December 2018 - App_rpt-users - lists.keekles.org

Limey Unix
by Todd Lesser 05 Mar '19

05 Mar '19

Does anyone know how to save the network configuration in Limey Linux? My node is currently set up as static IP and I want to change it to DHCP. I run net setup but when I reboot, it loses it all. I assume there is a command that will save it to flash memory. Does anyone know what that is? Thanks

4 4

CM119 USB interface
by Brian G 05 Jan '19

05 Jan '19

Hi all, Merry Christmas My local club is working on setting up a few ASL nodes, and I've been busy modifying some CM119 based USB sound cards to control the radios. I'm using this card/dongle: https://www.amazon.ca/Syba-SD-CM-UAUD-Adapter-C-Media-Chipset/dp/B001MSS6CS I've done several so far and have a few nodes working great with CTCSS carrier detect. One issue I'm consistently running into, is when setting the "RX Squelch Level" in the radio-tune-menu, it detects the current RX signal strength as 999. This results in the inability to use anything other than CTCSS for carrier detect. I can make plain old VOX work too, but it results in considerable (2 sec+) hang time. Using DSP carrier detect won't work because it's impossible to set the squelch high enough (max value 999). It always thinks there's a signal present when there isn't. This happens regardless of whether there's a radio connected to the dongle or not. As a matter of fact it happens even when plugging in an unmodified dongle right out of the package. I need it to work with no CTCSS. VOX would be fine if it wasn't for the hang time, but would rather use the DSP option in usbradio.conf. I assume it's just the nature of the beast, and if I want it done properly I need an adapter and radio capable of COS. But maybe someone knows if there's something that can be done or not? Anyone have any insight on how to either eliminate the VOX hang time, or eliminate that "invisible" signal? I might be overlooking something. Thanks for reading! -- Brian - VA3DXV

8 26

apt-get install allstarlink
by Corey 31 Dec '18

31 Dec '18

Can I use it on an existing Ubuntu 18.04 install or is the package only intended for a Raspberry Pi install? Thanks, Corey

6 8

apt-get install allstarlink
by Corey 31 Dec '18

31 Dec '18

Mike, Sorry for the lack of information. I keep forgetting people can't read my mind. The software image currently loaded is Ubuntu 18.04 LTS. The hardware is a no name Chinese mini ITX box quad core Intel(R) Celeron(R) CPU J1900 @ 1.99GHz computer, 2 gig memory and 64 gig ssd. It is going to be used for an ASL voter setup, LAMP server for Allmon2, and team viewer. 73 Corey Badgley

2 1

allstar +irlp
by ea8ee 31 Dec '18

31 Dec '18

I have an irlp node that I have not used for some time, I could add it to my allstar node and how? ea8ee movil

4 6

Setting hostname
by Bob Pyke 31 Dec '18

31 Dec '18

I’m trying to figure out what I’m doing wrong. I set the host name in asl-menu, but it doesn’t take, so I edit /etc/hostname, which works. What am I missing? I performed an update after. Could that be an issue? Thanks, Bob K6ECM 73

1 0

K0HYT Remote base
by m＠palmers-family.com 30 Dec '18

30 Dec '18

Hello everyone. After a couple years of playing with AllStar on RPI I have finally dove into my remote base setup. I am using a Pi3 with a IC706MKIIG, Prolific USB adapter (known working). When I add the radio=ic706 line and restart Asterisk I notice the heartbeat led locks solid and asterisk crashes when I connect to 1999. If I comment out that one line it works fine. I have set permissions to /dev/USB0. Any ideas? I have attached a PDF with my screenshots and node stanza. Thanks in advance for any help. Rpi 3 Arch IC706MkIIG Hamvoip V 1.4rc5-14 Asterisk 1.3.23.pre.hamvoip-CV1.5.3-48-app_rpt-0.327-11

3 2

Re: [App_rpt-users] Allstar Node
by Russell Thomas 28 Dec '18

28 Dec '18

Hey Rodger, Unfortunately, I don't have a document for building a Allstar with a radio. The first article on my website covers a Allstar to DMR bridge and setting up a radioless Allstar hub. However, I bought a Yellow box from George WB3DZZ. He has taken those BF radios apart and made his connections to that and the sound cards his nodes also come with the HamVoip software. He may can give you some tips since you have most all the pieces. Otherwise, I would point you to the Allstar email list. I like the HamVoip software but you can run ASL as well on a Raspberry Pi. here are the emails for both groups: HamVoip: arm-allstar(a)hamvoip.org Web: https://hamvoip.org ASL: app_rpt-users(a)lists.allstarlink.org Web: https://allstarlink.org Hope that helps let me know if you have any questions. 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR Private: 3101393 DMR TG: 31013 D-Star Call Route (UR): KV4S D-Star: XRF334C AllStar: 47923 IRLP: 4535 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com On Tue, Dec 25, 2018 at 9:45 PM Rodger Hanson <rodger_hanson(a)slingshot.co.nz> wrote: > Hello Russell > > I was put onto you from a fellow ham here in New Zealand, that said you > had a very good document on how to put together an allstar node. > > I have a Raspberry Pi 3, and couple of BF888s radios and two USB sound > cards, but not sure on the software to put onto the raspberry pi 3 and > how to connect it all. > > Would you mind sharing you document if one should exist? > > Have a Merry Christmas and happy New Year. > > 73 de Rodger - ZL1RAH > >

