July 2016 - App_rpt-users - lists.keekles.org

OT: internet threats
by Bryan D. Boyle 12 Jul '16

12 Jul '16

If you think we're not immune, think again. ANYTHING connected to the net, whether an email server in your basement ( :) ) or a repeater controller connected to the net in a datacenter is a target. If the big boys are scrambling, think of what we, with our limited resources, are faced with: https://threatpost.com/91-percent-of-public-facing-ics-components-are-remot… And for a realtime view of what's being sensed by the second largest web crawling organization (the former Internet Security Systems, now IBM X-Force): https://exchange.xforce.ibmcloud.com Awareness is a good thing. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.

1 0

Re: [App_rpt-users] Stepping on toes...
by Steve Zingman 11 Jul '16

11 Jul '16

So, As I said before, grab the source and run with it. On 7/11/2016 3:28 PM, Steve Wright wrote: > They sure do, and then people walk. > > Xippr has potential, in my book. The rest is just IRLP with better > audio. > > > On 12/07/16 07:25, Steve Zingman wrote: >> I can't speak to what happened a year ago, nor will I comment on the >> other list. I will say the list owner has the ability to ban, censor >> or moderate someone. I am not the list owner, just a guest. >> If you have any questions on how I feel about a presentation of >> ideas, see my previous posts. >> >> As I said, "The horse is dead" >> >> I'm done. > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

3 2

"no forums" demand
by Steve Wright 11 Jul '16

11 Jul '16

On 12/07/16 08:25, Bryan Fields <bryan(a)bryanfields.net> wrote: > > No forums please. I think github has plenty and if we need a mailing list I'm happy to setup another one. People will probably do as they see fit on the wild free internet. Now is probably not a good time to start saying "no" to anything at all. Steve

1 0

Re: [App_rpt-users] Xippr
by Steve Wright 11 Jul '16

11 Jul '16

On 12/07/16 07:58, Loren Tedford <lorentedford(a)gmail.com> wrote: > > Is Xippr still in business?? I got the software installed and running in a VM, and have access to the web admin interfaces on it. I don't have an audio interface running on it. Xippr is quite curious. A huge huge amount of work has gone into it, and many parts are quite polished. I must say, the install was a nightmare, mainly because the docs are a little strewn about the place - but it's all there. I want voting, ALSA audio with DSP, and alternate I/O (not hacked fob I/O) Why? 1.) 25 watts into a duplexer with a half wave dipole is a shit repeater. Even 250 watts into 6dBi is still a small-penis ham radio station if you ask me. I don't want to build a repeater like that. 2.) Outboard voting receivers with preamps and directional antennas, and no duplexer to get in the way suits me fine. 3.) Kilowatt-plus transmitters with no duplexing into big gain suits me fine. Steve

1 0

A and B audio output from USB fob on a RPi running DIAL
by Ramesh Dhami 11 Jul '16

11 Jul '16

Hi All: I am using the DIAL Image on a PRi 2; I would like to use the "A" and "B" audio outputs from my fob (A for voice and B for PL), so that I can inject them into separate points on my exciter. I was able to get 2 'discrete' audio outputs when running ACID on a PC. This doesn't seem to be working with the Pi / DIAL. Is anyone running this configuration on a Pi? Thx, Ramesh. # 27919 and a truck load of others! Sent from my iPhone

