July 2018 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] iaxrpt
by John Rudolph- N2YP 20 Jul '18

20 Jul '18

The problem connecting to iaxrpt is an invisible character in the iax.conf stanza. It does not show up with programs like notepad++ ect. If you manually retype a stanza it works fine. I had it isolated to two lines near the top but forget which two and never got it down to a single line. It was in Dial, HamVOIP, and ASL 1.01. John Rudolph Amateur Radio Op N2YP Unadilla,NY

3 4

IAX stream data
by Mike 19 Jul '18

19 Jul '18

Does anyone know if there has been a change in what is transmitted in the iax stream from APP_RPT from the time of ACID to the CURRENT ASL or is it exactly the same ? Can you throw me a bone ? ...research, I will explain later. Thanks, ...mike/kb8jnm

2 1

Re: [App_rpt-users] AllStarLink procedure for Raspbian
by qrz＠tg9aor.net 18 Jul '18

18 Jul '18

I apologize if this is not the proper way to continue a thread via email response. Mike: I compiled via a script and the procedure that is within the allstarlink wiki FAQ. It worked on my node 48270 on a Debian 9 VPS. Stacy: By ".Make sure the modules are loaded in and then restart Asterisk." You mean editing the modules.conf and restart asterisk? Thank you both for responding to my question. TG9AOR

2 1

Simplex node problem
by Jay Poulos 18 Jul '18

18 Jul '18

I have a simplex node setup with a Baofeng 888. I receive ok (the periodic automated date and time) but when I transmit a command, I just hear a beep. On the Node Status page the "Total Keyups" increments each time I attempt to send a command. However, the "Total Commands Executed" remains at 0. "Total Timeouts" is also 0. It's as if the command is being received but not interpreted correctly? Any ideas? Thanks, Jay KI7SOX

4 3

Statpost command ? server
by ldrolet＠cgocable.ca 17 Jul '18

17 Jul '18

Hello everyone, I would like to make a server to see our repeater that are linked together, with: ; Statpost_program = / usr / bin / wget -q, - output document = / dev / null ; statpost_url = http: //stats.allstarlink.org/uhandler.php; Status updates can you explain to me how to make a server that will be installed at my home I understand that I have to have a dedicated computer for this server, did you have any experience with these "Statpost" commands on RPT.CONF can any server be mounted on a Raspberry PI 3 for example? Or, I have to have a Windows computer for this server? Which program should I use for this server? etc. Thank you for your help Luc -------------------------------------------------------------------- myhosting.com - Premium Microsoft? Windows? and Linux web and application hosting - https://link.myhosting.com/myhosting

