- App_rpt-users - lists.keekles.org

Alternatives to cm108/prefab boxes for PTT/COR?
by Jonny 290 23 Feb '17

23 Feb '17

I'll be honest, I have run out of CM108 fobs to modify, and almost all the new ones are epoxy covered. I'd like to put my node back up, but I want a solution that allows me to use a standard USB audio fob for audio in/out and then another fob - probably serial - for PTT and COR. Last I checked (year or two ago), there was no easy answer to this. I hacked and beat on it, didn't get anywhere Have we made any breakthroughs in PTT/COR via serial lately? Thanks in advance!

3 2

Allmon2 - Monitor VS Local Monitor
by larry 22 Feb '17

22 Feb '17

2 2

Re: [App_rpt-users] Help (please) Interfacing to MTR
by Mark Guibord 19 Feb '17

19 Feb '17

Is that a Motorola MTR2000 repeater? If so Let me know I can probably help you. Mark - K7IZA 702-528-4700 -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Barry Buelow Sent: Saturday, February 18, 2017 8:56 AM To: app_rpt-users(a)lists.allstarlink.org Subject: [App_rpt-users] Help (please) Interfacing to MTR If anyone on the list has experience interfacing and programming an MTR, I'd like to chat off list. Thanks Barry w0iy _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

4 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 96, Issue 49
by Barry Buelow 19 Feb '17

19 Feb '17

On 2/18/2017 10:16 PM, app_rpt-users-request(a)lists.allstarlink.org wrote: sorry - I did mean MTR 2000. I'm attempting to use the J5 rear conn Aux I/O to a homebrew CM119B fob to RPi. Reading online docs, but had some difficulty finding things in the menus. Just got the unit to pass audio via asterisk tonight. I think I'm 90% of the way now. If I fall on my face (again) I'll cry for help with more specificity! Thanks for the offers. Barry w0iy > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 18 Feb 2017 08:52:45 -1000 > From: "James R. Pilgram" <jim.pilgram(a)gmail.com> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Subject: Re: [App_rpt-users] Help (please) Interfacing to MTR > Message-ID: <58a897ff.1121620a.ce775.a827(a)mx.google.com> > Content-Type: text/plain; charset=utf-8 > > MTR?.... MTR2000? > > > Original Message > From: iabarryyy(a)gmail.com > Sent: February 18, 2017 6:57 AM > To: app_rpt-users(a)lists.allstarlink.org > Reply-to: app_rpt-users(a)lists.allstarlink.org > Subject: [App_rpt-users] Help (please) Interfacing to MTR > > If anyone on the list has experience interfacing and programming an MTR, > I'd like to chat off list. > > Thanks > Barry w0iy > > Is that a Motorola MTR2000 repeater? If so Let me know I can probably help you. > > Mark - K7IZA > 702-528-4700 > *******************************

1 0

Help (please) Interfacing to MTR
by Barry Buelow 18 Feb '17

18 Feb '17

If anyone on the list has experience interfacing and programming an MTR, I'd like to chat off list. Thanks Barry w0iy

2 1

RTCM Voter Compiler build fail
by Hayden Honeywood 17 Feb '17

17 Feb '17

Hi All, I've gotten around to building several of the original voter PCB boards (or RTCM). I can easily upload Voter.cry and make the boards work, however I wish to implement "Chuck" squelch which requires a recompile/rebuild. I've spoken with Chuck who said run everything as default (the same as Jim had it) and it should build however I'm getting linker errors even before making the change in HardwareProfile.h. As I'm not much of a programmer - used MPLAB a few times, I was hoping someone else had come across this issue. My steps were - Download latest firmware from svn. Open voter.mcw in MPLAB v8.92 here. MPLAB C30 compiler is installed with 60 day full functionality. Build All > That produces these errors. Helpers.o: Link Error: Could not allocate section .text, size = 2058 PC units, attributes = code DNS.o: Link Error: Could not allocate section .text, size = 1992 PC units, attributes = code UDP.o: Link Error: Could not allocate section .text, size = 1332 PC units, attributes = code UART.o: Link Error: Could not allocate section .text, size = 1274 PC units, attributes = code ARP.o: Link Error: Could not allocate section .text, size = 1040 PC units, attributes = code Telnet.o: Link Error: Could not allocate section .text, size = 942 PC units, attributes = code SPIEEPROM.o: Link Error: Could not allocate section .text, size = 912 PC units, attributes = code squelch.o: Link Error: Could not allocate section .text, size = 824 PC units, attributes = code StackTsk.o: Link Error: Could not allocate section .text, size = 676 PC units, attributes = code ICMP.o: Link Error: Could not allocate section .text, size = 622 PC units, attributes = code IP.o: Link Error: Could not allocate section .text, size = 452 PC units, attributes = code Tick.o: Link Error: Could not allocate section .text, size = 300 PC units, attributes = code Link Error: Could not allocate program memory Link step failed. Has anyone come across this issue?

