When i run radio-tune-menu it gives me no > options to set the RX. i have been having a problem with the uri not > hearing any Rx... checked the radio and all is good. it used to give me > this option for the RX then it just stop all of a sudden and cant make it > come back. has great TX just RX problem,,,, REALLY NEED HELP ON THIS > PROBLEM... . ....... > > > > > > > > *Christopher W. Fuselier-- KF5NSA* > *Vice President-- SARC* > *Cell: 337-842-6554 <337-842-6554>* > *KF5NSA(a)gmail.com* <KF5NSA(a)gmail.com> >

1 0

Re: [App_rpt-users] Allmon2 Multiple RTCMs on one server
by Herzog, Gary (ITC) 22 Mar '15

22 Mar '15

OK thanks much. :) From: Tim Sawyer [mailto:tim.sawyer@mac.com] Sent: Sunday, March 22, 2015 3:40 PM To: Herzog, Gary (ITC) Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Allmon2 Multiple RTCMs on one server It doesn’t show multiple RTCMs under one menu. I plan to add that but for now you have to... [Magnolia RTCM 1] node=510 [Magnolia RTCM 2] node=511 ...or some such. -- Tim :wq On Mar 22, 2015, at 1:23 PM, Herzog, Gary (ITC) <Gary.Herzog(a)itc.hctx.net<mailto:Gary.Herzog@itc.hctx.net>> wrote: I got Allmon2 going now I am trying to config the voter.ini.php file and I am having issues with getting multiple RTCMs to show up under one server. I tried [Magnolia] node=510,512 or [Magnolia] node=510 [Magnolia] node=512 what am I missing in my formatting? Thanks and good job the interface looks good and I like the added features.. Thanks Gary KC5DAQ _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Allmon2 Multiple RTCMs on one server
by Herzog, Gary (ITC) 22 Mar '15

22 Mar '15

I got Allmon2 going now I am trying to config the voter.ini.php file and I am having issues with getting multiple RTCMs to show up under one server. I tried [Magnolia] node=510,512 or [Magnolia] node=510 [Magnolia] node=512 what am I missing in my formatting? Thanks and good job the interface looks good and I like the added features.. Thanks Gary KC5DAQ

2 1

'any radio' to controller/URI interface
by Steven Donegan 22 Mar '15

22 Mar '15

Taking the youtube video posted by one of our group I have designed an interface between 'any' radio and a micro-node.com nano-node. The interface basically generates COS from VOX output of the radio - the radio will have to do the CTCSS bits itself. This, with a simple adapter cable should also work with a URI-X. Right now the bare board is designed and mostly laid out - the relay (see JP1-4 pins) isn't physically laid out as I am awaiting the DIP reed relay module to finish the physical layout. This should allow any radio to be used for repeater purposes. Please don't tell me about HT's not being up to the duty cycle :-) After I fab and test the boards I will make the 'final' versions available as Eagle schema/board files, as bare boards, or as kits - all components have been sourced via Jameco so I will add a BOM to the Eagle files ASAP after it works :-) Physical size looks like about 1 inch by 2.5 inch or less. Raw cost, via my fab, looks like <10$/PCB at the moment (final may be more like 7$ - trying to reduce area) - add the Jameco bits and I believe <20$ complete is possible. Feedback on the design is welcome :-) ____________ Steven Donegan KK6IVC FCC General Class License SSCC/NORC Life Member, Car #86 www.sscc.us

1 0

Re: [App_rpt-users] Mifi
by Robert Newberry 22 Mar '15

22 Mar '15

Ian, how do you find the RUT105 works? What carrier is it?

1 0

Mifi
by Robert Newberry 22 Mar '15

22 Mar '15

Does anyone have any experience with mifi units? I am looking at ways to get internet at remote sites. I was looking at some prepaid units but what I've seen the data you buy is only good for 60-90 days. I'd prefer something like a year or no expiration. I've also read they can be a bear with setting up a port forward. Ideally I'd want to have the allstar and ssh ports opened up. I have also not explored adding a mifi to my current cellular plan. To add to this does anyone have any idea for a test how I could measure bandwidth on one of my nodes for 30 days so I can get a real idea of how much bandwidth we would need to actually purchase. Thank you Bob/N1XBM

2 1

URI-X no rx set0ings
by Christopher Fuselier 22 Mar '15

22 Mar '15

Have a URI-X on my allstar node. When i run radio-tune-menu it gives me no options to set the RX. i have been having a problem with the uri not hearing any Rx... checked the radio and all is good. it used to give me this option for the RX then it just stop all of a sudden and cant make it come back. has great TX just RX problem,,,, REALLY NEED HELP ON THIS PROBLEM... . ....... *Christopher W. Fuselier-- KF5NSA* *Vice President-- SARC* *Cell: 337-842-6554 <337-842-6554>* *KF5NSA(a)gmail.com* <KF5NSA(a)gmail.com>

2 1

allmon2 setup Login issues
by Loren Tedford 22 Mar '15

22 Mar '15

Hi everyone its Loren here again.. I am trying to setup Allmon2 well actually i think for the most part i have it setup other than i can not login into the thing I have done just about everything i could think of anyone have any suggestions and what is the proper way to setup the password side of things i have the .htpasswd file located in a different folder than allmon does that make a difference i did change the function line under login.php maybei have missed some thing but just need some random thoughts on what i could have done wrong any and all thoughts are appreciated Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://www.Ltcraft.net <http://www.ltcraft.net/> http://www.richlandcountycomputers.com http://kc9zhv.lorentedford.com http://newwavesucks.com

3 5

Re: [App_rpt-users] Multiple Repeaters Per Site
by R. Wayne 21 Mar '15

21 Mar '15

Thank you all for some fresh ideas. I too like the hub idea even though it means a Linux server at the repeater site. The problem with Linux at a repeater site is power outrages. I work for the hosting company that has allowed me to place our high powered hub in a rack (dual Intel processors, quad core, 16GB RAM, RAID [ to be replaced with SSD ]) with a 100MBit pipe. We will be able to handle a lot of connections. At the repeater site we need to make sure that we at least have a UPS installed that will give the site owners generator time to come online. Otherwise Linux sucks when it scrambles. It may take hours to do a FSCK. That means a trip to the site unless we add a KVM over IP device. $$$ all the way around. We have three repeater sites. We have three RC-210’s. I propose adding a RTCM on the 4th port of the RC-210 and then port 1 –> 2m port 2 –> 440 port 3 –> 900. Here’s the price breakdown: 1 PC: $300 3 URI’s: $297 1 APC SmartUPS UPS: $500 1 KVM/IP: $305 ==>> $1397 Compared to: 1 Arcom RC-210: $400 1 RTCM: $269 ==>> $669 The difference here besides the price is that each repeater cannot be individually linked via Allstar. But the RC-210 can allow all three repeaters to connect to one RTCM. From what Chris Kurtis tells us the RC-210 worked out fine. I’d love to read more ideas. Wayne @ Node 41660 From: Chris Curtis Sent: Saturday, March 21, 2015 9:26 AM To: 'R. Wayne' Subject: RE: [App_rpt-users] Multiple Repeaters Per Site I used a port on the 210 for IRLP and then later allstarlink. Works fine. You still need a sound fob in between the PC and the 210 though. The 210 treats the fob as a radio and the fob treats the 210 as a radio. 210 port àfobß PC No problem at all. Chris KB0WLF From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of R. Wayne Sent: Saturday, March 21, 2015 10:32 AM To: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Multiple Repeaters Per Site But what about using an external controller like a Arcom RC-210?

4 5