3 2

Lessons being learned...
by Jim Aspinwall No1PC 17 Jul '18

17 Jul '18

... and some 'crow' consumed per prior rant ... (trust me, does not taste like chicken, no matter how much tabasco...) Issues and Challenges Taken Head-On... and some Take-Aways - download and try to 'build' node(s) with prior or latest build- 'bad' supply, new low voltage errors - enjoy the ease of asl-menu- why doesn't it recognize my eth0 and RA-40? We often hear "bad card..." - despite indeed some "bad card" attempts, changing methods allowed 'bad' cards to work. Probably NOT a bad SD card or in my case USB sticks. So far we can't even tell what specs/speed, etc. absolutely will work, absolutely will NOT work, or might work. We don't even know what internal schemes card makers employ in their products. I'm checking out a couple of supposed flash memory device diagnostics to see if anything might be obvious. I'm thinking a full-write and verify utility like h2testw (https://www.heise.de/download/product/h2testw-50539) may help - perhaps as a card 'conditioner' before writing an image to stick. This will not be a short-delivery cycle diversion... - I've variously used Win32DiskImager or Etcher in a wonderful Win10 workstation-class main PC... may be time to re-think that (haven't looked at Rufus, or unetbootin, etc. yet) and either seems to yield various results... but it's not very clear/apparent that various other system disk and USB I/O operations or just how Windows handles all of this. - before firing up a 'proper' Linux system to do all this with, or just use Raspbian on the Pi itself, I dug out my MacBook Air and Applepi-baker... which has proven quite consistent, reliable and happiness through over a dozen 'stick'/card image writes and saving images to reproduce to save time making other new nodes. I know - who just happens to have a 'dusty' MacBook laying about? Point is - is the problem Windows? The box x-nix is running on, or what? Not quite sure. - Bottom-line - unless you have a platform and tool you KNOW works, don't totally shame Windows - not there yet. "It's Your Power Supply..." - no, no it's not, unless/until it IS... whether using a generic USB-wart of 1.5A, *the* accompanying 2.5A 'wart' with many Pi kits, or a PowerWerx USB Buddy 5v 3A DC device ... "low voltage error" still can/has appeared out of nowhere with clean 5.1v into the MicroUSB. I've had no less than 4.93 at the connected RA-40 and 4.96 at the Pi - clean, scoped, flat DC. The Pi should not 'react' until 4.65v. - if we determine, somehow, that there is something imposing noise on the 5v bus or the Pi's internal 3.3v... maybe we can preempt this with a suitably placed add-on filter or two. TBD. "asl-menu didn't work..." - AH-HA! Big thanks to Steve and Nate for sleuthing this one FAST! - First take-away - start fresh - do NOT import any config files from "some other builds" - Yet to be identified, parsed, handled is what the custom/undocumented (?) non-ASL configuration items are... (but certainly there are standard parameter lines we built and want... save those off and bring them in one at a time after you have a good basic working node...) - Even with a fresh start... well, see next point... - It didn't know what to configure for 'eth0' because in some x-nix flavors, and the Pi, 'eth0' does not exist, but 'enxab12cd34ef56' does - the adapter "enx+MACaddress" - I don't know how or if this can be resolved... 'ifconfig' is your friend to get the 'NIC' identity to use for manual IP configuration steps. "Why doesn't Asterisk/rpt see my radio interface device?" - I don't have an answer for this one... back to the "bad SD card" conundrum perhaps... ------------------------------- Once I worked around and through the various challenges, I have established one good working node as a reference platform to clone, reproduce, edit, and deploy as a consistent upgrade for 4+ other nodes in our system. I captured a working image with ApplePi-baker and made 6 additional core working sticks. Onward! The goal is to off-load a handful of $400+ equally-oddly-custom-programmed multi-port controllers to reduce rack space, variables, power consumption... most interfaced with RA-35 or RA-40, and testing a newish comprehensive "pi-hat" out of Canada. I'm still working through a couple of points - mostly "cheat sheet" items to try and contribute yet-another-AllStar-how-to (OMG!) I've got 6-8 others lying about and they are all 'challenging' in many points - too assuming of knowledge of x-nix, paths, logs, scripts, permissions, skipping steps, apt-get, etc. This is a $35 platform 10-year-olds get to work making robots and media servers... we can do this... yes? Back to the rest of my 'crow' and following through. Thanks for listening.