16 38

Re: [App_rpt-users] App_rpt-users Digest, Vol 118, Issue 25
by Tom 27 Dec '18

27 Dec '18

Thanks Willem, That was well said. David, release the source code. K5TRA -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of app_rpt-users-request(a)lists.allstarlink.org Sent: Thursday, December 27, 2018 6:00 AM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 118, Issue 25 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: Allstar Node (Mike Besemer) 2. Re: Allstar Node (David McGough) 3. Re: Allstar Node (Mike Besemer) 4. Re: Allstar Node (David McGough) 5. Re: Allstar Node (Bryan Fields) 6. Re: Allstar Node (David McGough) 7. Re: Allstar Node (Mike Besemer) 8. Re: Allstar Node (EDPnJAX) 9. Re: Allstar Node (David McGough) 10. Re: Allstar Node (EDPnJAX) 11. Re: Allstar Node (Willem Schreuder) 12. Re: Allstar Node (Bryan D. Boyle) 13. Re: Allstar Node (Mike Besemer) 14. Re: Allstar Node (Mike Besemer) 15. Re: Allstar Node (cnovey) 16. Re: Allstar Node (Willem Schreuder) 17. Re: Allstar Node (JJC) 18. Re: Allstar Node (Bryan D. Boyle) 19. Re: Allstar Node (Willem Schreuder) 20. Re: Allstar Node (David McGough) 21. Re: Allstar Node (larry) 22. Re: Allstar Node (David McGough) 23. Re: Allstar Node (walter) 24. Re: Allstar Node (David McGough) 25. Re: Allstar Node (Andrew Sylthe) 26. Re: Allstar Node (David McGough) 27. Re: Allstar Node (David Shaw) 28. Re: Allstar Node (Andrew Sylthe) 29. Re: Allstar Node (jimmy keffer) 30. Re: Allstar Node (Willem Schreuder) 31. Re: Allstar Node (David McGough) 32. Limey Unix (Todd Lesser) 33. Re: Limey Unix (Mike) 34. Re: Allstar Node (Willem Schreuder) 35. Modules.conf: autoload (Bob Pyke) 36. Re: Modules.conf: autoload (Mike) 37. Re: Allstar Node (David McGough) 38. Re: Modules.conf: autoload (Bob Pyke) 39. Re: Allstar Node (JJC) 40. Re: Allstar Node (Willem Schreuder) ---------------------------------------------------------------------- Message: 1 Date: Wed, 26 Dec 2018 07:56:51 -0500 From: "Mike Besemer" <mwbesemer(a)cox.net> To: "'Users of Asterisk app_rpt'" <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <000f01d49d1a$78af6c60$6a0e4520$(a)cox.net> Content-Type: text/plain; charset="UTF-8" Careful Larry... cross the wrong guy and you could end up with a website registered against your callsign linked to a porn site. -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of larry Sent: Wednesday, December 26, 2018 3:33 AM To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] Allstar Node Bryan, I try to refrain from posting to the negative stuff on the email lists. However I must say every time someone makes a post and the word Hamvoip happens to appear in their post you have to follow up with some negative BS that has nothing to do with the original posting. Nor is it helpful to the poster. Frankly you do more harm than good with all the negative comments while trying to promote ASL. I am sure I am not the only one that wishes you would take your rant someplace else. It's gotten REAL OLD!!! With all your knowledge and ability the help you do provide when the Hamvoip word DOES NOT appear in a posting is excellent. How about take your personal rant elsewhere? Larry - N7FM On 12/25/18 9:57 PM, Bryan Fields wrote: > On 12/26/18 12:05 AM, Russell Thomas wrote: >> However, I bought a Yellow box from George WB3DZZ. He has taken those BF >> radios apart and made his connections to that and the sound cards his nodes >> also come with the HamVoip software. > I'd caution anyone from selling pirated software, as it's criminal copyright > infringement. I'd hate to see people unknowingly caught up in it. > > 73's _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 2 Date: Wed, 26 Dec 2018 08:19:10 -0500 (EST) From: David McGough <kb4fxc(a)inttek.net> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <Pine.LNX.4.44.1812260801000.3827-100000(a)goliath.inttek.net> Content-Type: TEXT/PLAIN; charset=US-ASCII Yeah, Like me! Have a look at: http://kb4fxc.com http://kb4fxc.net http://kb4fxc.org Typical behavior of Bryan, W9CR, the blooming idiot! This is the same behavior he uses against anybody who he passionately dislikes. He starts a ugly disinformation campaign. Take the Florida Repeater council, as another example: http://frcreform.org/ Well, the old saying that applies is simple: Give a fool enough rope and they'll hang themselves. W9CR's comments on Reddit about ham radio: "It's now a hobby full of Luddites, racists, and narcissists" just show what a hypocrite he is. So, if you, too, are one of the "lucky ones" who W9CR has posted LIBELOUS content about, send me a personal e-mail. I would like to discuss the situation with you. W9CR is damaged goods. 