January 2019 - App_rpt-users - lists.keekles.org

Node 47788
by AD2TM 12 Jan '19

12 Jan '19

Hello All; For the past year at different time I have been trying to get an allstar node up and running. I have had various amounts of success. I too wish that there was a detailed step by step setup instruction list for us newbies, or a script that would walk a new user through the COMPLETE setup. I have found the documentation very frustrating to follow. Enough complaining. I have many questions, but will only as a couple: 1.) What is the CLI and what is it used for? 2.) I know my node, #47788 is registered, but no information can be found. Where how do I fix th Can someone try to connect and let me know their results? There is a radio connected and on, but on a simplex frequency. 73 Tom AD2TM

2 1

Disable commands on private node
by Jeff Lehman 11 Jan '19

11 Jan '19

Just spit balling here. Is it possible to disable the ability to run commands and macros on a private node? Jeff Get Outlook for iOS<https://aka.ms/o0ukef>

3 2

48168 and 49308 not in database?
by Russell Thomas 10 Jan '19

10 Jan '19

any ideas? http://stats.allstarlink.org/nodeinfo.cgi?node=48168 http://stats.allstarlink.org/nodeinfo.cgi?node=49308 73, Russell Thomas, KV4S

4 4

k0kn scripts debian 9
by jimmy keffer 10 Jan '19

10 Jan '19

is anyone who is using k0kn's swisarmy script or his email control script my debian 8 server was hacked if put it back up i will try debian 9 thaks jimmy ka3vgm

1 0

Allmon2
by Ed Wilhelm 10 Jan '19

10 Jan '19

Just moved Allmon over to a new server and also pulled the latest greatest version from github. Everything working great /except/ no link for bubble chart and node number does not link to stat page. Going cross eyed here trying to see what I may have missed. Gurus? Ed W8VT

3 4

EchoLink
by lengriff＠optimum.net 10 Jan '19

10 Jan '19

I finally have EchoLink working on my repeater. I kept following the instructions on wiki.allstarlink.org, but it would NOT work. Unfortunately, the instructions do not begin with an important step: You must enable EchoLink in Modules.conf. This may be obvious to seasoned users, but NOT to us users still on the learning curve. There still needs to be better step-by-step instructions for the whole AllStar setup process. I'm no expert, but I sure have learned a lot!

1 0

ALSA sound device and GPIO TX on OrangePI.
by Carl Makin 08 Jan '19

08 Jan '19

Hi Everyone, I’ve just started looking at Allstar, or more specifically Asterisk and app_rpt as a possible way to link several repeaters in our area together. Our hardware guy wants to use the OrangePi Zero as each repeater node and I’ve got Asterisk installed via the Allstarlink repo as per the FAQ on the wiki and Asterisk is running (on Armbian Stretch). The hardware guy also wants to use the onboard sound device on the OrangePI and GPIO pins to do tx/rx switching. Reading through the somewhat confusing documentation leads me to think this might not be possible. Is that the case? Does anyone have anything like this running? Thanks, Carl. (vk1kcm)

3 4

Re: [App_rpt-users] Motorola CDM1250 JU551 position B
by Bryan D. Boyle 08 Jan '19

08 Jan '19

which takes even LESS time....;) -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message. > On Jan 8, 2019, at 12:27, Scott Zimmerman <n3xcc(a)repeater-builder.com> wrote: > > > Take longer to wire the cable up than to get the sw working, in my experience. > That's why I made a radio interface that plugs directly into the back of the radio. ;) > > Check out the RIM_Maxtrac: http://www.repeater-builder.com/products/usb-rim-lite.html > > Scott > > Scott Zimmerman > Amateur Radio Call N3XCC > 474 Barnett Road > Boswell, PA 15531 > >> On 1/7/2019 9:39 PM, Bryan D. Boyle wrote: >> CDMs are stupid simple to connect to a URI. Just need discriminator rx audio, ground, xmit flat audio, and ptt. IIRC, rear connector pins 3, 5, 7, 11 (check the multitude of online sites for the specifics, but this is what I recall) >> set up radio in CPS to send the right signals to the right pins, turn off pre/deemphasis in radio, do all the rest (COS, pl decode/encode, de/preemphasis, etc) in asterisk. >> log in, radio-tune-menu to set levels and squelch, you are good to go. >> Take longer to wire the cable up than to get the sw working, in my experience. >> Simplest and fastest way. >> -- >> Bryan >> Sent from my iPhone 6S...No electrons were harmed in the sending of this message. >>> On Jan 7, 2019, at 14:40, Corey Dean <n3fe(a)repeater.net <mailto:n3fe@repeater.net>> wrote: >>> Mike is correct. This is all controlled in the cps. >>> >>> Corey n3fe >>> >>> On Mon, Jan 7, 2019 at 2:33 PM Mike Lee <ksixmju(a)gmail.com <mailto:ksixmju@gmail.com>> wrote: >>> >>> There are no physical jumpers in the CDM series (750/1250/1550) of radios. >>> >>> The GM300 is the radio that has the JU551; it controls de-emphasis. >>> >>> Mike >>> >>> On Mon, Jan 7, 2019 at 11:25 AM w4ram(a)outlook.com <mailto:w4ram@outlook.com> <w4ram(a)outlook.com >>> <mailto:w4ram@outlook.com>> wrote: >>> > >>> > Good morning, >>> > >>> > I am using a Motorola CDM1250 for my node. I am using the DMK URI. I am wondering if is necessarry change de JU551 >>> switch to position B as is recommended to be able to use this radio properly. >>> > >>> > Thank you for your assistance. >>> > >>> > Al >>> > W4RAM >>> > _______________________________________________ >>> > App_rpt-users mailing list >>> > App_rpt-users(a)lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> >>> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> > >>> > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, >>> please send a message to the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >>> scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, >>> please send a message to the list detailing the problem. >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

error
by jimmy keffer 08 Jan '19

08 Jan '19

my server keeps say this was i hacked i see web transcer is gone To: root(a)hub.horsezipsworld.com Subject: Cron <root@hub> /usr/sbin/monero From: Cron Daemon <hubnode1(a)gmail.com> Date: Tue, 8 Jan 2019 11:05:01 -0500 (EST) vm.nr_hugepages = 2000

1 0

Motorola CDM1250 JU551 position B
by w4ram＠outlook.com 08 Jan '19

08 Jan '19

Good morning, I am using a Motorola CDM1250 for my node. I am using the DMK URI. I am wondering if is necessarry change de JU551 switch to position B as is recommended to be able to use this radio properly. Thank you for your assistance. Al W4RAM

5 4