- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] app_rpt issue with Polycom VVX phone
by K Yoksh 25 May '17

25 May '17

I'm not sure, I believe we've tried it with a semi-busy node and had the same issue. Curiously, he can make a call across a trunk to my Asterisk box, and we can both mute our phones and it won't drop after an hour. I'd never heard of VAD, but will look into it. Thanks for the info Benjamin! 73, Kyle K0KN --- Original Message --- Activity disconnect? Maybe the phone has VAD turned on, and if there is not RX audio traffic, it thinks the line is hung and drops... Does the Polycom hang up when there is traffic? just guessing, haha ~Benjamin, KB9LFZ

1 0

app_rpt issue with Polycom VVX phone
by K Yoksh 25 May '17

25 May '17

Hi everyone, I'm trying to help a friend troubleshoot an issue with his Polycom IP phones. He is trying to use a Polycom VVX500 to monitor his Allstar nodes, but the phone hangs itself up after 30 seconds. We've tried all sorts of things to cure the issue. It doesn't occur when using Cisco or Aastra phones, or any softphone we've tried. Just these Polycoms. Calls from phone to phone don't auto-disconnect either, this only happens when the phone is used to call *any* Allstar node. Any suggestions? Thanks. 73 Kyle K0KN

3 2

Re: [App_rpt-users] app_rpt issue with Polycom VVX phone
by David Shaw 24 May '17

24 May '17

looks like Benjamin could be right. Download this manual http://support.polycom.com/global/documents/support/setup_maintenance/produ… Open the PDF and search for Voice activity detection David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Wed, May 24, 2017 at 3:37 PM, David Shaw <shawpbx(a)gmail.com> wrote: > I attached the manual and it looks like Benjamin could be right. > > Open the PDF and search for Voice activity detection > > David > > ke6upi > > > > -- > Thanks, David > > "Laws that forbid the carrying of arms...disarm only those who are neither > inclined nor determined to commit crimes. Such laws make things worse for > the assaulted and better for the assailants; they serve rather to encourage > than prevent homicides, for an unarmed man may be attacked with greater > confidence than an armed one." > Thomas Jefferson > > On Wed, May 24, 2017 at 1:14 PM, Benjamin Naber <Benjamin(a)project23d.com> > wrote: > >> Activity disconnect? Maybe the phone has VAD turned on, and if there is >> not RX audio traffic, it thinks the line is hung and drops... >> >> Does the Polycom hang up when there is traffic? >> >> just guessing, haha >> >> ~Benjamin, KB9LFZ >> >> >> On Wed, 2017-05-24 at 14:44 -0500, K Yoksh wrote: >> > Hi everyone, >> > >> > >> > I'm trying to help a friend troubleshoot an issue with his Polycom IP >> > phones. >> > >> > >> > He is trying to use a Polycom VVX500 to monitor his Allstar nodes, but >> > the phone hangs itself up after 30 seconds. >> > >> > >> > We've tried all sorts of things to cure the issue. It doesn't occur >> > when using Cisco or Aastra phones, or any softphone we've tried. Just >> > these Polycoms. >> > >> > >> > Calls from phone to phone don't auto-disconnect either, this only >> > happens when the phone is used to call *any* Allstar node. >> > >> > >> > Any suggestions? >> > >> > >> > Thanks. 73 >> > >> > >> > Kyle >> > K0KN >> > _______________________________________________ >> > App_rpt-users mailing list >> > App_rpt-users(a)lists.allstarlink.org >> > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> > >> > To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> > You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/c >> gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of >> the page. Enter your email address and press the "Unsubscribe or edit >> options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. > > >