73, David KB4FXC On Wed, 26 Dec 2018, Mike Besemer wrote: > Careful Larry... cross the wrong guy and you could end up with a website registered against your callsign linked to a porn site. > > > > -----Original Message----- > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of larry > Sent: Wednesday, December 26, 2018 3:33 AM > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] Allstar Node > > Bryan, > > I try to refrain from posting to the negative stuff on the email lists. > However I must say every time someone makes a post and the word Hamvoip > happens to appear in their post you have to follow up with some negative > BS that has nothing to do with the original posting. Nor is it helpful > to the poster. Frankly you do more harm than good with all the negative > comments while trying to promote ASL. I am sure I am not the only one > that wishes you would take your rant someplace else. It's gotten REAL > OLD!!! With all your knowledge and ability the help you do provide when > the Hamvoip word DOES NOT appear in a posting is excellent. How about > take your personal rant elsewhere? > > Larry - N7FM > > > On 12/25/18 9:57 PM, Bryan Fields wrote: > > On 12/26/18 12:05 AM, Russell Thomas wrote: > >> However, I bought a Yellow box from George WB3DZZ. He has taken those BF > >> radios apart and made his connections to that and the sound cards his nodes > >> also come with the HamVoip software. > > I'd caution anyone from selling pirated software, as it's criminal copyright > > infringement. I'd hate to see people unknowingly caught up in it. > > > > 73's > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > ------------------------------ Message: 3 Date: Wed, 26 Dec 2018 08:38:50 -0500 From: "Mike Besemer" <mwbesemer(a)cox.net> To: "'Users of Asterisk app_rpt'" <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <000001d49d20$563cda90$02b68fb0$(a)cox.net> Content-Type: text/plain; charset="us-ascii" I wonder if the registration for those sites looks like the info below. Whoever the registrant is, that individual is a total coward. Raw WHOIS Record Domain Name: Registry Domain ID: 2047650657_DOMAIN_COM-VRSN Registrar WHOIS Server: whois.gandi.net Registrar URL: http://www.gandi.net Updated Date: 2018-10-25T00:53:18Z Creation Date: 2016-07-29T23:33:44Z Registrar Registration Expiration Date: 2020-07-29T23:33:44Z Registrar: GANDI SAS Registrar IANA ID: 81 Registrar Abuse Contact Email: abuse(a)support.gandi.net Registrar Abuse Contact Phone: +33.170377661 Reseller: Domain Status: clientTransferProhibited http://www.icann.org/epp#clientTransferProhibited Domain Status: Domain Status: Domain Status: Domain Status: Registry Registrant ID: REDACTED FOR PRIVACY Registrant Name: REDACTED FOR PRIVACY Registrant Organization: Registrant Street: REDACTED FOR PRIVACY Registrant City: REDACTED FOR PRIVACY Registrant State/Province: Florida Registrant Postal Code: REDACTED FOR PRIVACY Registrant Country: US Registrant Phone: REDACTED FOR PRIVACY Registrant Phone Ext: Registrant Fax: REDACTED FOR PRIVACY Registrant Fax Ext: Registrant Email: 393fd6bba52377f8a56fdae18d5e2b45-8987766(a)contact.gandi.net Registry Admin ID: REDACTED FOR PRIVACY Admin Name: REDACTED FOR PRIVACY Admin Organization: REDACTED FOR PRIVACY Admin Street: REDACTED FOR PRIVACY Admin City: REDACTED FOR PRIVACY Admin State/Province: REDACTED FOR PRIVACY Admin Postal Code: REDACTED FOR PRIVACY Admin Country: REDACTED FOR PRIVACY Admin Phone: REDACTED FOR PRIVACY Admin Phone Ext: Admin Fax: REDACTED FOR PRIVACY Admin Fax Ext: Admin Email: 393fd6bba52377f8a56fdae18d5e2b45-8987766(a)contact.gandi.net Registry Tech ID: REDACTED FOR PRIVACY Tech Name: REDACTED FOR PRIVACY Tech Organization: REDACTED FOR PRIVACY Tech Street: REDACTED FOR PRIVACY Tech City: REDACTED FOR PRIVACY Tech State/Province: REDACTED FOR PRIVACY Tech Postal Code: REDACTED FOR PRIVACY Tech Country: REDACTED FOR PRIVACY Tech Phone: REDACTED FOR PRIVACY Tech Phone Ext: Tech Fax: REDACTED FOR PRIVACY Tech Fax Ext: Tech Email: 393fd6bba52377f8a56fdae18d5e2b45-8987766(a)contact.gandi.net Name Server: NS-157-A.GANDI.NET Name Server: NS-66-B.GANDI.NET Name Server: NS-236-C.GANDI.NET Name Server: Name Server: Name Server: Name Server: Name Server: Name Server: Name Server: DNSSEC: Unsigned URL of the ICANN WHOIS Data Problem Reporting System: http://wdprs.internic.net/ >>> Last update of WHOIS database: 2018-12-26T13:36:00Z <<< For more information on Whois status codes, please visit https://www.icann.org/epp Reseller Email: Reseller URL: Personal data access and use are governed by French law, any use for the purpose