April 2018 - App_rpt-users - lists.keekles.org

problem starting asterisk with latest image
by George J Csahanin 23 Apr '18

23 Apr '18

Have it all installed on a Pi-Zero and linux boots fine, wifi connects fine, asterisk shows "segmentation fault" and in the log files: /Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Service hold-off time over, scheduling restart.// //Apr 23 03:24:20 repeater systemd[1]: Stopped Asterisk PBX and telephony daemon.// //Apr 23 03:24:20 repeater systemd[1]: Started Asterisk PBX and telephony daemon.// //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Main process exited, code=killed, status=11/SEGV// //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Control process exited, code=killed status=11// //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Unit entered failed state.// //Apr 23 03:24:20 repeater systemd[1]: asterisk.service: Failed with result 'signal'./ This repeats many times. Really not sure where to start looking. I used ldd to see if libraries were ok, and all was fine: /repeater@repeater:/var/log $ ldd /usr/sbin/asterisk// // /usr/lib/arm-linux-gnueabihf/libarmmem.so (0xb6f5b000)// // libdl.so.2 => /lib/arm-linux-gnueabihf/libdl.so.2 (0xb6f48000)// // libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0xb6f1f000)// // libtinfo.so.5 => /lib/arm-linux-gnueabihf/libtinfo.so.5 (0xb6ef0000)// // libm.so.6 => /lib/arm-linux-gnueabihf/libm.so.6 (0xb6e71000)// // libresolv.so.2 => /lib/arm-linux-gnueabihf/libresolv.so.2 (0xb6e4c000)// // libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0xb6d0d000)// // /lib/ld-linux-armhf.so.3 (0xb6f71000)// //repeater@repeater:/var/log $ / Anybody have any suggestions? GeorgeC W2DB 2360, 28599

2 1

Feature Announcement - -"New" audio filters for AllStarLink Asterisk
by Kevin Custer 23 Apr '18

23 Apr '18

Feature Announcement: One of the new features of AllStarLink Asterisk V1.01 is the addition of selectable audio filters. These filters are for those who want even more fidelity over both the local repeat and network channel paths. The filter rules were developed by Jeff DePolo WN3A, and were originally available in the Xelatec XIPAR release. These filters are now standard, and were installed into AllStarLink Asterisk starting with V1.01. To learn more, and take advantage of these new filters, please visit the AllStarLink Wiki. <http://wiki.allstarlink.org/wiki/Audio_Filters> For AllStarLink Inc., Kevin - W3KKC

1 0

Echolink Node ID prefixes
by 2E0SIP 23 Apr '18

23 Apr '18

Hi All, I've noticed when an Echolink node connects / transmits to an AllStar node, the Echolink node number is prefixed with a 3 in the archive file and possibly elsewhere. Does the '3' represent anything? I was wondering if Repeaters / Links / Users have a different prefix. Thanks Matthew 2E0SIP

2 1

Can't link to AWS hosted AllStar Hub
by BOB MEYER 23 Apr '18

23 Apr '18

Hi all: I'm new to the list, but have been working for awhile with AllStar nodes. I'm trying to set up a virtual PC hub on Amazon's AWS for several of us to link to, but get a "connection failed" audio announcement when I attempt to connect from one of our other nodes. I can log in to the hub, go to the CLI prompt and connect to other nodes from it just fine using "rpt fun <mynode> *3<other node>". The udp port 4569 has been defined to accept connections from 0.0.0.0/0, ::/0 . It appears to be registered properly and the update node list is running. One of the FAQs indicates there may be a need to have the port set manually on the registration server. The node is question is 47527. I'm running ASL version: GIT 004b9dd built by root @ stretch-64 on a x86_64 running Linux on 2018-03-01 18:39:13 UTC If it is an issue with Amazon's AWS, and there is another VPS that does work, I'm not opposed to switching. I really like AllStar, and have put together some scripts and an Arduino to monitor heatsink temperatures and battery voltage on our radio-based nodes, and then announce the info on them when prompted. It is a fun and flexible system. Kudos to all involved in the design and ongoing development/support! Many thanks in advance for any guidance, Bob Meyer KF5TVG

