Hello, I have an Acid server running as a repeater with one node, I want to move that one node over to my Rasberry Pi, which files can I copy over to the Rasberry Pi system, my guess would be the voter file, rpt file and the Iax file.....????
Frank
Having some issues with connecting USB Fob/URI. I get a slow blinking
LED. Plugged in URI into another machine and worked fine.
Using a Gigabyte GA-H81N motherboard with the Intel G3220 3.0GHz LGA1150
processor. Has anyone had an issues with that board?
Sincerely,
boB - W5EVH
Also, check that the port it's on is set to 10/half. The RTCM is very unforgiving of network misconfiguration and does not do auto negotiation.
--
Bryan Fields, W9CR
(not a CCIE; too busy actually building networks)
On May 1, 2015 7:18:46 PM EDT, Chuck Henderson <rpt2(a)chuck.midlandsnetworking.com> wrote:
>I don't think that you said, but I will assume that you are using the
>Garmin GPS and that you have it located where it has a clear view of
>the
>sky and that you have it cabled correctly and with the correct
>settings, up
>to date firmware in the RTCM, etc... Most likely IMHO, you have a
>network
>problem on your Ethernet or your network between your RTCM and your
>computer. I have found that if there are lots of errors, collisions,
>re-transmissions and the such on the network, the RTCM just looses
>track of
>the GPS. Fix the network problem and the GPS will mysteriously start
>working great.
>Chuck Henderson, CCIE2285, WB9UUS
>
>
>On Fri, May 1, 2015 at 5:39 PM, Jeff Carrier <k0jsc.jeff(a)gmail.com>
>wrote:
>
>> Ok i've had pretty wide variation of replies. When I see GPS drop
>and
>> restore on the console it always indicates 10 satellites in view.
>I'm
>> assuming the RTCM is looking for 10.
>>
>> On Fri, May 1, 2015 at 3:06 PM, Mike Tubby <mike(a)tubby.org> wrote:
>>
>>>
>>> For a 2D fix you need a minimum of 3 satellites
>>> For a 3D fix you need a minimum of 4 satellites
>>>
>>> Beyond this "more is better".
>>>
>>> HTH
>>>
>>> Mike G8TIC
>>>
>>>
>>> On 01/05/2015 20:41, Jeff Carrier wrote:
>>>
>>> Does anyone know how many satellites are required for a good GPS
>lock. I
>>> keep losing lock which is causing me to lose the system.
>>>
>>>
>>> K0JSC
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing
>listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users(a)ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press
>the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a
>message to
>>> the list detailing the problem.
>>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users(a)ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down
>> to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>message to
>> the list detailing the problem.
>>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users(a)ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