of unsolicited mass commercial advertising as well as any mass or automated inquiries (for any intent other than the registration or modification of a domain name) are strictly forbidden. Copy of whole or part of our database without Gandi's endorsement is strictly forbidden. A dispute over the ownership of a domain name may be subject to the alternate procedure established by the Registry in question or brought before the courts. For additional information, please contact us via the following form: https://www.gandi.net/support/contacter/mail/ -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David McGough Sent: Wednesday, December 26, 2018 8:19 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Allstar Node Yeah, Like me! Have a look at: http://kb4fxc.com http://kb4fxc.net http://kb4fxc.org Typical behavior of Bryan, W9CR, the blooming idiot! This is the same behavior he uses against anybody who he passionately dislikes. He starts a ugly disinformation campaign. Take the Florida Repeater council, as another example: http://frcreform.org/ Well, the old saying that applies is simple: Give a fool enough rope and they'll hang themselves. W9CR's comments on Reddit about ham radio: "It's now a hobby full of Luddites, racists, and narcissists" just show what a hypocrite he is. So, if you, too, are one of the "lucky ones" who W9CR has posted LIBELOUS content about, send me a personal e-mail. I would like to discuss the situation with you. W9CR is damaged goods. 73, David KB4FXC On Wed, 26 Dec 2018, Mike Besemer wrote: > Careful Larry... cross the wrong guy and you could end up with a website registered against your callsign linked to a porn site. > > > > -----Original Message----- > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of larry > Sent: Wednesday, December 26, 2018 3:33 AM > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] Allstar Node > > Bryan, > > I try to refrain from posting to the negative stuff on the email lists. > However I must say every time someone makes a post and the word Hamvoip > happens to appear in their post you have to follow up with some negative > BS that has nothing to do with the original posting. Nor is it helpful > to the poster. Frankly you do more harm than good with all the negative > comments while trying to promote ASL. I am sure I am not the only one > that wishes you would take your rant someplace else. It's gotten REAL > OLD!!! With all your knowledge and ability the help you do provide when > the Hamvoip word DOES NOT appear in a posting is excellent. How about > take your personal rant elsewhere? > > Larry - N7FM > > > On 12/25/18 9:57 PM, Bryan Fields wrote: > > On 12/26/18 12:05 AM, Russell Thomas wrote: > >> However, I bought a Yellow box from George WB3DZZ. He has taken those BF > >> radios apart and made his connections to that and the sound cards his nodes > >> also come with the HamVoip software. > > I'd caution anyone from selling pirated software, as it's criminal copyright > > infringement. I'd hate to see people unknowingly caught up in it. > > > > 73's > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 4 Date: Wed, 26 Dec 2018 08:46:35 -0500 (EST) From: David McGough <kb4fxc(a)inttek.net> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <Pine.LNX.4.44.1812260843130.3827-100000(a)goliath.inttek.net> Content-Type: TEXT/PLAIN; charset=US-ASCII Notice that the Registrant state is Florida! Agreed, he is a BULLY and a COWARD. -------------------------------------------------- mcgough@david-vb:~$ whois kb4fxc.org Domain Name: KB4FXC.ORG Registry Domain ID: D402200000007333526-LROR Registrar WHOIS Server: whois.gandi.net Registrar URL: http://www.gandi.net Updated Date: 2018-10-25T03:47:18Z Creation Date: 2018-08-25T19:07:53Z Registry Expiry Date: 2019-08-25T19:07:53Z Registrar Registration Expiration Date: Registrar: Gandi SAS Registrar IANA ID: 81 Registrar Abuse Contact Email: abuse(a)support.gandi.net Registrar Abuse Contact Phone: +33.170377661 Reseller: Domain Status: clientTransferProhibited https://icann.org/epp#clientTransferProhibited Registrant Organization: Registrant State/Province: FL Registrant Country: US Name Server: NS-169-A.GANDI.NET Name Server: NS-145-C.GANDI.NET Name Server: NS-165-B.GANDI.NET DNSSEC: unsigned URL of the ICANN Whois Inaccuracy Complaint Form https://www.icann.org/wicf/) >>> Last update of WHOIS database: 2018-12-26T13:41:38Z <<< On Wed, 26 Dec 2018, Mike Besemer wrote: > I wonder if the registration for those sites looks like the info below. > > Whoever the registrant is, that individual is a total coward. > > Raw WHOIS Record > > Domain Name: > Registry Domain ID: 