3 2

Pi versions...and Allstar (Pi-Zero
by George Csahanin 21 Apr '18

21 Apr '18

Does this new release work on a Pi-Zero? GeorgeC W2DB 2360, 2428, 28599 -- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel

1 0

WinSCP root login
by lengriff＠optimum.net 21 Apr '18

21 Apr '18

I have added a password for root login, and in sshd_config changed to PermitRootLogin yes. I can login as root locally with the correct password, but WinSCP says ' access denied '. The auth.log shows: sshd[1643]: Pam_Unix(sshd:auth): authentication failure; logname= uid=0 euid=0 TTY=ssh ruser= rhost=192.168.39.121 user=root Len WB2HKK

3 2

Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
by K5CG 20 Apr '18

20 Apr '18

The new hub node is online and connected but I was unable to run dahdi_test root@hub:/usr/sbin# ls -la dahdi_test -rwxr-xr-x 1 root root 6416 Mar 1 12:26 dahdi_test It's right there^ root@hub:/usr/sbin# ./dahdi_test -c 100 -bash: ./dahdi_test: No such file or directory As it happens I installed it as 64 bit and dahdi_test is a 32 bit executable. root@hub:/usr/sbin# file dahdi_test dahdi_test: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux.so.2, for GNU/Linux 2.6.32, BuildID[sha1]=2f93def536fd49566dde40b7f02bcf25072fdaa8, stripped So I needed to install libc6-i386 apt-get install libc6-i386 Now dadhi_test is worrking. Best: 100.000% -- Worst: 99.214% -- Average: 99.617351% Cumulative Accuracy (not per pass): 99.998 Danny K5CG From: "Nate Hardman" <nhardman1428(a)gmail.com> To: "Users of Asterisk app_rpt" <app_rpt-users(a)lists.allstarlink.org> Sent: Saturday, March 24, 2018 1:39:17 PM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 bug fixed in net-setup scripts if ran multiple times On Sat, Mar 24, 2018 at 2:23 PM, K5CG < [ mailto:k5cg@hamoperator.org | k5cg(a)hamoperator.org ] > wrote: After some reading I got the networking up. systemctl stop ifup(a)eth0.service systemctl start ifup(a)eth0.service I can ping out to the Internet and apt-get update apt-get upgrade -y No updates were applied however. My node appears online now on the status page! WOOT! I'll update hostname, domain name etc manually now. If there are updates to the build, I don't mind starting over to test it. VMs are quick and easy to rebuild. Danny K5CG ----- Original Message ----- From: "Steve Zingman" < [ mailto:szingman@msgstor.com | szingman(a)msgstor.com ] > To: "Users of Asterisk app_rpt" < [ mailto:app_rpt-users@lists.allstarlink.org | app_rpt-users(a)lists.allstarlink.org ] >, "k5cg" < [ mailto:k5cg@hamoperator.org | k5cg(a)hamoperator.org ] > Sent: Saturday, March 24, 2018 11:35:28 AM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 Danny, I'm copying Nate on this so he can comment on the ASL menu issue. One suggestion is as root: apt-get update apt-get upgrade -y I have pushed a update to the menus Steve On 03/24/2018 12:30 PM, K5CG wrote: > I have a question about installation of this build. > > I downloaded ASL_1.01-20180228-amd64-i386-debian-stretch-netinst.zip, and used the iso to build a virtual machine on Xenserver 7.2 (for a hub). > > The asl-menu appears to fail to set hostname, domain name, network parameters, just about anything, even running it as root. After rebooting, the hostname and domain name are not changed, there is no configured networking. > > Looking in /etc/network/interfaces there are many instances of my static IP, mask and gateway (a complete set for every time I ran the network setup from asl-menu). > > /etc/systemd/network/ is empty. > /etc/resolv.conf has correct information in it. > > systemctl start network.service > Failed to start network.service. network.service not found. > > rpt.conf looks like it was saved with my new node info and the Timezone update was successful. > > I've probably missed something so feel free to correct me, please. > > Danny > K5CG > > ----- Original Message ----- > From: "Greg Noneman" < [ mailto:gregn1@cox.net | gregn1(a)cox.net ] > > To: "Users of Asterisk app_rpt" < [ mailto:app_rpt-users@lists.allstarlink.org | app_rpt-users(a)lists.allstarlink.org ] > > Sent: Friday, March 23, 2018 5:58:02 PM > Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 > > Steve, > > I have a question about the installation/update of AllStarLink Asterisk version 1.01 that I don’t believe the ReadMe file addressed (pardon me if I missed it). I have both Intel/AMD and RPi installations that are currently running DIAL. Is there any simple/effective way to “automatically" upgrade tp ASLA 1.01, or is it necessary to back up my config files, perform a new clean install, and then restore my configs? > > > Thanks, > Greg > WB6ZSU > >> On Mar 18, 2018, at 3:08 PM, Steve Zingman < [ mailto:szingman@msgstor.com | szingman(a)msgstor.com ] > wrote: >> >> We are happy to announce AllStarLink Asterisk version 1.01. This updated version contains a number of bug fixes and enhancements. The method used for installing and upgrading AllStarLink Asterisk has been changed from building from source code to simply install and upgrade the programs that make up AllStarLink Asterisk. AllStarLink Asterisk is now using the same update method any other Debian program has used for years. The package management system is called APT (acronym for Advanced Package Tool). APT is a set of tools for managing Debian packages, and therefore the applications installed on your Debian system. >> >> The link on [ http://allstarlink.org/ | allstarlink.org ] and the wiki < [ http://wiki.allstarlink.org/ | wiki.allstarlink.org ] > Now point to the new images for x86/AMD and Raspberry Pi. >> >> < [ http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/ASL_1.01-20180228-am… | http://dvswitch.org/files/ASL_Images/Intel-AMD/Stretch/ASL_1.01-20180228-am… ] > >> < [ http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… | http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… ] > >> >> The repository of AllStarLink Images is located at < [ http://dvswitch.org/files/ASL_Images/ | http://dvswitch.org/files/ASL_Images/ ] > >> >> For a more complete explanation of the changes to AllStarLink Asterisk see < [ http://dvswitch.org/files/ASL_Images/readme.txt | http://dvswitch.org/files/ASL_Images/readme.txt ] > >> >> 73, Steve N4IRS >> _______________________________________________ >> App_rpt-users mailing list >> [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users(a)lists.allstarlink.org ] >> [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] >> >> To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users(a)lists.allstarlink.org ] > [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] > > To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users(a)lists.allstarlink.org ] > [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] > > To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users(a)lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Nathan Hardman [ mailto:nhardman1428@gmail.com | nhardman1428(a)gmail.com ] [ mailto:N8THN@ARRL.NET | N8THN(a)ARRL.NET ] _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 3