6 9

Re: [App_rpt-users] Stepping on toes...
by Steve Zingman 11 Jul '16

11 Jul '16

I can't speak to what happened a year ago, nor will I comment on the other list. I will say the list owner has the ability to ban, censor or moderate someone. I am not the list owner, just a guest. If you have any questions on how I feel about a presentation of ideas, see my previous posts. As I said, "The horse is dead" I'm done. On 7/11/2016 3:19 PM, Steve Wright wrote: > This and arm-allstar. I was banned here a year or more ago, I snuck > in with a new email. > > Censured on arm-allstar last week for a post in an IRLP discussion. > > > On 12/07/16 07:14, Steve Zingman wrote: >> On this list or others? >> >> On 7/11/2016 3:05 PM, Steve Wright wrote: >>> You might add to that enthusiasm and self-esteem, particularly after >>> the way we get spoken to on email lists. >>> >>> Twice now I have been banned or censured for topics otherwise >>> approved - on apt_rpt related lists alone. Why do developers think >>> members will get involved if they do that? >>> >>> >>> On 12/07/16 06:12, Steve Zingman <szingman(a)msgstor.com> wrote: >>>> Time, Energy, drive, people. Just to name a few. >>>> >>>> On 7/11/2016 2:08 PM, Loren Tedford wrote: >>>>> Ok so what are missing to get the development started on a more >>>>> current version of asterisk?? Lets face it 1.4.23 went out of >>>>> professional service back in like 2010... >>>>> >>>>> Just saying we really need to start thinking more about the future >>>>> now >>>>> rather than waiting till we have mass issues across the board.. >>>>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >>> down to the bottom of the page. Enter your email address and press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to the list detailing the problem. >> > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

1 0

Re: [App_rpt-users] Stepping on toes...
by Steve Wright 11 Jul '16

11 Jul '16

On 12/07/16 07:05, Steve Zingman <szingman(a)msgstor.com> wrote: > There have been discussion as to how to move forward. The people > involved are the people that will do the work. We can not be "left > behind" and the tools needed are available. app_rpt is Open Source, > Asterisk is Open Source. The concepts and methods used by app_rpt are > readily apparent. They can be re-created. > [...] > On 7/11/2016 2:33 PM, Loren Tedford wrote: >> I would love work on this project but its not just going to be me >> alone their needs to be others interested in it too... I'm a wireless ISP, and a ham radio constructor and I USE radios on the air every day. I'll help. Cue the list gods banning everyone in this discussion.... Here we go... S

1 0

Re: [App_rpt-users] Stepping on toes...
by Steve Wright 11 Jul '16

11 Jul '16

You might add to that enthusiasm and self-esteem, particularly after the way we get spoken to on email lists. Twice now I have been banned or censured for topics otherwise approved - on apt_rpt related lists alone. Why do developers think members will get involved if they do that? On 12/07/16 06:12, Steve Zingman <szingman(a)msgstor.com> wrote: > Time, Energy, drive, people. Just to name a few. > > On 7/11/2016 2:08 PM, Loren Tedford wrote: >> Ok so what are missing to get the development started on a more >> current version of asterisk?? Lets face it 1.4.23 went out of >> professional service back in like 2010... >> >> Just saying we really need to start thinking more about the future now >> rather than waiting till we have mass issues across the board.. >>