2047650657_DOMAIN_COM-VRSN > Registrar WHOIS Server: whois.gandi.net > Registrar URL: http://www.gandi.net > Updated Date: 2018-10-25T00:53:18Z > Creation Date: 2016-07-29T23:33:44Z > Registrar Registration Expiration Date: 2020-07-29T23:33:44Z > Registrar: GANDI SAS > Registrar IANA ID: 81 > Registrar Abuse Contact Email: abuse(a)support.gandi.net > Registrar Abuse Contact Phone: +33.170377661 > Reseller: > Domain Status: clientTransferProhibited > http://www.icann.org/epp#clientTransferProhibited > Domain Status: > Domain Status: > Domain Status: > Domain Status: > Registry Registrant ID: REDACTED FOR PRIVACY > Registrant Name: REDACTED FOR PRIVACY > Registrant Organization: > Registrant Street: REDACTED FOR PRIVACY > Registrant City: REDACTED FOR PRIVACY > Registrant State/Province: Florida > Registrant Postal Code: REDACTED FOR PRIVACY > Registrant Country: US > Registrant Phone: REDACTED FOR PRIVACY > Registrant Phone Ext: > Registrant Fax: REDACTED FOR PRIVACY > Registrant Fax Ext: > Registrant Email: 393fd6bba52377f8a56fdae18d5e2b45-8987766(a)contact.gandi.net > Registry Admin ID: REDACTED FOR PRIVACY > Admin Name: REDACTED FOR PRIVACY > Admin Organization: REDACTED FOR PRIVACY > Admin Street: REDACTED FOR PRIVACY > Admin City: REDACTED FOR PRIVACY > Admin State/Province: REDACTED FOR PRIVACY > Admin Postal Code: REDACTED FOR PRIVACY > Admin Country: REDACTED FOR PRIVACY > Admin Phone: REDACTED FOR PRIVACY > Admin Phone Ext: > Admin Fax: REDACTED FOR PRIVACY > Admin Fax Ext: > Admin Email: 393fd6bba52377f8a56fdae18d5e2b45-8987766(a)contact.gandi.net > Registry Tech ID: REDACTED FOR PRIVACY > Tech Name: REDACTED FOR PRIVACY > Tech Organization: REDACTED FOR PRIVACY > Tech Street: REDACTED FOR PRIVACY > Tech City: REDACTED FOR PRIVACY > Tech State/Province: REDACTED FOR PRIVACY > Tech Postal Code: REDACTED FOR PRIVACY > Tech Country: REDACTED FOR PRIVACY > Tech Phone: REDACTED FOR PRIVACY > Tech Phone Ext: > Tech Fax: REDACTED FOR PRIVACY > Tech Fax Ext: > Tech Email: 393fd6bba52377f8a56fdae18d5e2b45-8987766(a)contact.gandi.net > Name Server: NS-157-A.GANDI.NET > Name Server: NS-66-B.GANDI.NET > Name Server: NS-236-C.GANDI.NET > Name Server: > Name Server: > Name Server: > Name Server: > Name Server: > Name Server: > Name Server: > DNSSEC: Unsigned > URL of the ICANN WHOIS Data Problem Reporting System: > http://wdprs.internic.net/ > >>> Last update of WHOIS database: 2018-12-26T13:36:00Z <<< > > For more information on Whois status codes, please visit > https://www.icann.org/epp > > Reseller Email: > Reseller URL: > > Personal data access and use are governed by French law, any use for the > purpose of unsolicited mass commercial advertising as well as any mass or > automated inquiries (for any intent other than the registration or > modification of a domain name) are strictly forbidden. Copy of whole or part > of our database without Gandi's endorsement is strictly forbidden. > A dispute over the ownership of a domain name may be subject to the > alternate procedure established by the Registry in question or brought > before the courts. > For additional information, please contact us via the following form: > https://www.gandi.net/support/contacter/mail/ > > -----Original Message----- > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On > Behalf Of David McGough > Sent: Wednesday, December 26, 2018 8:19 AM > To: Users of Asterisk app_rpt > Subject: Re: [App_rpt-users] Allstar Node > > > Yeah, Like me! Have a look at: > > > http://kb4fxc.com > http://kb4fxc.net > http://kb4fxc.org > > > Typical behavior of Bryan, W9CR, the blooming idiot! This is the same > behavior he uses against anybody who he passionately dislikes. He starts a > ugly disinformation campaign. Take the Florida Repeater council, as > another example: > > http://frcreform.org/ > > > Well, the old saying that applies is simple: Give a fool enough rope and > they'll hang themselves. > > W9CR's comments on Reddit about ham radio: "It's now a hobby full > of Luddites, racists, and narcissists" just show what a hypocrite he is. > > So, if you, too, are one of the "lucky ones" who W9CR has posted LIBELOUS > content about, send me a personal e-mail. I would like to discuss the > situation with you. > > > W9CR is damaged goods. > > > > 73, David KB4FXC > > > > > > On Wed, 26 Dec 2018, Mike Besemer wrote: > > > Careful Larry... cross the wrong guy and you could end up with a website > registered against your callsign linked to a porn site. > > > > > > > > -----Original Message----- > > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] > On Behalf Of larry > > Sent: Wednesday, December 26, 2018 3:33 