2 1

AllStarLink procedure for Raspbian Stretch
by qrz＠tg9aor.net 15 Jul '18

15 Jul '18

I followed the procedure stated on Question 4 under the AllStarLink Wiki onto my Raspberry Pi 3B+ with Debian Stretch. First signs of deviation from the normal output I saw that, since I had installed the CompassLinux repository to install ambeserver, as I gave the command to install the raspberry pi kernel headers, the kernels had the compass attached to the version numbers of the archives being installed. I configured the node for dahdi/pseudo use. I ran the command asterisk -c to see the initial output, output below. AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47 Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= [ Booting... [ Reading Master Configuration ] [ Initializing Custom Configuration Options ] [Jul 15 22:20:03] NOTICE[25155]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds. [Jul 15 22:20:03] NOTICE[25155]: cdr.c:1416 do_reload: CDR simple logging enabled. [Jul 15 22:20:03] NOTICE[25155]: loader.c:874 load_modules: 55 modules will be loaded. ..............[Jul 15 22:20:03] WARNING[25155]: chan_iax2.c:12750 load_module: Unable to open IAX timing interface: No such file or directory ......................................... ] Asterisk Ready. *CLI> [Jul 15 22:20:04] NOTICE[25161]: app_rpt.c:22184 rpt_master: Normal Repeater Init 48455 [Jul 15 22:20:04] WARNING[25176]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:04] ERROR[25176]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:04] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:04] WARNING[25178]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:04] ERROR[25178]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:06] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:06] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:06] WARNING[25179]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:06] ERROR[25179]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:08] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:09] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:09] WARNING[25181]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:09] ERROR[25181]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:11] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:11] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:11] WARNING[25183]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:11] ERROR[25183]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:13] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:13] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:13] WARNING[25185]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:13] ERROR[25185]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:15] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:15] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:15] WARNING[25187]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:15] ERROR[25187]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:17] ERROR[25161]: app_rpt.c:22223 rpt_master: Continual RPT thread restarts, killing Asterisk I removed the CompassLinux repository, did an update, did another raspberry pi kernel headers install, it all changed to normal version numbers without the Compass suffix/prefix attached to it but output is the same. Do I need to flush everything and start fresh, or is there a procedure for Raspbian Stretch I need to follow? Many thanks. Jose Roberto Ruíz García Salas TG9AOR

3 2

*** Reminder Net This Tues July 17th - OPEN SOURCE ENGINEERING -ASL Pi HotSpots w/ WX8L
by Mike 15 Jul '18

15 Jul '18

*Net Tues July 17th @ 8:30pm EDT ( that's wed July 18th @ 00:30 utc ) * *Connection data final at - www.29999.link* SHOW-N-TELL / OPEN SOURCE ENGINEERING ! Sean, WX8L is Going to chat with us on his "ASL Micro-node/HotSpot " ! You GOTTA Check Out His How-2 Page ! https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html Trying to get others stuff for us all but Shawn is the main attraction and he is eager to answer questions on his ASL Pi Hotspot in our Q&A. Taking questions for the net via email at KB8JNM [at] USWX.mobi or Live during the Net Net will be recorded for playback on 29999 Sunday July 21 @ 5pm edt / 21:00 UTC 2nd test of our playback script (automation).

1 0

OSS Free ASL with URIx
by JJC 15 Jul '18

15 Jul '18

Started a new thread since the old one was hijacked a little bit.. At any rate, I have a current raspbian kernal (without OSS) and I have done the following: 1. disabled onboard audio (just blacklisting the KM for the device) 2. configured ALSA to use the C-Media device (URIx) for default audio 3. installed pulseaudio 4. installed osspd 5. start pulseaudio 6. stard osspd defining --adsp as dsp1 and as a padsp slave 7. start asterisk It's not perfect yet, but I do have ASL receiving audio from the URIx and transmitting audio through the URIx.. it's not clear audio.. maybe audio levels? Also note that there i an osspd-alsa but that doesn't work.. when I try that it causes the usb closed errors that I had posted in the other thread and ASL won't get past that point. Unfortunately the site is far enough away that I can't get to the device and put it on the bench.. a user is reporting that "tones" are what he is hearing after he unkeys If I can figure out the rest I'll be publishing all of the things that need to be edited to 'get-er-done' until then I'll be playing with it... any input/ideas/feedback is welcome!