2 1

Re: [App_rpt-users] Stepping on toes...
by Steve Zingman 11 Jul '16

11 Jul '16

Well, I guess I'm old school, or just old. mail lists give me easy access to information. I don't need multiple programs open. I get it on my phone, tablet and multiple desktops. I've seen forum attempts in the past that have failed. ASL is Open Source. The way OS software evolves is when someone identifies a need and takes the initiative to act upon that need. I applaud you for seeing this need, now are you ready for the next step? Can you define the problem? The proposed solution in detail? The steps needed to get there? How it will be tested? This is a great idea, now run with it. Steve On 7/11/2016 2:18 PM, Loren Tedford wrote: > Steve any idea how far we have gotten?? The security threat list is > pretty large at the moment.. > https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html > > And honestly the above is probably for more current versions which > mean their are probably more threats out their than we really want to > think about.. > > All i know is we can't keep running on this version for ever well i > don't think we can.. I guess we may get to the point of apt pinning.. > > While i am being honest here.. We should probably one day update the > mailing list to more of a forum thread some where with actual details > etc.. Mailing list seems to be abit old school just my thoughts.. > > Loren Tedford (KC9ZHV) > Phone: > Fax: > Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> > Email: KC9ZHV(a)KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> > http://www.lorentedford.com <http://www.lorentedford.com/> > http://www.kc9zhv.com <http://www.kc9zhv.com/> > http://forum.kc9zhv.com <http://forum.kc9zhv.com/> > http://hub.kc9zhv.com <http://hub.kc9zhv.com/> > http://Ltcraft.net<http://ltcraft.net/> > > On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > Time, Energy, drive, people. Just to name a few. > > > On 7/11/2016 2:08 PM, Loren Tedford wrote: >> Ok so what are missing to get the development started on a more >> current version of asterisk?? Lets face it 1.4.23 went out of >> professional service back in like 2010... >> >> Just saying we really need to start thinking more about the >> future now rather than waiting till we have mass issues across >> the board.. >> >> Loren Tedford (KC9ZHV) >> Phone: >> Fax: >> Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> >> Email: KC9ZHV(a)KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com> >> http://www.lorentedford.com >> http://www.kc9zhv.com >> http://forum.kc9zhv.com >> http://hub.kc9zhv.com >> http://Ltcraft.net<http://ltcraft.net/> >> >> On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman >> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >> >> It's going to taker a LOT of work to change versions of >> Asterisk. That's not to say it will not happen. >> I can't re-create you crashes. >> I firewall my boxes to only allow access from trusted >> addresses for ssh. I use a VPN for roaming users. I don't >> support SIP. >> >> >> On 7/11/2016 2:02 PM, Loren Tedford wrote: >>> >>> I suppose while we are stepping on toes I want to ask about >>> the proper way of securing a dial box from our wonderful >>> hackers out their.. Been using ufw and fail2ban but found >>> out recently nothing is invincible.. any thoughts?? By the >>> way any progress on asterisk crashes?? I can't find a reason >>> for the crashes in the logs.. >>> >>> Also what is the status on updating asterisk to a more >>> current version?? Any issues with that?? >>> >>> Loren Tedford (KC9ZHV) >>> Email: lorentedford(a)gmail.com <mailto:lorentedford@gmail.com> >>> Phone: >>> Fax: >>> http://www.lorentedford.com >>> http://kc9zhv.com >>> >>> Sent from Droid Turbo from Verizon wireless network >>> >>> On Jul 11, 2016 12:34 PM, "Steve Zingman" >>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>> >>> Yes, >>> I've seen it before. Ramesh asked the question here and >>> a couple of us had some questions as to his >>> configuration. I think he is in process of gathering >>> info so we can trouble shoot more. >>> I't not hard to get lists confused. >>> >>> Steve >>> >>> On 7/11/2016 1:30 PM, DuaneVT . wrote: >>>> Thanks Steve. You have helped me several times here I >>>> believe. Perhaps it was the ARM Allstar list I should >>>> have ranted