May 2015 - App_rpt-users - lists.keekles.org

AllStar nets
by Skyler F 19 May '15

19 May '15

I have an AllStar node on a repeater clubs repeater. There isn't much traffic, and they think it is too much of a private repeater where I just use it. To promote use of the AllStar repeater, they have requested I air a variety of nets. What nets that have AllStar link do you guys recommend? So far, all I have is my net on Thursday at 7:00 PM MST and the Astronomy net at 7:00 PM MST. By the way, if anybody wants to link to my amateur satellite net on Thursday, its node 40764. If there isn't one, there should be an AllStar net. Thanks for suggestions Skyler KDØWHB

2 1

Voting
by Robert Newberry 19 May '15

19 May '15

I have a mild interest in voting. Seems like the RTCM are the way to go. Can anyone give me a brief over view? What I specifically want to know if my main site where the transmitter resides currently runs on a Acid box, do I need to run a RTCM there as well? Or do I only need them at my RX sites. Thank you N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812

5 5

DMK URiX interface loss of connectivity
by Steve Liggett 18 May '15

18 May '15

Did you upgrade to the latest BBB version? steve W3RX 28325 On May 18, 2015, at 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > DMK URiX interface loss of connectivity

1 0

Re: [App_rpt-users] good morning , DMK URiX interface loss of, connectivity
by Steve Zingman 18 May '15

18 May '15

Mike, I can't speak to the version of Linux and Asterisk you are running on the BBB if it is from hamvoip.org. On the BBBs I run I use Debian Wheezy now, moving to Jessie soon. If you continue to have problems you may want to try Debian. 73, Steve N4IRS On 5/18/2015 12:00 PM, app_rpt-users-request(a)ohnosec.org wrote: > > Message: 1 > Date: Mon, 18 May 2015 11:22:44 -0400 > From: Mike Lussier <mike.lussier(a)gmail.com> > To: ALL STAR <app_rpt-users(a)ohnosec.org> > Subject: [App_rpt-users] good morning , DMK URiX interface loss of > connectivity > Message-ID: > <CAJ_8STkmLw8a7ntWwE6xU8Fv+sD0bSzczu+hoEZLxWx=T_-QNg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have havd several all star nodes up and running using the DMK URIx > interfaces each connected to thier own BeagleBone Black. Normally I see the > green light on the URIx blinking at me. In the past few months I have seen > where the light stops blinking. some times pulling the USB for 10 seconds > and plugging it back in solves the problem. worse case a full reboot of the > system. . now its only getting worse instead of better. and almost daily > issue. I thought about the watchdog idea. but it monitors the read write to > a file if I remember correctly. is it possible to rewrite the watchdog to > monitor the pulses of the URI instead and act on the loss of pulses from > the URI > > > Mike AE4ML -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 75, Issue 37
by Jim Korenz 18 May '15

18 May '15

One thing you could try is to setup a cron job to reboot the system. Say at 4 AM do "shutdown -r now". I was having problems with the BBB and ver1.0 software with the USB dongle hanging up. This fixed it for the most part. Down from every other day to maybe once a month. JimK N8PXW -------------------------------------------- On Mon, 5/18/15, app_rpt-users-request(a)ohnosec.org <app_rpt-users-request(a)ohnosec.org> wrote: Subject: App_rpt-users Digest, Vol 75, Issue 37 To: app_rpt-users(a)ohnosec.org Date: Monday, May 18, 2015, 12:00 PM Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. good morning , DMK URiX interface loss of connectivity (Mike Lussier) ---------------------------------------------------------------------- Message: 1 Date: Mon, 18 May 2015 11:22:44 -0400 From: Mike Lussier <mike.lussier(a)gmail.com> To: ALL STAR <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] good morning , DMK URiX interface loss of connectivity Message-ID: <CAJ_8STkmLw8a7ntWwE6xU8Fv+sD0bSzczu+hoEZLxWx=T_-QNg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have havd several all star nodes up and running using the DMK URIx interfaces each connected to thier own BeagleBone Black. Normally I see the green light on the URIx blinking at me. In the past few months I have seen where the light stops blinking. some times pulling the USB for 10 seconds and plugging it back in solves the problem. worse case a full reboot of the system. . now its only getting worse instead of better. and almost daily issue. I thought about the watchdog idea. but it monitors the read write to a file if I remember correctly. is it possible to rewrite the watchdog to monitor the pulses of the URI instead and act on the loss of pulses from the URI Mike AE4ML -- *"We must reject the idea that every time a law is broken, society is guilty rather than the law breaker.It is time to restore the American precept that each individual is accountable for his actions." ~ Ronald Regan*

1 0

ACID/URIx to CDM1250
by Apu 18 May '15

18 May '15

I'm trying to interface a Motorola CDM1250 to a Linux (ACID) server using a URIx and the pinout listed for the GM300 on the DMK website. I am successfully triggering the PTT and transmitting audio, but I am not receiving any audio to a SIP softphone connected to the node. I see similar posts about this problem in the list archives from years ago but none of those solutions seems to be making a difference for me. Any thoughts? Thanks in advance, -- Apu <apu(a)spfld.com>

2 3

link ,15 ?
by jimmy keffer 17 May '15

17 May '15

is their a way i can set my node that when i link,15 2 get all nodes connected that the output os only played over my local node so other nodes don't need to hear 15 mins of node numbers? jimmy ka3vgm

2 3

Announce system wide status only local?
by Skyler F 17 May '15

17 May '15

Is there a way to announce the system wide status only local so it does not play on others repeaters with telemetry enabled? Skyler KDØWHB -- Skyler Fennell amsatnet.info KDØWHB electricity440(a)gmail.com

3 2

Anyone using an Intel Compute Stick?
by Mickey Baker 16 May '15

16 May '15

It looks interesting for this type application. -- Mickey Baker, N4MB Fort Lauderdale, FL *“Tell me, and I will listen. Show me, and I will understand. Involve me, and I will learn.” *Teton Lakota, American Indian Saying.

1 0

Re: [App_rpt-users] High pitch audio
by pete M 15 May '15

15 May '15

yup I did in early test, and it did not seam to fix it.. Now I did change it and relaoded the settings un the asterisk cli and it did made a BIG change.. strange.. did I forgot to reload the first time? maybe.. thanks again for the help From: wb3awj(a)comcast.net To: petem001(a)hotmail.com Subject: Re: [App_rpt-users] High pitch audio Date: Fri, 15 May 2015 03:22:50 +0300 Did you try txlimonly=yes ? -- Bob Poff Loganville, Pa Thursday, 14 May 2015, 06:37PM -04:00 from pete M <petem001(a)hotmail.com>: Got 2 repeater linked together at the same site One msf5000 UHF one tkr750 VHF If I listen to the UHF repeater the audio is nice and have low and high sound (in the limit of 3hz of course) No mather if the receiving repeater is the VHF or UHF. I even asked a friend to switch from VHF to UHF on his radio and I could not detect wich was the source beside from the courtasy tone and the end if his TX. But on the VHF side the audio is High pitch no bass.. here is my config in usbsound.conf for the TKR750 [usb28739] ; VHF hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=103.5 rxctcssfreqs=103.5 txctcssfreqs=103.5 ;rxctcssoverride=0 carrierfrom=usbinvert ctcssfrom=dsp rxdemod=flat txprelim=no txlimonly=no txtoctype=notone txmixa=voice txmixb=tone invertptt=0 duplex=1 rxondelay=1 rxnoisefiltype=0 eeprom=0 Is there a something obvious that I miss? Thanks.. Pierre _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0