AM > > To: app_rpt-users(a)lists.allstarlink.org > > Subject: Re: [App_rpt-users] Allstar Node > > > > Bryan, > > > > I try to refrain from posting to the negative stuff on the email lists. > > However I must say every time someone makes a post and the word Hamvoip > > happens to appear in their post you have to follow up with some negative > > BS that has nothing to do with the original posting. Nor is it helpful > > to the poster. Frankly you do more harm than good with all the negative > > comments while trying to promote ASL. I am sure I am not the only one > > that wishes you would take your rant someplace else. It's gotten REAL > > OLD!!! With all your knowledge and ability the help you do provide when > > the Hamvoip word DOES NOT appear in a posting is excellent. How about > > take your personal rant elsewhere? > > > > Larry - N7FM > > > > > > On 12/25/18 9:57 PM, Bryan Fields wrote: > > > On 12/26/18 12:05 AM, Russell Thomas wrote: > > >> However, I bought a Yellow box from George WB3DZZ. He has taken those > BF > > >> radios apart and made his connections to that and the sound cards his > nodes > > >> also come with the HamVoip software. > > > I'd caution anyone from selling pirated software, as it's criminal > copyright > > > infringement. I'd hate to see people unknowingly caught up in it. > > > > > > 73's > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > ------------------------------ Message: 5 Date: Wed, 26 Dec 2018 08:55:09 -0500 From: Bryan Fields <Bryan(a)bryanfields.net> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <12b9ffdb-ceee-95ae-298a-2752ea3b449c(a)bryanfields.net> Content-Type: text/plain; charset=utf-8 On 12/26/18 8:19 AM, David McGough wrote: > W9CR's comments on Reddit about ham radio: "It's now a hobby full > of Luddites, racists, and narcissists" just show what a hypocrite he is. It's not libel if it's true, and in your case is most certainly is. You are a fraud and a criminal. We will not rest until you are exposed for what you are and your theft is exposed for all the world to see. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net ------------------------------ Message: 6 Date: Wed, 26 Dec 2018 09:04:54 -0500 (EST) From: David McGough <kb4fxc(a)inttek.net> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <Pine.LNX.4.44.1812260857330.3827-100000(a)goliath.inttek.net> Content-Type: TEXT/PLAIN; charset=US-ASCII "WE" ???? Yet another, typical delutional outburst. Dude, you're already up to your neck in quicksand. And, you're right, all the world sees this, except you. On Wed, 26 Dec 2018, Bryan Fields wrote: > On 12/26/18 8:19 AM, David McGough wrote: > > W9CR's comments on Reddit about ham radio: "It's now a hobby full > > of Luddites, racists, and narcissists" just show what a hypocrite he is. > > It's not libel if it's true, and in your case is most certainly is. You are a > fraud and a criminal. We will not rest until you are exposed for what you are > and your theft is exposed for all the world to see. > > ------------------------------ Message: 7 Date: Wed, 26 Dec 2018 11:56:07 -0500 From: "Mike Besemer" <mwbesemer(a)cox.net> To: "'Users of Asterisk app_rpt'" <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <001501d49d3b$e8593a20$b90bae60$(a)cox.net> Content-Type: text/plain; charset="us-ascii" So you've file a lawsuit? -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bryan Fields Sent: Wednesday, December 26, 2018 8:55 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] Allstar Node On 12/26/18 8:19 AM, David McGough wrote: > W9CR's comments on Reddit about ham radio: "It's now a hobby full > of Luddites, racists, and narcissists" just show what a hypocrite he is. It's not libel if it's true, and in your case is most certainly is. You are a fraud and a criminal. We will not rest until you are exposed for what you are and your theft is exposed for all the world to see. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 8 Date: Wed, 26 Dec 2018 12:08:19 -0500 From: EDPnJAX <edpnjax(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <53DEF23A-3556-4C37-B942-ACE2A78CF9A9(a)gmail.com> Content-Type: text/plain; charset=utf-8 Let it go guys? ALL of you! This isn?t productive, in fact it?s destructive. The list isn?t meant for this junk. > On Dec 26, 2018, at 11:56 AM, Mike Besemer <mwbesemer(a)cox.net> wrote: > > So you've file a lawsuit? > > > > -----Original Message----- > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On > Behalf Of Bryan Fields > Sent: Wednesday, December 26, 2018 8:55 AM > To: Users of Asterisk app_rpt > Subject: Re: [App_rpt-users] Allstar Node > > On 12/26/18 8:19 AM, David