August 2017 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Micro-Node RTCM
by Mark Guibord 18 Oct '17

18 Oct '17

The RTCM uses a 16 bit DSP with a tightly integrated interrupt driven firmware package written in c http://www.microchip.com/wwwproducts/en/dsPIC33FJ128GP804 If you're interested here is a link to the open-source software for the RTCM.. http://svn.ohnosec.org/viewvc/projects/allstar/voter/board-firmware/?root=s… From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Doug Kingston Sent: Tuesday, April 25, 2017 9:41 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Micro-Node RTCM I know that I would have a GPS with 1pps feed to get the timing. Once you have that, what is different in an RTCM other than nice packaging? What is the core processor technology inside the RTCM. I am assuming is some form of ARM processor. Can you can you get a root shell and use SSH to access? -Doug- On Tue, Apr 25, 2017 at 7:50 PM, Fredric Moses <fred(a)moses.bz> wrote: You seem confused… you still need a linux system running app_rpt with the RTCM’s… think of the RTCM as an ethernet based radio interface vs usb.. But that radio interface when you add GPS to each one can do voting with others.. and with some more work simulcast transmitting… We have some 50-60 RTCM’s deployed and love them… Getting ready to rebuild another clubs VHF repeater voter system with a 6 site RTCM based voting system. I just started testing the new hamvoip rPi3 image with some rtcm’s myself... -- Fredric Moses - W8FSM - WQOG498 fred(a)moses.bz > On Apr 25, 2017, at 22:32, Doug Kingston <dpk(a)randomnotes.org> wrote: > > I am considering using these for a amateur repeater voting application. The alternative would be to roll my own with a Raspberry Pi 3 and probably the HamVOIP.org distribution. Who out there is using the RTCM? I can find very little information beyond the manual and I am concerned that the software may not be maintained and that there is not enough access to the underlying Linux system. > > Who can tell me more about the RTCM? > > Has anyone rolled their own with a Pi3? Any advice there? > > -Doug- > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

5 5

ctcss Encode Issues
by Michael "Lee" Lockwood 27 Sep '17

27 Sep '17

Hello, I am unable to get any ctcss to be encoded during transmit, except for the tone frequency that's entered in to the txctcssdetault field. If I change that tone, the new value gets transmitted. However, all of the other tones in the txctcssfreqs are being ignored. However, I do know that the rxctcssfreqs values are being decoded. If I transmit in to the repeater using a tone not listed, or without a tone, app_rpt ignores it and does not repeat and key up the transmitter. Any assistance is greatly appreciated. Thanks in advance! Here's what's in my usbradio.conf [usb] hdwtype=0 rxboost=1 txboost=1 rxctcssrelax=1 txctcssdefault=151.4 rxctcssfreqs=146.2,141.3,151.4 txctcssfreqs=146.2,141.3,151.4 ;rxctcssoverride=0 carrierfrom=usb ctcssfrom=dsp rxdemod=flat txprelim=yes txlimonly=no txtoctype=phase txmixa=composite txmixb=0 invertptt=0 duplex=1 rxondelay=0 rxnoisefiltype=0 eeprom=0 -- *Michael "Lee" Lockwood* michael(a)lockwood.us.com

5 20

portal config with "special" requirements
by George Csahanin 31 Aug '17

31 Aug '17

Using portal config for the first time and found an issue that there must be a work around for: I have two things I need always in rpt.conf, a node number's inside IP address 2360=radio@192.168.1.100:4569/2360,NONE because from inside the AT&T gateway I cannot get to its public address. So for testing now I need to connect with an entry in rpt.conf under [nodes] Also I need a startup macro to connect to a node I edit this in to the file but as soon as I do a portal upload these two things go away. Is there any way for portal config to allow stuff like this? Thanks all... GeorgeC W2DB/2360 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5710 office 401-338-0568 cel george(a)w2db.com

1 0

Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy
by Steve Zingman 31 Aug '17

