January 2019 - App_rpt-users - lists.keekles.org

ATA device on Allstarlink
by Joe Leikhim 23 Jan '19

23 Jan '19

Can I use an ATA device for a repeater node? Example I have a repeater that is equipped with a Zetron 48 B community repeater panel. Because all CTCSS processing is within the panel, the only convenient way to interface audio would be the phone port. I understand there will be some limitations as it won't be "nailed up". But will it work? -- Joe K4SAT

1 0

For sale - 4 RTCMs + 4 TRIMBLE THUNDERBOLT GPSDO + 4 PulseLarsen GPS0015 antennas
by Yuri Belkin 23 Jan '19

23 Jan '19

RTCMs & Antennas never been installed. RTCMs - 300$ / each. Trimble Thunderbolt GPSDO - 150$ / each. Antennas - 50 $ / each. Located in Russia. Intl. shipping available. -

1 0

callsigns instead of node numbers
by George Csahanin 23 Jan '19

23 Jan '19

There was a script written by 3DSP a few years back to substitute callsigns for node numbers and I tried it but its looking for a file astdb.txt which doesn't exist. Anybody know of a way to do this that works? GeorgeC W2DB --- This email has been checked for viruses by AVG. https://www.avg.com

4 4

chan_oss.so
by Robert Ruddy 22 Jan '19

22 Jan '19

Hello, I'm new to AllstarLink, but I've used asterisk in the past. It looks like in the raspberry pi stretch addition that some modules are missing such as chan_oss.so. Is there a reason why they are missing? Bob

2 2

RP3 w/ URI and RC210- no audio
by Jim Hertel 21 Jan '19

21 Jan '19

Down loaded & installed the Pi3 allstarlink asterick (node 47379), have the Uri-B with factory cables, and cables to the RC210. I think I have it right. Port forwarding, UDP 4569 is pointing to the unit(repeater). RC210 is in non repeat for the Pi's connected port. The Pi key's the RC210 when booting up, which key's the associated units connected to the 210, Plus the long hangtime is there 4 seconds.. have no audio, any Ideas? Thanks in advance! JIm n6kmr

2 1

Chan_alsaradio
by Pierre Martel 18 Jan '19

18 Jan '19

Any one used that channel driver? I know that is not a normal channel driver. I have a project of feeding audio to and from a local node. So if anyone have experience with this let me know. Pierre VE2PF

2 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 119, Issue 16
by Matthew Simmons 18 Jan '19

18 Jan '19

Can you install pulse audio? On Fri, Jan 18, 2019, 4:00 AM <app_rpt-users-request(a)lists.allstarlink.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > > You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > This site is dedicated to the memory of Jim Dixon WB6NIL > Today's Topics: > > 1. Re: Chan_alsaradio (Carl Makin) > > > > ---------- Forwarded message ---------- > From: Carl Makin <carl(a)stagecraft.cx> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Cc: > Bcc: > Date: Fri, 18 Jan 2019 20:39:53 +1100 > Subject: Re: [App_rpt-users] Chan_alsaradio > Hi Pierre, > > > On 17 Jan 2019, at 11:48 am, Pierre Martel <petem001(a)gmail.com> wrote: > > > > No one ever used Alsa radio? ok.. looks like I will have to play a bit > with this. > > I’m currently looking at chan_alsaradio to get an OrangePC Zero working. > I’ve just finished building a QEMU based Jessie build environment (very > slow, but seems usable) and am slowly working through dependancies to get > it compiled. > > > Carl. > (vk1kcm) > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >

2 1

win scp ?
by Ryan Gross 17 Jan '19

17 Jan '19

Jim, All: Fresh install of ASL on PI2b and fresh install on Win scp. I am trying to replace default rpt.conf file. and i can access it swap it but i get the error 3 security message. ryan n3ssl n3ssl yahoo com

2 1

win scp ?
by Ryan Gross 15 Jan '19

15 Jan '19

All: I just installed latest stretch install and all the updates for Pi2B. i am trying to use win scp and get all sorts of error stuff for file transfers. what am ia missing ? Ryan n3ssl n3ssl yahoo com

4 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 119, Issue 12
by Matthew Simmons 12 Jan '19

12 Jan '19

To find the password for your node go to www.allstarlink.org and sign in. There will be a tab on there that lets you view the details of your node. On Sat, Jan 12, 2019, 4:00 AM <app_rpt-users-request(a)lists.allstarlink.org wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > > You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > This site is dedicated to the memory of Jim Dixon WB6NIL > Today's Topics: > > 1. Node 47788 (AD2TM) > 2. Re: Node 47788 (Bryan St Clair) > > > > ---------- Forwarded message ---------- > From: AD2TM <ka2myd(a)frontiernet.net> > To: app_rpt-users(a)lists.allstarlink.org > Cc: > Bcc: > Date: Sat, 12 Jan 2019 00:36:17 +0000 > Subject: [App_rpt-users] Node 47788 > Hello All; > For the past year at different time I have been trying to get an allstar > node up and running. I have had various amounts of success. I too wish that > there was a detailed step by step setup instruction list for us newbies, or > a script that would walk a new user through the COMPLETE setup. I have > found the documentation very frustrating to follow. Enough complaining. > > I have many questions, but will only as a couple: > 1.) What is the CLI and what is it used for? > 2.) I know my node, #47788 is registered, but no information can be found. > Where how do I fix th > > Can someone try to connect and let me know their results? There is a radio > connected and on, but on a simplex frequency. > 73 > Tom AD2TM > > > > ---------- Forwarded message ---------- > From: Bryan St Clair <bryan(a)k6cbr.us> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Cc: > Bcc: > Date: Fri, 11 Jan 2019 16:39:39 -0800 > Subject: Re: [App_rpt-users] Node 47788 > I see you online and registered. I, however, was not able to connect to > you. Perhaps port forwarding or config of the port is wrong. > > CLI is where you can access the node via SSH. Command Line Interface > > I can jump on TeamViewer if you have it, to help you out if ya want. Just > email me directly off the list for the info. > > On Fri, Jan 11, 2019 at 4:36 PM AD2TM <ka2myd(a)frontiernet.net> wrote: > >> Hello All; >> For the past year at different time I have been trying to get an allstar >> node up and running. I have had various amounts of success. I too wish that >> there was a detailed step by step setup instruction list for us newbies, or >> a script that would walk a new user through the COMPLETE setup. I have >> found the documentation very frustrating to follow. Enough complaining. >> >> I have many questions, but will only as a couple: >> 1.) What is the CLI and what is it used for? >> 2.) I know my node, #47788 is registered, but no information can be >> found. Where how do I fix th >> >> Can someone try to connect and let me know their results? There is a >> radio connected and on, but on a simplex frequency. >> 73 >> Tom AD2TM >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> > > > -- > Bryan > K6CBR > bryan(a)k6cbr.us > Allstar Base: 43918, 43991 > Allstar Hubs: 43919, 47036, 47061(Testing) > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0