1 0

Iaxrpt
by Brian Burton 24 May '17

24 May '17

Iaxrpt does not have a time out. However if your Internet drops for a split second it will. However, in the preferences is a permalink option. Assign your node numbers there in the order you wish them to connect. Restart iaxrpt and they will auto connect on startup. AB3AA Brian On May 24, 2017 8:35 AM, <app_rpt-users-request(a)lists.allstarlink.org> wrote: Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. Re: Iaxrpt (James R. Pilgram) 2. Re: Default session timeout? (Mike - W5JR) 3. Node Info Not Found! (Corey Badgley) 4. Re: Iaxrpt (Steve Zingman) ---------------------------------------------------------------------- Message: 1 Date: Tue, 23 May 2017 09:07:56 -1000 From: "James R. Pilgram" <jim.pilgram(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Iaxrpt Message-ID: <59248894.82ca620a.36c0b.55cf(a)mx.google.com> Content-Type: text/plain; charset="utf-8" An HTML attachment was scrubbed... URL: <http://lists.allstarlink.org/pipermail/app_rpt-users/ attachments/20170523/962570ff/attachment-0001.html> ------------------------------ Message: 2 Date: Tue, 23 May 2017 20:32:04 -0400 From: Mike - W5JR <w5jr.lists(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] Default session timeout? Message-ID: <3D8CA37E-00E2-4671-85E2-5C3FAAAF52A0(a)gmail.com> Content-Type: text/plain; charset=us-ascii I connect to my nodes via iaxrpt for days at a time and haven't encountered a timeout. tnx Mike / W5JR Alpharetta GA > On May 23, 2017, at 12:55 PM, Doug Kingston <dpk(a)randomnotes.org> wrote: > > I would like to know if there is a default session timeout in the asterisk app_rpt software. Our use case is a basic remote base configuration and the core question is: > If i connect to the node with iaxrpt (Windows application), will I be disconnect after N minutes? > And if so, what controls this and is there a default value for that timeout? > > Thanks, > -Doug- > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 3 Date: Tue, 23 May 2017 19:08:44 -0600 From: Corey Badgley <kc7mrq(a)gmail.com> To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Node Info Not Found! Message-ID: <CANsauWsoiFZM-by3zWEiW4uKuqc1we29T579gqBccLUKhy-NzQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" My stats are no longer being uploaded and need some direction on how to troubleshoot the issue. I checked my rpt.conf and the two "statpost" lines have not changed. I confirmed all is well when I checked " iax2 show registry" The server is an ACID system and the two node numbers are 29115 & 29847. Thanks for your help, Corey

2 1

Iaxrpt
by James R. Pilgram 24 May '17

24 May '17

3 5

Node Info Not Found!
by Corey Badgley 24 May '17

24 May '17

My stats are no longer being uploaded and need some direction on how to troubleshoot the issue. I checked my rpt.conf and the two "statpost" lines have not changed. I confirmed all is well when I checked " iax2 show registry" The server is an ACID system and the two node numbers are 29115 & 29847. Thanks for your help, Corey

1 0

Default session timeout?
by Doug Kingston 24 May '17

24 May '17

I would like to know if there is a default session timeout in the asterisk app_rpt software. Our use case is a basic remote base configuration and the core question is: If i connect to the node with iaxrpt (Windows application), will I be disconnect after N minutes? And if so, what controls this and is there a default value for that timeout? Thanks, -Doug-

2 1

AllStarLink at Hamvention 2017
by Steve Zingman 23 May '17

23 May '17

I knew I would forget someone. I forgot to include Fred W8FSM. I would also like to thank those that have contributed ideas and support. More people to add once they decide to become "official" Board of directors: Steve Zingman N4IRS Tim Sawyer WD6AWP Bryan Fields W9CR Kevin Custer W3KKC Infrastructure Team: Bryan Fields W9CR Mike Wolthuis KB8ZGL Fred Moses W8FSM Web Site(s) Team: Tim Sawyer WD6AWP Development Team: Mike Zingman N4IRR Steve Henke W9SH Jeff DePolo WN3A Dave Maciorowski W1JHK User and Node administration: Tim Sawyer WD6AWP Steve Zingman N4IRS Corey Dean N3FE 73, Steve N4IRS -- "What are HB_bridge, IPSC_bridge and Analog_bridge?"

2 2

AllStarLink at Hamvention 2017
by Steve Zingman 23 May '17

23 May '17

Well, we survived the Hamvention. I'll try to post what went on in regard to ASL but I want to thank Repeater Builder for hosting AllStarLink in their spaces at Dayton. We had a nice banner and a couple of demo systems setup. Quite a few people came by with suggestions and comments. One of the many things I was asked about is the AllStarLink organization. Simply put, AllStarLink Inc. is a not for profit formed to make sure ASL continues to thrive as a Open Source project to support HAM radio. ASL pays the bills to keep the servers running among other things. Below are the people working to keep things moving forward. As you can see, we could use some help in a number of areas. If you have a talent you think can be of use, get in touch with me. Board of directors: Steve Zingman N4IRS Tim Sawyer WD6AWP Bryan Fields W9CR Kevin Custer W3KKC Infrastructure Team: Bryan Fields W9CR Mike Wolthuis KB8ZGL Web Site(s) Team: Tim Sawyer WD6AWP Development Team: Mike Zingman N4IRR Steve Henke W9SH Jeff DePolo WN3A Dave Maciorowski W1JHK User and Node administration: Tim Sawyer WD6AWP Steve Zingman N4IRS Corey Dean N3FE 73, Steve N4IRS -- "What are HB_bridge, IPSC_bridge and Analog_bridge?"

1 0

RPi w/DIAL Repeater Stuck In Transmit Mode
by Bob Pyke 22 May '17

22 May '17

Our repeater hung up in transmit mode, and would not respond to radio DTMF commands to restart Asterisk or reboot. We had to manually reset the power. We don't understand why. If this should be a reoccurring issue, perhaps we need an external watchdog timer to reset power after x minutes of constant PTT activation. Looking for suggestions. We are planning to setup a remote (no internet) repeater that is not easily accessible, so want to make sure we have a solution. Thanks, Bob k6ecm 73 Sent from iPad

5 8