McGough wrote: >> W9CR's comments on Reddit about ham radio: "It's now a hobby full >> of Luddites, racists, and narcissists" just show what a hypocrite he is. > > It's not libel if it's true, and in your case is most certainly is. You are > a > fraud and a criminal. We will not rest until you are exposed for what you > are > and your theft is exposed for all the world to see. > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 9 Date: Wed, 26 Dec 2018 12:35:15 -0500 (EST) From: David McGough <kb4fxc(a)inttek.net> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <Pine.LNX.4.44.1812261233400.3827-100000(a)goliath.inttek.net> Content-Type: TEXT/PLAIN; charset=ISO-8859-1 Well, if you were the subject of an aggressive personal attack from an Internet Bully, you might feel differently. On Wed, 26 Dec 2018, EDPnJAX wrote: > Let it go guys??? ALL of you! This isn???t productive, in fact it???s destructive. The list isn???t meant for this junk. > On Dec 26, 2018, at 11:56 AM, Mike Besemer <mwbesemer(a)cox.net> wrote: > > So you've file a lawsuit? > > > > -----Original Message----- > From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On > Behalf Of Bryan Fields > Sent: Wednesday, December 26, 2018 8:55 AM > To: Users of Asterisk app_rpt > Subject: Re: [App_rpt-users] Allstar Node > > On 12/26/18 8:19 AM, David McGough wrote: >> W9CR's comments on Reddit about ham radio: "It's now a hobby full >> of Luddites, racists, and narcissists" just show what a hypocrite he is. > > It's not libel if it's true, and in your case is most certainly is. You are > a > fraud and a criminal. We will not rest until you are exposed for what you > are > and your theft is exposed for all the world to see. > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 10 Date: Wed, 26 Dec 2018 12:38:04 -0500 From: EDPnJAX <edpnjax(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <0726E0CE-A565-4A76-A765-E1A3D6B86A84(a)gmail.com> Content-Type: text/plain; charset=utf-8 I have been, and just like most everything else in life? ignore it and when they don?t get anything in return they will eventually go away. Like a stray? keep feeding themguys and they?ll return. > On Dec 26, 2018, at 12:35 PM, David McGough <kb4fxc(a)inttek.net> wrote: > > > Well, if you were the subject of an aggressive personal attack from an > Internet Bully, you might feel differently. > > > > On Wed, 26 Dec 2018, EDPnJAX wrote: > >> Let it go guys?? ALL of you! > > This isn't??t productive, in fact it's??s destructive. The list isn't??t meant for this junk. > >> On Dec 26, 2018, at 11:56 AM, Mike Besemer <mwbesemer(a)cox.net> wrote: >> >> So you've file a lawsuit? >> >> >> >> -----Original Message----- >> From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On >> Behalf Of Bryan Fields >> Sent: Wednesday, December 26, 2018 8:55 AM >> To: Users of Asterisk app_rpt >> Subject: Re: [App_rpt-users] Allstar Node >> >> On 12/26/18 8:19 AM, David McGough wrote: >>> W9CR's comments on Reddit about ham radio: "It's now a hobby full >>> of Luddites, racists, and narcissists" just show what a hypocrite he is. >> >> It's not libel if it's true, and in your case is most certainly is. You are >> a >> fraud and a criminal. We will not rest until you are exposed for what you >> are >> and your theft is exposed for all the world to see. >> >> -- >> Bryan Fields >> >> 727-409-1194 - Voice >> http://bryanfields.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 11 Date: Wed, 26 Dec 2018 10:44:37 -0700 (MST) From: Willem Schreuder <willem(a)prinmath.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <alpine.DEB.2.21.1812261000250.17951(a)baloo.prinmath.com> Content-Type: text/plain; charset=US-ASCII; format=flowed On Wed, 26 Dec 2018, Mike Besemer wrote: > So you've file a lawsuit? I am always surpized how many hams embrace the self-policing for amateur radio, but fail to see the similarities with the GNU Public License (GPL) for software. We as hams have the public trust for billions of dollars worth of spectrum. However, this comes with strings attached, in that we must promote and expand radio technology, and abide by certain rules. So when there are people who jam some nets, or use the spectrum inappropriately, WE take action to address it. Only in the most eggregious of cases does the FCC actually have to take an enforcement action. Just so with the GPL. I as a software developer have the benefit of billions of dollars worth of free software - a free compiler, a free operating system, and yes Jim Dixon's amazing work on Asterisk, all of which is covered by the GPL. Generally the software community self-enforces the GPL, and in the