31 Aug '17

If asterisk is not running, use asterisk -vvvcd Sent via smoke signal (Verizon) On Aug 30, 2017 11:05 PM, Bob <k6ecm1(a)gmail.com> wrote: When tried again xxxxxxx:~# asterisk -rvvv Asterisk 1535, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for detail s. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?) -----Original Message----- From: Bob [mailto:k6ecm1@gmail.com] Sent: Wednesday, August 30, 2017 8:01 PM To: 'Users of Asterisk app_rpt' Subject: RE: [App_rpt-users] RAT_rc1 on Pi3 a no joy Verbosity was 0 and is now 3 [Aug 30 19:59:55] NOTICE[655]: app_rpt.c:22032 rpt_master: RPT thread restarted on 1901 [Aug 30 19:59:55] WARNING[655]: app_rpt.c:22044 rpt_master: rpt_thread restarted on node 1901 -- Re-Loading config for repeater 1901 -- rpt (Rx) initiating call to Radio/usb on Radio/usb == Set device 1-1.2:1.0 to usb [Aug 30 19:59:55] WARNING[693]: chan_usbradio.c:1744 hidthread: File usbradio_tune_usb.conf not found, device usb using default parameters. xxxxxxx*CLI> Disconnected from Asterisk server Executing last minute cleanups -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Wednesday, August 30, 2017 7:55 PM To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy rename usbradio_tune_usb.conf to usbradio_tune_usb.conf.save and see what happens. Check modules.conf for only the proper channel driver loaded. Steve On 08/30/2017 10:50 PM, Bob wrote: > Bob here, not out of the woods quite yet. > > I'm replacing a private node computer with a RPi3. I've started with copying > over the /etc/asterisk/*.conf files. Asterisk is crashing on me at regular > intervals. Here are the errors I'm receiving. Each time the message > "--Re-loadign config for repeater..." occurs seems to correspond with the > green light going solid instead of pulsing. > > Any ideas are appreciated. > > Thanks, > Bob > > Verbosity was 0 and is now 3 > [Aug 30 19:43:52] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread > restarted on 1901 > [Aug 30 19:43:52] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread > restarted on node 1901 > -- Re-Loading config for repeater 1901 > -- rpt (Rx) initiating call to Radio/usb on Radio/usb > == Set device 1-1.2:1.0 to usb > [Aug 30 19:43:52] WARNING[794]: chan_usbradio.c:1743 hidthread: Loaded > parameter s from usbradio_tune_usb.conf for > device usb . > [Aug 30 19:43:54] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread > restarted on 1901 > [Aug 30 19:43:54] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread > restarted on node 1901 > -- Re-Loading config for repeater 1901 > -- rpt (Rx) initiating call to Radio/usb on Radio/usb > == Set device 1-1.2:1.0 to usb > [Aug 30 19:43:54] WARNING[796]: chan_usbradio.c:1743 hidthread: Loaded > parameter s from usbradio_tune_usb.conf for > device usb . > [Aug 30 19:43:56] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread > restarted on 1901 > [Aug 30 19:43:56] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread > restarted on node 1901 > -- Re-Loading config for repeater 1901 > -- rpt (Rx) initiating call to Radio/usb on Radio/usb > == Set device 1-1.2:1.0 to usb > [Aug 30 19:43:56] WARNING[798]: chan_usbradio.c:1743 hidthread: Loaded > parameter s from usbradio_tune_usb.conf for > device usb . > [Aug 30 19:43:58] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread > restarted on 1901 > [Aug 30 19:43:58] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread > restarted on node 1901 > -- Re-Loading config for repeater 1901 > -- rpt (Rx) initiating call to Radio/usb on Radio/usb > == Set device 1-1.2:1.0 to usb > [Aug 30 19:43:58] WARNING[800]: chan_usbradio.c:1743 hidthread: Loaded > parameter s from usbradio_tune_usb.conf for > device usb . > [Aug 30 19:44:00] NOTICE[764]: app_rpt.c:22032 rpt_master: RPT thread > restarted on 1901 > [Aug 30 19:44:00] WARNING[764]: app_rpt.c:22044 rpt_master: rpt_thread > restarted on node 1901 > -- Re-Loading config for repeater 1901 > -- rpt (Rx) initiating call to Radio/usb on Radio/usb > == Set device 1-1.2:1.0 to usb > [Aug 30 19:44:00] WARNING[802]: chan_usbradio.c:1743 hidthread: Loaded > parameter s from usbradio_tune_usb.conf for > device usb . > [Aug 30 19:44:02] ERROR[764]: app_rpt.c:22027 rpt_master: Continual RPT > thread restarts, killing Asterisk > > -----Original Message----- > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On > Behalf Of Steve Zingman > Sent: Wednesday, August 30, 2017 8:12 AM > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] RAT_rc1 on Pi3 a no joy > > Oh what a surprise, a PS issue with a Pi. ;) > do the following as root: > touch /etc/asterisk/firsttime > firsttime > > Or, if all you want to do is set the TZ. > dpkg-reconfigure tzdata > > > On 8/30/2017 11:08 AM, Bob Pyke wrote: >> Powersupply (sigh!!!) >> >> Asterisk is happy. Is ther a first time script for setting up time zone or > is this manual? >> Thanks, >> Bob >> >> Sent from my iPhone >> >>> On Aug 30, 2017, at 5:50 AM, Steve Zingman <szingman(a)msgstor.com> wrote: >>> >>> We have not had any reports of crashing on a RPI3 I have a test node > built on a RPI3 that I use to verify proper operation. >>> The ssh file is at /etc/ssh/sshd_config >>> >>> 73, Steve N4IRS >>> >>>> On 8/30/2017 8:45 AM, Bob Pyke wrote: >>>> Not able to get past the Linux continual crashing and rebooting. The > experience is quite similar on two RPi3s. It does not crash on an RPi2, > which has allowed me to poke around this build a bit. I can't locate the ssh > file for edit. This build does not seem to follow the docs.Allstarlink > website for file name and location. >>>> The original RPi build seems to work on both variants of RPi. >>>> >>>> Thanks, >>>> Bob >>>> >>>> Sent from my iPhone >>>> >>>>>> On Aug 29, 2017, at 9:42 PM, Bryan Fields <Bryan(a)bryanfields.net> > wrote: >>>>>> On 8/30/17 12:41 AM, Bob Pyke wrote: >>>>>> Asterisk does not start. >>>>> What do the logs say? Can you run asterisk in the foreground and see > what it >>>>> outputs as errors? >>>>> >>>>> -- >>>>> Bryan Fields >>>>> >>>>> 727-409-1194 - Voice >>>>> http://bryanfields.net >>>>> _______________________________________________ >>>>> App_rpt-users mailing list >>>>> App_rpt-users(a)lists.allstarlink.org >>>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>>> >>>>> To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" >>>>> You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