2 3

iaxrpt running on Android
by Alberto Enrique Puig 14 Jul '18

14 Jul '18

Any news on a fix for iaxrpt running on Android? 73' Alberto KP4AP ________________________________ From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> on behalf of app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Sent: Saturday, July 14, 2018 12:00:01 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 113, Issue 13 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. IAXRPT (Russell Thomas) 2. Re: IAXRPT (Mike) 3. Re: IAXRPT (Russell Thomas) 4. Re: IAXRPT (Mike Besemer - WM4B) 5. AllStarLink News and Updates (AllStarLink Admin Role) 6. Re: OSS Free ASL with URIx (JJC) ---------------------------------------------------------------------- Message: 1 Date: Fri, 13 Jul 2018 11:16:47 -0500 From: Russell Thomas <russell(a)kv4s.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] IAXRPT Message-ID: <CAANUOmHn_KmM1sMVoWSE9AK3Tar9zQdO2LTV6OATDX9dHjE1ew(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Looking for some help setting up IAXPRT on our club's AWS ASL node. I edited the iax.conf and the extensions.conf. I made sure the IAX ports were open on the AWS instance. When I try connecting from the Windows client it says calling and the state has a "?" in it. Eventually it drops out. Any ideas? 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com ------------------------------ Message: 2 Date: Fri, 13 Jul 2018 13:41:22 -0400 From: Mike <mm(a)midnighteng.com> To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] IAXRPT Message-ID: <8e3c1daf-97a5-aa67-913c-b1ecf02f7454(a)midnighteng.com> Content-Type: text/plain; charset=utf-8; format=flowed Well, I'm going to bet you left a set-up set out. Look in your extentions.conf The below works if you define what node, node1 and node2 are [globals] HOMENPA = 330 ; change this to your Area Code NODE = 48396 ; change this to your node number NODE1 = 1999 NODE2 = 1010 NODE3 = 1020 [iaxrpt] exten => ${NODE},1,rpt(${NODE}|X) exten => ${NODE1},1,rpt(${NODE1}|X) exten => ${NODE2},1,rpt(${NODE2}|X) Otherwise define them exact like this [iaxrpt] exten => 48396,1,rpt(48396}|X) I showed both ways since when you look at the default settings in the file, you may see it listed either way. Can be confusing to those that do not know. Just so you understand the difference since the top one has been defined as a variable. Also make sure the 'context' is correct and your password in iax.conf Also, if you are using poerts 4570, or outside the normal/default, you will need to include that in your iaxrpt program connection data 'HOST' for the account like... 192.168.1.222:4570 .That should get you somewhere ! ...mike/kb8jnm On 7/13/2018 12:16 PM, Russell Thomas wrote: > Looking for some help setting up IAXPRT on our club's AWS ASL node. > > I edited the iax.conf and the extensions.conf. I made sure the IAX > ports were open on the AWS instance. > > When I try connecting from the Windows client it says calling and the > state has a "?" in it. Eventually it drops out. > > Any ideas? > > > 73, > Russell Thomas, KV4S > > Cell: 205.202.1701 > DMR: 3101393 > D-Star: KV4S > AllStar: 47923 > EchoLink: KV4S-L (1003254) > HamShackHotline: 614 > Web: http://KV4S.com > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 3 Date: Fri, 13 Jul 2018 12:44:15 -0500 From: Russell Thomas <russell(a)kv4s.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] IAXRPT Message-ID: <CAANUOmGP6bXq2ZzDeAVoi3kG5VWefPLPMu0R_s=cxuxggH-B6g(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Someone called me in regards to the post and after some troubleshooting it appears I didn't need to use special characters in the password. Thanks everyone!! 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm(a)midnighteng.com> wrote: > Well, > > I'm going to bet you left a set-up set out. > > Look in your extentions.conf > > The below works if you define what node, node1 and node2 are > > [globals] > HOMENPA = 330 ; change this to your Area Code > NODE = 48396 ; change this to your node number > NODE1 = 1999 > NODE2 = 1010 > NODE3 = 1020 > > [iaxrpt] > exten => ${NODE},1,rpt(${NODE}|X) > exten => ${NODE1},1,rpt(${NODE1}|X) > exten => ${NODE2},1,rpt(${NODE2}|X) > > > Otherwise > > define them exact like this > > [iaxrpt] > > exten => 48396,1,rpt(48396}|X) > > > I showed both ways since when you look at the default settings in the file, > you may see it listed either way. > > Can be confusing to those that do not know. > > Just so you understand the difference since the top one has been defined as > a variable. > > Also make sure the 'context' is