vast majority of cases, it is as simple as releasing the code. I do this because it is my obligation under the GPL, but I also license new work under the GPL because other people help improve what I started, and I still largely get the credit for it. Had the authors of Asterisk said: "We will not release the source code, but we will do a fantastic job in making sure Asterisk does all the things you want it to do", then Asterisk would have remain a telephone system. Only because they released the source code were hams able to extend it to do repeater linking. Only in rare cases where people continue to flaunt the GPL does it take a lawsuit to compel compliance, and these rarely go to trial because the cost of compliance is so trivial - just release the source code and you are in compliance! However, just like it sometimes takes the FCC to make sure that people comply with the conditions of their ham license, sometimes it takes legal action to force compliance with the GPL. In the end the GPL (just like our ham priviliges) is a social contract. We are granted an enormously valuable resource on the understanding that we will abide by a simple rule: you have to make your contribution freely available to others. So I sure hope that this doesn't turn into a lawsuit. That only serves to make lawyers rich. But in the end, it seems to me that the open source model has proven to be much more successful in the long run. I and many others have been able to make a decent living despite making our software available not just free of charge but free to improve. And in the process I have benefitted both in terms of getting credit for my contributions as well as well as from the clever things others have contributed to software I wrote. We don't have to be ugly about it and call people names. But the GPL is pretty black and white about the issue of releasing the source code. I don't know of a single case where somebody has eventually prevailed in arguing that you can start with GPL code and then refuse to release the source for the improvements. The GPL always wins out in the end. -Willem ================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder(a)prinmath.com ------------------------------ Message: 12 Date: Wed, 26 Dec 2018 12:45:54 -0500 From: "Bryan D. Boyle" <bdboyle(a)bdboyle.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Allstar Node Message-ID: <DDA734ED-3E9A-4FEE-A901-A0FCF41DFEE2(a)bdboyle.com> Content-Type: text/plain; charset="utf-8" AMEN. It?s only AMATEUR radio. If it disappeared tomorrow, the world would neither be better nor worse off, in truth. If the legal and moral owners of the copyrights have no inclination to fight it or enforce their rights, in the end, does it really matter what anyone who has no rights to the software thinks? Both versions of the fork have plusses and minuses. In the end, the marketplace will decide. But in the meantime, all the constant bickering and ?who?s is bigger? argument is doing is ABSOLUTELY NOTHING. It?s just a hobby. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message. > On Dec 26, 2018, at 12:08, EDPnJAX <edpnjax(a)gmail.com> wrote: > > Let it go guys? ALL of you! > > This isn?t productive, in fact it?s destructive. The list isn?t meant for this junk. > >> On Dec 26, 2018, at 11:56 AM, Mike Besemer <mwbesemer(a)cox.net> wrote: >> >> So you've file a lawsuit? >> >> >> >> -----Original Message----- >> From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On >> Behalf Of Bryan Fields >> Sent: Wednesday, December 26, 2018 8:55 AM >> To: Users of Asterisk app_rpt >> Subject: Re: [App_rpt-users] Allstar Node >> >>> On 12/26/18 8:19 AM, David McGough wrote: >>> W9CR's comments on Reddit about ham radio: "It's now a hobby full >>> of Luddites, racists, and narcissists" just show what a hypocrite he is. >> >> It's not libel if it's true, and in your case is most certainly is. You are >> a >> fraud and a criminal. We will not rest until you are exposed for what you >> are >> and your theft is exposed for all the world to see. >> >> -- >> Bryan Fields >> >> 727-409-1194 - Voice >> http://bryanfields.net >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@l

1 0

Echolink...got it working...
by George Csahanin 27 Dec '18

27 Dec '18

Loaded new style modules.conf (still didn't work) then went back to my original modules file with a load statement for echolink and it worked. Then again at the same time I changed the email address in the echolink.conf file...,aybe that was it Thanks anyhow. Now to figure why Allmon stopped on the same node. GeorgeC W2DB -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

1 0