to. As some posts get shared between lists, >>>> it is hard not to end up on another list. >>>> Here is an example. I felt for the questioner... >>>> "Message: 3 >>>> Date: Sun, 10 Jul 2016 09:53:39 -0400 >>>> From: Doug Crompton <doug(a)crompton.com >>>> <mailto:doug@crompton.com>> >>>> To: ARM Allstar <arm-allstar(a)hamvoip.org >>>> <mailto:arm-allstar@hamvoip.org>> >>>> Subject: Re: [arm-allstar] Using "A" and "B" audio >>>> outputs using the >>>> DIAL Image on a RPi >>>> Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0(a)phx.gbl> >>>> Content-Type: text/plain; charset="iso-8859-1" >>>> >>>> Ramesh, >>>> >>>> This is NOT a dial list, ask elsewhere! It works fine >>>> on the hamvoip.org <http://hamvoip.org/> code. >>>> 73 Doug >>>> WA3DSP >>>> http://www.crompton.com/hamradio >>>> >>>> >>>> > To: arm-allstar(a)hamvoip.org >>>> <mailto:arm-allstar@hamvoip.org> >>>> > Date: Sun, 10 Jul 2016 07:34:57 -0400 >>>> > Subject: [arm-allstar] Using "A" and "B" audio outputs >>>> using the DIAL Image on a RPi >>>> > From: arm-allstar(a)hamvoip.org >>>> <mailto:arm-allstar@hamvoip.org> >>>> > CC: Ramesh(a)va3uv.com <mailto:Ramesh@va3uv.com> >>>> > >>>> > Hi All: >>>> > >>>> > I am using the DIAL Image on a PRi 2; I would like to >>>> use the "A" and >>>> > "B" audio outputs from my fob (A for voice and B for >>>> PL), so that I can >>>> > inject them into separate points on my exciter. >>>> > >>>> > I was able to get 2 'discrete' audio outputs when >>>> running ACID on a PC. >>>> > This doesn't seem to be working with the Pi / DIAL. >>>> Is anyone running >>>> > this configuration on a Pi? >>>> > >>>> > Thx, >>>> > >>>> > Ramesh. >>>> > >>>> > # 27919 and a truck load of others! >>>> " >>>> >>>> Sheesh, I want to help everyone.... >>>> Thanks again until my next question HERE, >>>> Duane >>>> >>>> On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman >>>> <szingman(a)msgstor.com <mailto:szingman@msgstor.com>> wrote: >>>> >>>> Duane, >>>> When were you told on the App_rpt-users list to go >>>> elsewhere with DIAL questions? DIAL is the official >>>> distribution for AllStar. Support questions SHOULD >>>> be posted here. I know that other lists limit their >>>> support to THEIR distribution and have curtly told >>>> DIAL users to go elsewhere for support. I do not >>>> remember seeing your question on here. If I missed >>>> it, I'm sorry. I TRY to help out with DIAL and >>>> general Asterisk questions when possible. >>>> >>>> 73, Steve N4IRS >>>> INAD >>>> >>>> On 7/11/2016 12:42 PM, DuaneVT . wrote: >>>>> I too have asked questions here concerning DIAL >>>>> and been told curtly to go elsewhere. As DIAL >>>>> distros have all the files included and interface >>>>> to the FOBs and SBCs, where do we draw the line? I >>>>> have followed all instructions for installing the >>>>> software and had fresh boot problems. It was hard >>>>> to tell where the problem was, but when I am new >>>>> to Linux/DIAL and the whole Allstar project, I >>>>> looked for guidance where I found discussions. >>>>> There is an Allstar Link community on Google+, and >>>>> you will see I have all except 1 postings! >>>>> Crickets......... >>>>> Perhaps the moderator/users here could post a list >>>>> of URLs for different aspects of AllStar Link so >>>>> us Newbies would know where to hang out. >>>>> I have had GREAT support from other listers here >>>>> by direct email after each post and I sincerely >>>>> thank all who have taken an interest in someone >>>>> who has to learn as we all do. >>>>> 73, >>>>> Duane KA1LM #42996 >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)ohnosec.org >>>>> <mailto:App_rpt-users@ohnosec.org> >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>> >>>> -- >>>> "Anything is possible if you don't know what you are talking about." >>>> 1st Law of Logic >>>> >>>> >>> >>> -- >>> "Anything is possible if you don't know what you are talking about." >>> 1st Law of Logic >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org <mailto:App_rpt-users@ohnosec.org> >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email >>> address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it >>> via email confirmation. If you have trouble >>> unsubscribing, please send a message to the list >>> detailing the problem. >>> >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