correct and your password in iax.conf > > Also, if you are using poerts 4570, or outside the normal/default, you will > need to include that in your > > iaxrpt program connection data 'HOST' for the account like... > > 192.168.1.222:4570 > > .That should get you somewhere ! > > ...mike/kb8jnm > > > > On 7/13/2018 12:16 PM, Russell Thomas wrote: >> >> Looking for some help setting up IAXPRT on our club's AWS ASL node. >> >> I edited the iax.conf and the extensions.conf. I made sure the IAX >> ports were open on the AWS instance. >> >> When I try connecting from the Windows client it says calling and the >> state has a "?" in it. Eventually it drops out. >> >> Any ideas? >> >> >> 73, >> Russell Thomas, KV4S >> >> Cell: 205.202.1701 >> DMR: 3101393 >> D-Star: KV4S >> AllStar: 47923 >> EchoLink: KV4S-L (1003254) >> HamShackHotline: 614 >> Web: http://KV4S.com >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. ------------------------------ Message: 4 Date: Fri, 13 Jul 2018 17:52:57 +0000 (GMT) From: Mike Besemer - WM4B <mwbesemer(a)cox.net> To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] IAXRPT Message-ID: <2ba8eb.35d2.16494c63e47.Webtop.0(a)cox.net> Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=no Just saw this. I got my butt kicked by that too! Mike WM4B On Fri, Jul 13, 2018 at 1:44 PM, Russell Thomas wrote: > Someone called me in regards to the post and after some > troubleshooting it appears I didn't need to use special characters in > the password. > > Thanks everyone!! > > > 73, > Russell Thomas, KV4S > > Cell: 205.202.1701 > DMR: 3101393 > D-Star: KV4S > AllStar: 47923 > EchoLink: KV4S-L (1003254) > HamShackHotline: 614 > Web: http://KV4S.com > > > On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm(a)midnighteng.com> wrote: >> Well, >> >> I'm going to bet you left a set-up set out. >> >> Look in your extentions.conf >> >> The below works if you define what node, node1 and node2 are >> >> [globals] >> HOMENPA = 330 ; change this to your Area Code >> NODE = 48396 ; change this to your node number >> NODE1 = 1999 >> NODE2 = 1010 >> NODE3 = 1020 >> >> [iaxrpt] >> exten => ${NODE},1,rpt(${NODE}|X) >> exten => ${NODE1},1,rpt(${NODE1}|X) >> exten => ${NODE2},1,rpt(${NODE2}|X) >> >> >> Otherwise >> >> define them exact like this >> >> [iaxrpt] >> >> exten => 48396,1,rpt(48396}|X) >> >> >> I showed both ways since when you look at the default settings in the >> file, >> you may see it listed either way. >> >> Can be confusing to those that do not know. >> >> Just so you understand the difference since the top one has been >> defined as >> a variable. >> >> Also make sure the 'context' is correct and your password in iax.conf >> >> Also, if you are using poerts 4570, or outside the normal/default, >> you will >> need to include that in your >> >> iaxrpt program connection data 'HOST' for the account like... >> >> 192.168.1.222:4570 >> >> .That should get you somewhere ! >> >> ...mike/kb8jnm >> >> >> >> On 7/13/2018 12:16 PM, Russell Thomas wrote: >>> >>> Looking for some help setting up IAXPRT on our club's AWS ASL node. >>> >>> I edited the iax.conf and the extensions.conf. I made sure the IAX >>> ports were open on the AWS instance. >>> >>> When I try connecting from the Windows client it says calling and >>> the >>> state has a "?" in it. Eventually it drops out. >>> >>> Any ideas? >>> >>> >>> 73, >>> Russell Thomas, KV4S >>> >>> Cell: 205.202.1701 >>> DMR: 3101393 >>> D-Star: KV4S >>> AllStar: 47923 >>> EchoLink: KV4S-L (1003254) >>> HamShackHotline: 614 >>> Web: http://KV4S.com >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and >>> scroll down to the bottom of the page. Enter your email address and >>> press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to >>> the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and >> scroll down to the bottom of the page. Enter your email address and >> press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to >> the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem. ------------------------------ Message: 5 Date: Fri, 13 Jul 2018 14:54:25 -0400 From: AllStarLink Admin Role <admin(a)allstarlink.org> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] AllStarLink News and Updates Message-ID: <96f78082-d1b9-a4dc-59e6-74da36d1c436(a)allstarlink.org> Content-Type: text/plain; charset=windows-1252 We here at AllStarLink are not always best at publishing what the organization is up to. There's lots of great things happening, some more visible than others. Below is a bit of what we've been up to since the AllStar project was turned over to us. AllStarLink