April 2018 - App_rpt-users - lists.keekles.org

Connect multiple SIP or IAX clients to a node
by 2E0SIP 12 Apr '18

12 Apr '18

Hi All I currently have an issue where by if a SIP client has 'dialled' into a node and another SIP client then dials in, the first call is terminated with a BYE. The logs, even with full debugging enabled, don't really reveal why this is occurring. Someone else in a Facebook group reported the same issue with an IAX client. Here's the context the SIP clients get dropped into: [sip-client] exten => ${NODE},1,Answer exten => ${NODE},n,Set(NODENUM=${CALLERID(number)}) exten => ${NODE},n,Set(CALLERID(num)=0) exten => ${NODE},n,Rpt,${NODE}|Pv|${CALLERID(name)} exten => ${NODE},n,Hangup exten => ${NODE},n(hangit),Answer exten => ${NODE},n(hangit),Wait(1) exten => ${NODE},n(hangit),Hangup Does anyone have any idea why this can only support a single connected client? Thanks Matthew 2E0SIP

2 2

Problems with setup from newest image
by Jeremy Utley 12 Apr '18

12 Apr '18

So last week while I was on vacation, I had an SD card filesystem go corrupt - lots of damaged files, Asterisk segfaulting on startup, all kinds of weird stuff happening. So I decided to rebuild this node (45984) with the newest stuff - this was my last Arch-based node, and I wanted to get back to the Debian base. So, I pulled down the 20180228 raspbian stretch image, wrote it to a new SD card, booted up the Pi, ssh'd in, expanded the filesystem, updated all packages to latest, and went thru the setup process. BTW, I love the new menu-based system - but the menu should include a way to get out to shell (if it does already, I apologize, but I did not see an option for that in it). After I did the node setup, and the pi rebooted, I'm getting odd errors from trying to start Asterisk. Here's an entry from journalctl: Apr 11 16:14:33 uhf.wi0la.org systemd[1]: asterisk.service: Job asterisk.service/start failed with result 'dependency'. Apr 11 16:14:33 uhf.wi0la.org systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseudo.device/start failed with result 'timeout'. I'm suspecting that the upgrade of the kernel I did on the first boot is making Dahdi not come up properly, so I'm trying a rebuild of Dahdi via: apt-get install --reinstall asl-dahdi-linux-dkms Don't know if this will fix the problem or not - will know as soon as the process finishes. But isn't DKMS supposed to handle this automatically? Jeremy, NQ0M

1 2

Re: [App_rpt-users] Static IP
by John Rudolph- N2YP 12 Apr '18

12 Apr '18

I had some issues like this in the beginning as well but it included any changes made to my conf files and it ended up being because the image didn't install correctly because I was trying to reuse a DVD. With that said I do have everything working now except the menu for changing the system name and using the menu to install webmin. I have since installed it maunally after many attempts automatically. I should have been a bit clearer in describing my problem. I am trying to use the install menu asl-menu.I follow the menu prompts enter the info, highlight Save and hit ok . it seems to go but does not change, the same happens if i try to change the name from repeater to something else. All the install info Node number , my call and password entered ok, the box will connect and register but I am unable to change from DHCP to Static.I tried using both the root log i and the repeater log in from the console with the same results. ThanksCharlie WB2SNN John Rudolph Amateur Radio Op N2YP Unadilla,NY

2 1

Re: [App_rpt-users] streaming node issues
by Bryan Fields 11 Apr '18

11 Apr '18

On 4/11/18 8:58 AM, David Waters wrote: > Bryanhere is what we have this used to work but now it puts us into a > sterad transmitt mode on our radio attached to node. we have startup line > commented out at present, > > Command line to startstream: outstreamcmd=/bin/sh,-c,/usr/bin/lame > > --preset cbr 16 -r -mm -s 8 --bitwidth 16 - - 2> /tmp/stream.status | > > /usr/bin/ezstream -qvc/etc/ezstream.xml <snip> > -bash: --preset:command not found This is command from the shell saying it's trying to execute the one of the flags to lame, rather than pass it to lame on the command line. You have something wrong with your command, perhaps it's in quoted properly or you have a CR/LF in it's place. I've replied to the list so we all can benefit from this, and yahoo is not allowing emails again. -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

3 2

Install Allstarlink on Debian 9 VPS
by Monty 11 Apr '18

11 Apr '18

Hello All, I'm trying to install the allstarlink package on my Debian VPS. I followed the instructions on the wiki: cd /tmp wget https://github.com/AllStarLink/Asterisk/raw/develop/allstar/repository/inst… chmod +x install-repository ./install-repository If Raspbian: apt-get install raspberrypi-kernel-headers -y Otherwise: apt-get install linux-headers-`uname -r` -y apt-get update apt-get install allstarlink -y I did get an error on the *linux-headers* command. I installed what I believe is the latest headers from apt-get (4.9.0-6-amd64). Asterisk is not able to run, and I'm getting the following messages in the *CLI *when I run asterisk manually: [Apr 6 16:05:35] WARNING[14976]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 28615 [Apr 6 16:05:35] WARNING[15001]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Apr 6 16:05:35] ERROR[15001]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory Seems to be dahdi is missing. Any ideas how to remedy? I have tried to* recompile Dahdi *from: http://wiki.allstarlink.org/wiki/DAHDI_Make After running the "*make*" command I get the following: "*You do not appear to have the sources for the 2.6.32-042stab127.2 kernel installed.*" I can't seem to find how to update/install *2.6.32-042stab127.2 kernel*. Monty KE7JVX

8 16

GPIO to trigger alarms
by Greg 10 Apr '18

10 Apr '18

Is there any info on using GPIO or serial pins with dry contact switches to call scripts to say TX an audio file as an alert? Thanks Greg

1 0

Static IP Config
by CHARLES BENN 10 Apr '18

10 Apr '18

I loaded the new image and did the original set up with DHCP.I log on to the Console using root enter the info using the ASL-Menu and save it but the IP remains DHCP.After hitting OK there is a quick flash of some info at the bottom of the screen but its is gone before I can read it. Any suggestions73 Charlie WB2SNN 27904-27908

4 5

Static IP Config
by CHARLES BENN 10 Apr '18

10 Apr '18

I should have been a bit clearer in describing my problem. I am trying to use the install menu asl-menu.I follow the menu prompts enter the info, highlight Save and hit ok . it seems to go but does not change, the same happens if i try to change the name from repeater to something else. All the install info Node number , my call and password entered ok, the box will connect and register but I am unable to change from DHCP to Static.I tried using both the root log i and the repeater log in from the console with the same results. ThanksCharlie WB2SNN

3 2

Briadcastify
by David Waters 10 Apr '18

10 Apr '18

I was streaming my node’s audio to scanners using broadcastify. It quit working 4 days ago. Everything is the same all files and config files to run it are in my node but it will not stream audio. I try to start it manually and I get error file not found. But as I said all files and directories are there. All files match what they were before when it worked, but it doesn’t work. I tried to download the files needed again but I can not because it says files are in my node. I am at a loss not sure where to go. I don’t know how to remove all files from node to start over. Looking for serious help. AB3MZ David Waters

3 2

USB hubs
by John Rudolph- N2YP 06 Apr '18

06 Apr '18

Has anyone successfully used a USB hub for multiple nodes? If so what model have you used? Do we still need to locate a multi TT hub or do the newer usb 3.0 hubs work fine? John Rudolph Amateur Radio Op N2YP Unadilla,NY

3 2