RAT_rc1 on Pi3 a no joy
by Bob Pyke 31 Aug '17

31 Aug '17

I can't seem to get past loading DIAL, and changing the password. I found and tried "first time" without success. Tried loading a known good set of config files in /etc/asterisk, without success. Asterisk does not start. Rebooted the Pi3 using a card from another node to see if the Pi3 and URIx are working. Pi3 boots fine, and asterisk runs. Looking for suggestions. Thanks, Bob P.S.Fresh RAT_rc1 download from asterisklink website. Sent from my iPhone

5 10

radio-tune-menu problem
by George Csahanin 29 Aug '17

29 Aug '17

Folks, I've searched for solutions with this. But downloaded RAT_RC1.img and put it in a SD card, etc, Pi3, etc. First issue was the nodesetup erroring out and not setting up things like which channel driver and so on, but I manually setup rpt.conf to be simpleusb and the right node number, manually edited modules.conf to enable simpleusb, manually setup simpleusb.conf. Now I have the node where it works. Passes audio but went to setup levels. RX audio to net is too high. I made a file for tune factrors in /etc/asterisk simpleusb_tune_usb_27170.conf : [usb] ; name=usb ; devicenum=0 devstr=3-1 rxmixerset=25 txmixaset=999 txmixbset=999 The txmix settings work, the rx ones don't seem to. Same hardware, other distro and could get the audio right. but... radio-tune-menu won't run: root@repeater:~# radio-tune-menu Error parsing device parameters I'm lost as to where to look. Running on my nodes either limey or ACID. I had another person's image for the Pi but arch linux is a nightmare (and this coming from a 21 year veteran of slackware). Building a node for N5JGX, which I along with W8VT will be admin for. So I downloaded RAT_RC1 figuring I'd stick with the successors, heirs or designee of the founder. But hope someone can give me some direction where to look. If it can't parse device parameters...where do they live?? Thanks All y'all GeorgeC W2DB 2360 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel http://dyb.com PLEASE NOTE: Effective January 1, 2018 george(a)dyb.com will no longer function USE george(a)w2db.com

3 3

ilbc codec source code ?
by Toussaint OTTAVI 27 Aug '17

27 Aug '17

Hi, I wanted to do some tests with low bandwidth codecs for mobile IAX2 users. I tried to configure iLBC, but the module codec_ilbc.so is not present. Having a look at my Asterisk source folder (/usr/src/astsrc-1.4.23-pre/asterisk/codecs/), there's an "ilbc" sub-folder, but it only contains a Makefile, not the source files. This Asterisk install is rather old, I don't remember how I installed it, and where I got the sources. Where could I find the missing ilbc codec source files ? 73 de TK1BI

4 11

Hurricane Harvey
by David Shaw 26 Aug '17

26 Aug '17

ARRL Wesite: http://www.arrl.org/news/amateur-radio-preparations-continue-for-category-4… The Hurricane Watch Net (*HWN* <http://www.hwn.org/>) remains active in “Catastrophic Response Mode” on both 14.325 MHz and 7.268 MHz. The *VoIP Hurricane Net* <http://www.voipwx.net/> activated today (connect at *WX_TALK* Echolink conference node: 7203/IRLP 9219. Stations on All-Star can connect to the Echolink side of the system by dialing *033007203). The Southern Territory *SATERN* <http://www.satern.org/> Net will activate at least for one day on Saturday, from 0900 until 2000 CT on its regular frequency of 7.262 MHz. WX4NHC at the National Hurricane Center activated at 2100 UTC on Friday. -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson

1 0

Codecs again : g729 ?
by Toussaint OTTAVI 25 Aug '17

25 Aug '17

What about using g729 codec ? It requires a licence for commercial use, but the use for "educational purposes" is allowed ;-) It seems to be the best quality/bandwidth ratio available (8 kbits/s) I had a quick look : Asterisk/app_rpt has a "format g729" but no "codec g729", and the corresponding rows/columns in the translation matrix are empty. Did someone already try to install and use g729 ? 73 de TK1BI

1 0

Eclipse QSO
by Lu V 21 Aug '17

21 Aug '17

Has anyone coordinated a QSO party to allow nodes in totality zones to share the experience of the solar eclipse today? Jeff, K0JSC, is Burness doing anything? If nothing has been setup, I'll be happy to host it on 27892 FLA Hub. But hoping that someone has already thought of this in advance and has already announced it. 73, Lu Vencl KA4EPS

1 0