has assembled team of around a dozen volunteer admin/support experts to troubleshoot any possible AllStar infrastructure problems, process node and user ID requests, improve and bug fix ASL, attempt to keep up with end user support and pay the bills. Our team has identified and fixed every issue which has been brought to our attention. There is always room for improvement and we're continually working to this end. We are improving the current infrastructure to eliminate single points of failure. There are new geo-redundant registration servers in test with a clustered database backend. DNS has been migrated to this cluster of servers and has been running without fail for months. As AllStar supports a diverse userbase; many running older distributions at remote sites who desire stability, our admin team must operate with stability as the highest priority. As such we cannot make sweeping changes to critical network infrastructure without extensive testing. The registration and database servers have uptimes approaching a year, and have been continually available during this time. These servers are responsible for the nodes list, which is distributed to redundant public facing servers and on to users AllStar nodes. Even in the event of an outage during maintenance, the node list simply stops updating for a time. While inconvenient to nodes registering during this window, the vast majority of nodes are still able to link with this older node list. Our admin team has built a new stats server and are working on a new portal. By the way, we have been successfully processing ID and node requests on this new portal for months and have received very positive feedback on its new node list. We added a new node map and performance improvements to the stats server. MediaWiki has been installed with advanced search, a WYSIWYG editor, and other plugins, enabling anyone to create or update documentation. The Drupal site at docs.allstarlink.org is migrating as editors time permits. Our distribution has been updated including ASL 1.01 to run on the latest OS and has many improvements. More improvements are under active development. We're always open to assistance, whether it be design work, admin/support team help, or a completely new feature created by a code contributor. It's easy to get involved at any level. In closing we want to stress that if you have a problem with AllStar servers or want to help out in any way, please let us know by posting to the app_rpt-users list. That's the best way to insure the fastest response. AllStarLink, Inc. Directors: Kevin Custer, W3KKC Pete Elke, WI6H Bryan Fields, W9CR Tim Sawyer, WD6AWP ------------------------------ Message: 6 Date: Fri, 13 Jul 2018 15:45:25 -0600 From: JJC <cummingsj(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] OSS Free ASL with URIx Message-ID: <CAOb75Ot3fFCStUBx1pL_A51Qa4VyB+B+45O+pxvBxWU9imw-uw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Good news, I have made it all work flawlessly! There were a few tweaks that I had to make within pulseaudio in terms of some buffer values and the correct sample rate and boom, I have clean audio now without the use of OSS which means I can have an updated kernel! While there are a few different moving parts, it's actually somewhat trivial.. I'll put together directions if anyone else cares lol... JJC N0PKT On Thu, Jul 12, 2018 at 10:37 PM JJC <cummingsj(a)gmail.com> wrote: > Started a new thread since the old one was hijacked a little bit.. > > At any rate, I have a current raspbian kernal (without OSS) and I have > done the following: > > 1. disabled onboard audio (just blacklisting the KM for the device) > 2. configured ALSA to use the C-Media device (URIx) for default audio > 3. installed pulseaudio > 4. installed osspd > 5. start pulseaudio > 6. stard osspd defining --adsp as dsp1 and as a padsp slave > 7. start asterisk > > It's not perfect yet, but I do have ASL receiving audio from the URIx and > transmitting audio through the URIx.. it's not clear audio.. maybe audio > levels? Also note that there i an osspd-alsa but that doesn't work.. when > I try that it causes the usb closed errors that I had posted in the other > thread and ASL won't get past that point. > > Unfortunately the site is far enough away that I can't get to the device > and put it on the bench.. a user is reporting that "tones" are what he is > hearing after he unkeys > > If I can figure out the rest I'll be publishing all of the things that > need to be edited to 'get-er-done' until then I'll be playing with it... > any input/ideas/feedback is welcome! >

2 1