3 3

Re: [App_rpt-users] Stepping on toes...
by Loren Tedford 11 Jul '16

11 Jul '16

Well i am glad to see their is a project in the works I haven't heard any updates in a few months and was growing concerned I guess I will Loren Tedford (KC9ZHV) Phone:618-553-0806 Fax: 1-618-551-2755 Email: lorentedford(a)gmail.com Email: KC9ZHV(a)KC9ZHV.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://Ltcraft.net <http://ltcraft.net/> On Mon, Jul 11, 2016 at 1:40 PM, Steve Zingman <szingman(a)msgstor.com> wrote: > There have been discussion as to how to move forward. The people involved > are the people that will do the work. We can not be "left behind" and the > tools needed are available. app_rpt is Open Source, Asterisk is Open > Source. The concepts and methods used by app_rpt are readily apparent. They > can be re-created. > > I think we have beaten the horse to death. An I owned a horse, so no one > should take offense at as old adage. > > 73, Steve N4IRS > INAD > > > On 7/11/2016 2:33 PM, Loren Tedford wrote: > > Well i have a virtualized environment out in a data center environment > what better way of testing some thing that putting it right out their with > the rest of the stuff.. > > > Now where do we begin? I know absolutely nothing about coding however I do > know if we don't do some thing fast we will be left behind and the tools > others may have had available to port their stuff through may not be > available for us.. > > I would love work on this project but its not just going to be me alone > their needs to be others interested in it too... Now moving on how far are > we to where.. I read some thing awhile back where some one was working on a > new branch of asterisk not sure how big of a leap it was but it would be > nice to see us catching up with the more current version of asterisk with > in a couple of years.. > > If that project died then where do we start anyone?? > > > Loren Tedford (KC9ZHV) > Phone: > Fax: > Email: <lorentedford(a)gmail.com>lorentedford(a)gmail.com > Email: <KC9ZHV(a)KC9ZHV.com>KC9ZHV(a)KC9ZHV.com > <http://www.lorentedford.com/>http://www.lorentedford.com > <http://www.kc9zhv.com/>http://www.kc9zhv.com > <http://forum.kc9zhv.com/>http://forum.kc9zhv.com > <http://hub.kc9zhv.com/>http://hub.kc9zhv.com > http://Ltcraft.net <http://ltcraft.net/> > > On Mon, Jul 11, 2016 at 1:26 PM, Steve Zingman < <szingman(a)msgstor.com> > szingman(a)msgstor.com> wrote: > >> Well, >> I guess I'm old school, or just old. mail lists give me easy access to >> information. I don't need multiple programs open. I get it on my phone, >> tablet and multiple desktops. I've seen forum attempts in the past that >> have failed. >> >> ASL is Open Source. The way OS software evolves is when someone >> identifies a need and takes the initiative to act upon that need. I >> applaud you for seeing this need, now are you ready for the next step? Can >> you define the problem? The proposed solution in detail? The steps needed >> to get there? How it will be tested? This is a great idea, now run with >> it. >> >> Steve >> >> >> On 7/11/2016 2:18 PM, Loren Tedford wrote: >> >> Steve any idea how far we have gotten?? The security threat list is >> pretty large at the moment.. >> https://www.cvedetails.com/vulnerability-list/vendor_id-6284/Asterisk.html >> >> And honestly the above is probably for more current versions which mean >> their are probably more threats out their than we really want to think >> about.. >> >> All i know is we can't keep running on this version for ever well i don't >> think we can.. I guess we may get to the point of apt pinning.. >> >> While i am being honest here.. We should probably one day update the >> mailing list to more of a forum thread some where with actual details etc.. >> Mailing list seems to be abit old school just my thoughts.. >> >> Loren Tedford (KC9ZHV) >> Phone: >> Fax: >> Email: <lorentedford(a)gmail.com>lorentedford(a)gmail.com >> Email: <KC9ZHV(a)KC9ZHV.com>KC9ZHV(a)KC9ZHV.com >> <http://www.lorentedford.com>http://www.lorentedford.com >> <http://www.kc9zhv.com>http://www.kc9zhv.com >> <http://forum.kc9zhv.com>http://forum.kc9zhv.com >> <http://hub.kc9zhv.com>http://hub.kc9zhv.com >> <http://ltcraft.net/>http://Ltcraft.net >> >> On Mon, Jul 11, 2016 at 1:12 PM, Steve Zingman < <szingman(a)msgstor.com> >> szingman(a)msgstor.com> wrote: >> >>> Time, Energy, drive, people. Just to name a few. >>> >>> >>> On 7/11/2016 2:08 PM, Loren Tedford wrote: >>> >>> Ok so what are missing to get the development started on a more current >>> version of asterisk?? Lets face it 1.4.23 went out of professional service >>> back in like 2010... >>> >>> Just saying we really need to start thinking more about the future now >>> rather than waiting till we have mass issues across the board.. >>> >>> Loren Tedford (KC9ZHV) >>> Phone: >>> Fax: >>> Email: <lorentedford(a)gmail.com>lorentedford(a)gmail.com >>> Email: <KC9ZHV(a)KC9ZHV.com>KC9ZHV(a)KC9ZHV.com >>> <http://www.lorentedford.com>http://www.lorentedford.com >>> <http://www.kc9zhv.com>http://www.kc9zhv.com >>> <http://forum.kc9zhv.com>http://forum.kc9zhv.com >>> <http://hub.kc9zhv.com>http://hub.kc9zhv.com >>> <http://Ltcraft.net>http://Ltcraft.net >>> >>> On Mon, Jul 11, 2016 at 1:05 PM, Steve Zingman < <szingman(a)msgstor.com> >>> szingman(a)msgstor.com> wrote: >>> >>>> It's going to taker a LOT of work to change versions of Asterisk. >>>> That's not to say it will not happen. >>>> I can't re-create you crashes. >>>> I firewall my boxes to only allow access from trusted addresses for >>>> ssh. I use a VPN for roaming users. I don't support SIP. >>>> >>>> >>>> On 7/11/2016 2:02 PM, Loren Tedford wrote: >>>> >>>> I suppose while we are stepping on toes I want to ask about the proper >>>> way of securing a dial box from our wonderful hackers out their.. Been >>>> using ufw and fail2ban but found out recently nothing is invincible.. any >>>> thoughts?? By the way any progress on asterisk crashes?? I can't find a >>>> reason for the crashes in the logs.. >>>> >>>> Also what is the status on updating asterisk to a more current >>>> version?? Any issues with that?? >>>> >>>> Loren Tedford (KC9ZHV) >>>> Email: <lorentedford(a)gmail.com>lorentedford(a)gmail.com >>>> Phone: >>>> Fax: >>>> <http://www.lorentedford.com>http://www.lorentedford.com >>>> <http://kc9zhv.com>http://kc9zhv.com >>>> >>>> Sent from Droid Turbo from Verizon wireless network >>>> On Jul 11, 2016 12:34 PM, "Steve Zingman" < <szingman(a)msgstor.com> >>>> szingman(a)msgstor.com> wrote: >>>> >>>>> Yes, >>>>> I've seen it before. Ramesh asked the question here and a couple of us >>>>> had some questions as to his configuration. I think he is in process of >>>>> gathering info so we can trouble shoot more. >>>>> I't not hard to get lists confused. >>>>> >>>>> Steve >>>>> >>>>> On 7/11/2016 1:30 PM, DuaneVT . wrote: >>>>> >>>>> Thanks Steve. You have helped me several times here I believe. Perhaps >>>>> it was the ARM Allstar list I should have ranted to. As some posts get >>>>> shared between lists, it is hard not to end up on another list. >>>>> Here is an example. I felt for the questioner... >>>>> "Message: 3 >>>>> Date: Sun, 10 Jul 2016 09:53:39 -0400 >>>>> From: Doug Crompton < <doug(a)crompton.com>doug(a)crompton.com> >>>>> To: ARM Allstar < <arm-allstar(a)hamvoip.org>arm-allstar(a)hamvoip.org> >>>>> Subject: Re: [arm-allstar] Using "A" and "B" audio outputs using the >>>>> DIAL Image on a RPi >>>>> Message-ID: <BLU171-W25439CF444D3509E8F7BE5BA3E0(a)phx.gbl> >>>>> Content-Type: text/plain; charset="iso-8859-1" >>>>> >>>>> Ramesh, >>>>> >>>>> This is NOT a dial list, ask elsewhere! It works fine on the >>>>> hamvoip.org code. >>>>> 73 Doug >>>>> WA3DSP >>>>> <http://www.crompton.com/hamradio>http://www.crompton.com/hamradio >>>>> >>>>> >>>>> > To: <arm-allstar(a)hamvoip.org>arm-allstar(a)hamvoip.org >>>>> > Date: Sun, 10 Jul 2016 07:34:57 -0400 >>>>> > Subject: [arm-allstar] Using "A" and "B" audio outputs using the >>>>> DIAL Image on a RPi >>>>> > From: <arm-allstar(a)hamvoip.org>arm-allstar(a)hamvoip.org >>>>> > CC: <Ramesh(a)va3uv.com>Ramesh(a)va3uv.com >>>>> > >>>>> > Hi All: >>>>> > >>>>> > I am using the DIAL Image on a PRi 2; I would like to use the "A" and >>>>> > "B" audio outputs from my fob (A for voice and B for PL), so that I >>>>> can >>>>> > inject them into separate points on my exciter. >>>>> > >>>>> > I was able to get 2 'discrete' audio outputs when running ACID on a >>>>> PC. >>>>> > This doesn't seem to be working with the Pi / DIAL. Is anyone >>>>> running >>>>> > this configuration on a Pi? >>>>> > >>>>> > Thx, >>>>> > >>>>> > Ramesh. >>>>> > >>>>> > # 27919 and a truck load of others! >>>>> " >>>>> >>>>> Sheesh, I want to help everyone.... >>>>> Thanks again until my next question HERE, >>>>> Duane >>>>> >>>>> On Mon, Jul 11, 2016 at 1:06 PM, Steve Zingman < >>>>> <szingman(a)msgstor.com>szingman(a)msgstor.com> wrote: >>>>> >>>>>> Duane, >>>>>> When were you told on the App_rpt-users list to go elsewhere with >>>>>> DIAL questions? DIAL is the official distribution for AllStar. Support >>>>>> questions SHOULD be posted here. I know that other lists limit their >>>>>> support to THEIR distribution and have curtly told DIAL users to go >>>>>> elsewhere for support. I do not remember seeing your question on here. If I >>>>>> missed it, I'm sorry. I TRY to help out with DIAL and general Asterisk >>>>>> questions when possible. >>>>>> >>>>>> 73, Steve N4IRS >>>>>> INAD >>>>>> >>>>>> On 7/11/2016 12:42 PM, DuaneVT . wrote: >>>>>> >>>>>> I too have asked questions here concerning DIAL and been told curtly >>>>>> to go elsewhere. As DIAL distros have all the files included and interface >>>>>> to the FOBs and SBCs, where do we draw the line? I have followed all >>>>>> instructions for installing the software and had fresh boot problems. It >>>>>> was hard to tell where the problem was, but when I am new to Linux/DIAL and >>>>>> the whole Allstar project, I looked for guidance where I found discussions. >>>>>> There is an Allstar Link community on Google+, and you will see I have all >>>>>> except 1 postings! Crickets......... >>>>>> Perhaps the moderator/users here could post a list of URLs for >>>>>> different aspects of AllStar Link so us Newbies would know where to hang >>>>>> out. >>>>>> I have had GREAT support from other listers here by direct email >>>>>> after each post and I sincerely thank all who have taken an interest in >>>>>> someone who has to learn as we all do. >>>>>> 73, >>>>>> Duane KA1LM #42996 >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>>> >>>>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>>>> >>>>>> >>>>>> -- >>>>>> "Anything is possible if you don't know what you are talking about." >>>>>> 1st Law of Logic >>>>>> >>>>>> >>>>> >>>>> -- >>>>> "Anything is possible if you don't know what you are talking about." >>>>> 1st Law of Logic >>>>> >>>>> >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> <App_rpt-users(a)ohnosec.org>App_rpt-users(a)ohnosec.org >>>>> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit >>>>> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> >>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll >>>>> down to the bottom of the page. Enter your email address and press the >>>>> "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email >>>>> confirmation. If you have trouble unsubscribing, please send a message to >>>>> the list detailing the problem. >>>>> >>>> >>>> -- >>>> "Anything is possible if you don't know what you are talking about." >>>> 1st Law of Logic >>>> >>>> >>> >>> -- >>> "Anything is possible if you don't know what you are talking about." >>> 1st Law of Logic >>> >>> >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> > > -- > "Anything is possible if you don't know what you are talking about." > 1st Law of Logic > >

1 0