March 2016 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] URI active low?
by Steve 02 Mar '16

02 Mar '16

Being pulled low enough is kind of what I was thinking and wondering if others have had that issue. Its really the only thing that makes any sense to me in terms of what I am experiencing. A little digging shows this solution, which I will try this weekend once I dig out my parts. http://dmkeng.com/images/HIGH_CURRENT_PTT.pdf >I seem to recall some people having issues with the PTT output not being >pulled low enough, you might try searching the list archives for a similar >situation. I recall several fixes from adding a reed relay, inserting a >diode in line, or using a transistor buffer, might have been a jfet. > >Steve

2 1

URI active low?
by Steve 01 Mar '16

01 Mar '16

I am having some problems getting PTT action on a repeater I am converting from IRLP to Allstar. The DMK-URI is interfaced to the secondary port of a CAT-1000 controller. And the controllers second port is configured as active low. There is a 10k pull-up resistor on the CAT controller's COR#2 line. URI DMK-URI CAT-1000 CAT-1000 Pin 1 PTT Pin 5 COR #2 Pin 7 CTCSS DET Pin 9 PTT #2 Pin 8 COR DET Pin 20 GND Pin 17 GND Pin 21 MIC IN AC Pin 23 TX AUDIO #2 Pin 22 LEFT OUT Pin 12 Rx AUDIO #2 And I am using these settings: eeprom=0 hdwtype=0 rxboost=0 carrierfrom=usbinvert ctcssfrom=no txmixa=voice txmixb=no invertptt=0 duplex=1 plfilter=no deemphasis=no preemphasis=no rxaudiodelay=0 Running asterisk -r shows that its supposed to be playing the time (etc), but it never keys. Suggestions welcome. Thanks

4 3

RxCTCSSfreqs / EchoLink
by Steve Mahler 01 Mar '16

01 Mar '16

Does anyone have information on ... 1) In rpt.conf, setting variable rxctcssfreqs, where is the table of valid RX tones? 2) In rpt.conf, setting variables [tr]xctcssfreqs, is there a limit to the number of tones added to the list? 3) Can the EchoLink section be configured to say ... W9YB Connected ... but NOT say ... to node 41111? ...STeve KF5VH

4 4

I think we slightly touched on this topic but need a refresher
by Loren Tedford 01 Mar '16

01 Mar '16

I am playing around with iaxrpt and have added the following lines to my extensions.conf [globals] HOMENPA=200 NODE=41715 NODE2=41834 NODE3=27103 NODE4=42448 [iax-client] ; for IAX VIOP clients exten => ${NODE},1,Ringing exten => ${NODE},n,Wait(3) exten => ${NODE},n,Answer exten => ${NODE},n,Set(NODENUM=${CALLERID(number)}) exten => ${NODE},n,Playback(rpt/node|noanswer) exten => ${NODE},n,SayDigits(${EXTEN}) exten => ${NODE},n,Set(CALLERID(num)=0) exten => ${NODE},n,Rpt,${NODE}|P|${CALLERID(name)} exten => ${NODE},n,Hangup exten => ${NODE},n(hangit),Answer exten => ${NODE},n(hangit),Wait(1) exten => ${NODE},n(hangit),Hangup [iax-client2] ; for IAX VIOP clients exten => ${NODE2},1,Ringing exten => ${NODE2},n,Wait(3) exten => ${NODE2},n,Answer exten => ${NODE2},n,Set(NODENUM=${CALLERID(number)}) exten => ${NODE2},n,Playback(rpt/node|noanswer) exten => ${NODE2},n,SayDigits(${EXTEN}) exten => ${NODE2},n,Set(CALLERID(num)=0) exten => ${NODE2},n,Rpt,${NODE}|P|${CALLERID(name)} exten => ${NODE2},n,Hangup exten => ${NODE2},n(hangit),Answer exten => ${NODE2},n(hangit),Wait(1) exten => ${NODE2},n(hangit),Hangup [iax-client3] ; for IAX VIOP clients exten => ${NODE3},1,Ringing exten => ${NODE3},n,Wait(3) exten => ${NODE3},n,Answer exten => ${NODE3},n,Set(NODENUM=${CALLERID(number)}) exten => ${NODE3},n,Playback(rpt/node|noanswer) exten => ${NODE3},n,SayDigits(${EXTEN}) exten => ${NODE3},n,Set(CALLERID(num)=0) exten => ${NODE3},n,Rpt,${NODE}|P|${CALLERID(name)} exten => ${NODE3},n,Hangup exten => ${NODE3},n(hangit),Answer exten => ${NODE3},n(hangit),Wait(1) exten => ${NODE3},n(hangit),Hangup [iax-client4] ; for IAX VIOP clients exten => ${NODE4},1,Ringing exten => ${NODE4},n,Wait(3) exten => ${NODE4},n,Answer exten => ${NODE4},n,Set(NODENUM=${CALLERID(number)}) exten => ${NODE4},n,Playback(rpt/node|noanswer) exten => ${NODE4},n,SayDigits(${EXTEN}) exten => ${NODE4},n,Set(CALLERID(num)=0) exten => ${NODE4},n,Rpt,${NODE}|P|${CALLERID(name)} exten => ${NODE4},n,Hangup exten => ${NODE4},n(hangit),Answer exten => ${NODE4},n(hangit),Wait(1) exten => ${NODE4},n(hangit),Hangup I added the following lines to my iax.conf [username] ; Connect from iax client (Zoiper...) type=friend ; Notice type here is friend <-------------- context=iax-client ; Context to jump to in extensions.conf auth=md5 secret=password host=dynamic disallow=all allow=ulaw allow=g726aal2 allow=gsm transfer=no [username2] ; Connect from iax client (Zoiper...) type=friend ; Notice type here is friend <-------------- context=iax-client2 ; Context to jump to in extensions.conf auth=md5 secret=password host=dynamic disallow=all allow=ulaw allow=g726aal2 allow=gsm transfer=no [username3] ; Connect from iax client (Zoiper...) type=friend ; Notice type here is friend <-------------- context=iax-client3 ; Context to jump to in extensions.conf auth=md5 secret=password host=dynamic disallow=all allow=ulaw allow=g726aal2 allow=gsm transfer=no [username4] ; Connect from iax client (Zoiper...) type=friend ; Notice type here is friend <-------------- context=iax-client4 ; Context to jump to in extensions.conf auth=md5 secret=password host=dynamic disallow=all allow=ulaw allow=g726aal2 allow=gsm transfer=no I am trying to use the Andriod iax client and it only connects to node 41715 and to no other nodes why is this?? Loren Tedford (KC9ZHV) Email: lorentedford(a)gmail.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://www.newwavesucks.com http://forum.newwavesucks.com

2 5

New RPi-3 64bit
by mike＠midnighteng.com 01 Mar '16

01 Mar '16

Well, I thought this might intest some of you. RPi-3 in 64 bit http://vrworld.com/2016/03/01/raspberry-pi-3-goes-64-bit/

4 3

is the list dead or it is on my side?
by pete M 01 Mar '16

01 Mar '16

did not received a single mesaage since the 21... Sent from my iPad

1 0