EchoLink Server Stuck On
by Bob Pyke 20 Apr '18

20 Apr '18

EchoLink on our repeater is confused, and we are trying to reset. The EchoLink module has been in a “noload” state for over two days now, and the EchoLink website still shows our node as being a valid login. I’ve sent a service request in to EchoLink without response. My question is this, do I need to do more than “noload” the EchoLink module so the EchoLink server won’t see us as a login? Thanks, Bob K6ECM Sent from iPad

3 6

Very strange problem with DIAL + USB URIs.
by John Locke 19 Apr '18

19 Apr '18

Hi, I have a very strange problem with DIAL + USB URIs. I get choppy audio after a couple of days or maybe several hours of constant use. Restarting asterisk or even the PC wont solve the problem. The problem only goes away if I connect the URI to another USB or shut down the PC for several hours. Maybe some temperature problem on the USB card?? I'm using a standard PC (i5 + 8GB) with 2 USB URIs. To test the problem I connected a tone generator to the URIs. These are some examples of the saved audio files in asterisk: Normal After several hours after one day Some advice would be very appreciated Thanks in advance Best Regards John

3 3

Re: [App_rpt-users] Whose Voice in Sound Files?
by Users of Asterisk app_rpt 18 Apr '18

18 Apr '18

Allison Smith. Look her up on Wikipedia, Allison Smith the voice of Asterisk Sent from my T-Mobile 4G LTE device ------ Original message------From: Users of Asterisk app_rpt Date: Tue, Apr 17, 2018 9:12 PMTo: app_rpt-users(a)lists.allstarlink.org;Cc: Subject:[App_rpt-users] Whose Voice in Sound Files? Whose Voice is recorded in the new Sound Files? Thanks,BobK6ECM73

2 1