December 2018 - App_rpt-users - lists.keekles.org

TECHNICAL QUESTION re: Echolink
by George Csahanin 27 Dec '18

27 Dec '18

I have not been paying attention and may have missed something. But... having problem opening echolink port. This has worked in the past but I disabled by removing the config file. But is there anything else in app_rpt that could inhibit Echolink? My config file looks correct in my 2360 and 28599 boxes. But when doing netstat I don't see the three ports open. Somebody have a nudge in the right direction? GeorgeC W2DB 2360, 28599 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

2 1

Modules.conf: autoload
by Bob Pyke 27 Dec '18

27 Dec '18

How does the “autoload” command work in modules.conf, and when would want to say =yes, and =no? Thanks, Bob K6ECM 73

2 2

Re: [App_rpt-users] Allstar Node
by larry 26 Dec '18

26 Dec '18

3 2

iaxRPT updates
by Dan Keizer 25 Dec '18

25 Dec '18

HI there - I noticed there's been some discussion on some upcoming updates to the iaxRPT program. I've used this with the hamvoip distribution and dvswitch distros and it works well for accessing your node remotely. I mostly use iaxrpt on my android system while mobile, but I've used it occasionally with windows. Anyways -- there has been an upgrade to the android public version. The dvswitch-mobile version (with lots of new features :-) ) will be public released in a couple of days ... looking forward to the new features. 73, Dan ve4drk

7 8

Warning messages
by Marco Brunozzi 24 Dec '18

24 Dec '18

Hi everyone, I noted this very frequent repetition of warning messages. Is this normal? If not, what should I be looking at to fix the problem. Thanks. [Dec 24 22:51:06] WARNING[11222]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:51:06] WARNING[11224]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 24 22:51:57] WARNING[11218]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:51:57] WARNING[11220]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 24 22:52:47] WARNING[11224]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:52:47] WARNING[11216]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 24 22:53:38] WARNING[11220]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:53:38] WARNING[11222]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest == Refreshing DNS lookups. [Dec 24 22:54:28] WARNING[11216]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:54:29] WARNING[11218]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest == Parsing '/etc/asterisk/gps.conf': Found [Dec 24 22:55:19] WARNING[11222]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:55:19] WARNING[11224]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest [Dec 24 22:56:09] WARNING[11218]: chan_iax2.c:10127 iax2_do_register: REGISTER-LOG: Sending registration request for '28163' [Dec 24 22:56:10] WARNING[11220]: chan_iax2.c:7690 registry_rerequest: REGISTER-LOG: registry rereqquest repeater*CLI> 73 and Merry Christmas, Marco IW0RED. -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------

2 2

Neophyte user
by AD2TM 24 Dec '18

24 Dec '18

Greetings of the season to all. Over the past year I have been unsuccessful at getting an installation to Allstar Asterisk to function. I even tried the, excuse me, Ham VOIP version and did not have any luck with that either. I have tried the X86 version and the Raspberry version. Yes I installed the X86 version on an old Dell laptop. The Pi version was on a Pi 3, with a 16GB card. Is there or can someone create a step by step guide for installation? Do not say all you have to do is follow the setup script. That did not work for me. The material on the website is very confusing to me. I only want to set up a simple remote base. I have the RMK URI. The radio I am using is a Motorola CDM1500 LS. 73 Tom AD2TM

6 7

Error during installation
by Marco Brunozzi 23 Dec '18

23 Dec '18

Hi, I'm trying to install asl from sources on my bananapi: Linux bananapim2plus 4.14.84-sunxi #3 SMP Sat Dec 1 07:18:41 CET 2018 armv7l GNU/Linux As explained here: https://wiki.allstarlink.org/wiki/ASL_FAQ During the installation appear some errors here: /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log Especially this: make -C linux all make[1]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' make -C drivers/dahdi/firmware firmware-loaders make[2]: Entering directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make[2]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi/firmware' make -C /lib/modules/4.14.84-sunxi/build SUBDIRS=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/drivers/dahdi DAHDI_INCLUDE=/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m make[2]: Entering directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:644: arch/-a: No such file or directory Makefile:644: armhf/Makefile: No such file or directory make[2]: *** No rule to make target 'armhf/Makefile'. Stop. make[2]: Leaving directory '/usr/src/linux-headers-4.14.84-sunxi' Makefile:74: recipe for target 'modules' failed make[1]: *** [modules] Error 2 make[1]: Leaving directory '/var/lib/dkms/asl-dahdi-linux/2.11.1/build/linux' Makefile:9: recipe for target 'all' failed make: *** [all] Error 2 What can I do? Thanks, Marco IW0RED -- Marco Brunozzi Tel. +14152360004 Cel. +393483343274 Skype: marco.brunozzi Twitter: marcobrunozzi ---------------------------------------

1 0

hub to simpleusb
by ea8ee 22 Dec '18

22 Dec '18

I have used my node as a hub for a long time and now I want to use it as a simple usb with uri which files I should modify

2 1

MDC-1200 & Notch FIlter
by John 22 Dec '18

22 Dec '18

Hello to the group, Please pardon - I'm a noobie at some of this... I am trying to get MDC1200 encode and decode operating on an RPi3 that is running the most updated Hamvoip build. I followed instructions at http://docs.allstarlink.org/drupal/node/104 and cloned the KA6SQG mdc-encode-decode library and copied all the .c and .h files into the apps directory. I also did the same for mkfilter. I attempted to compile the latest version of Allstar on github with the #include lines for encode, decode and notch filter uncommented in app_rpt.c. ./configure completes without any errors, but I get the following error when it gets to doing something with aelparse. collect2: error: ld returned 1 exit status /usr/src/Asterisk/asterisk/Makefile.rules:78: recipe for target 'aelparse' failed make[1]: *** [aelparse] Error 1 rm simpleusb-tune-menu.o radio-tune-menu.o pi-tune-menu.o make[1]: Leaving directory '/usr/src/Asterisk/asterisk/utils' Makefile:364: recipe for target 'utils' failed make: *** [utils] Error 2 Note: I can't run the gcc 4.9 library on an Armv7 RPi3. Only v5.3.0 will compile. (Not sure if running 5.3.0 is causing the problem. The comments at https://github.com/AllStarLink/Asterisk say to run 4.9.) Please advise with instructions on how to solve this issue. Thank you kindly, and Merry Christmas. John R. Chartkoff, N1CTF Columbus, Ohio Cell: 850-902-1147

1 0

Allmon/2
by k7ilo1＠gmail.com 22 Dec '18

22 Dec '18

Hey gang. Quick question... I'v seen it thrown around in the group here but just wanted to know if this add on is part of the other group that claims to be the developers of Allstarlink. Just asking and hope not to stir up anything. That is not my intention. Thanks Harold K7ILO 27863

9 13