2 1

Re: [App_rpt-users] archivedir permissions recheck
by David McGough 17 Feb '17

17 Feb '17

BTW, in addition to the open() function call, below, there are a few other spots that need new O_CREAT permissions...Just do a search thru app_rpt.c for the string ",0600" to find them. Change those permissions for something friendlier (like: 0644) and recompile. On Thu, 21 Jul 2016, David McGough wrote: > > Hi Tom, > > Currently, the file permissions are hard-coded in the stock version of > the app_rpt.c code. See line #22084 of app_rpt.c: > > fd = open(fname,O_WRONLY | O_CREAT | O_APPEND,0600); > > So, only the file owner has read/write permission. > > With the stock code, using chmod (perhaps from a cron script?) is the > simplest solution. > > 73, David KB4FXC > > > On Thu, 21 Jul 2016, Tom Hayward wrote: > > > I setup archivedir and am successfully getting recordings. I want to allow > > access to these recordings on a web server. The recordings are in the web > > root and I can browse them. When I try to download a recording, I get > > permission denied because the recording files do not have world-read and > > are owned by root. A chmod solves this, but only for old recordings. New > > files still get mode 0600. How can I change the mode of new files? > > > > Tom KD7LXL > > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Another node server having stability issues
by C B 17 Feb '17

17 Feb '17

Please can someone help me find the answer to make my server / nodes reliable. The computer is a HP 5700 with one gig of ram. it locks up and or sends clicking sounds with key-ups to the rest of the linked system and or stops responding. I have re-installed DIAL cut back to one URI and it ran ok for several hours. when i checked it this morning it was in failure again. Any help appreciated. below are some log outputs that may help in finding out what is wrong. Chris Oct 24 05:14:22 N6LXX-OAK_GLEN kernel: [ 729.298590] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.0047/input/input83Oct 24 05:14:22 N6LXX-OAK_GLEN kernel: [ 729.298811] hid-generic 0003:0D8C:013A.0047: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.550065] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.603061] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.656061] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.709060] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.756159] usb usb4-port1: disabled by hub (EMI?), re-enabling...Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 730.757898] usb 4-1: USB disconnect, device number 78Oct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 731.000024] usb 4-1: new full-speed USB device number 79 using uhci_hcdOct 24 05:14:23 N6LXX-OAK_GLEN kernel: [ 731.120027] usb 4-1: device descriptor read/64, error -71Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430055] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013aOct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430059] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430062] usb 4-1: Product: USB PnP Sound DeviceOct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.430064] usb 4-1: Manufacturer: C-Media Electronics Inc. Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.526597] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.0048/input/input84Oct 24 05:14:24 N6LXX-OAK_GLEN kernel: [ 731.527062] hid-generic 0003:0D8C:013A.0048: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.774068] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.827063] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.880068] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.933063] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.986061] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.988155] usb usb4-port1: disabled by hub (EMI?), re-enabling...Oct 24 05:14:25 N6LXX-OAK_GLEN kernel: [ 732.989902] usb 4-1: USB disconnect, device number 79Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.232025] usb 4-1: new full-speed USB device number 80 using uhci_hcdOct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.352023] usb 4-1: device descriptor read/64, error -71Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662056] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013aOct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662060] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662063] usb 4-1: Product: USB PnP Sound DeviceOct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.662066] usb 4-1: Manufacturer: C-Media Electronics Inc. Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.758602] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.0049/input/input85Oct 24 05:14:26 N6LXX-OAK_GLEN kernel: [ 733.759102] hid-generic 0003:0D8C:013A.0049: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.002056] retire_capture_urb: 494 callbacks suppressedOct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.030066] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.083065] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.136068] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:27 N6LXX-OAK_GLEN kernel: [ 735.189064] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd asterisk rqt 161 rq 1 len 4 ret -71Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.220156] usb usb4-port1: disabled by hub (EMI?), re-enabling...Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.221909] usb 4-1: USB disconnect, device number 80Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.464013] usb 4-1: new full-speed USB device number 81 using uhci_hcdOct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.584009] usb 4-1: device descriptor read/64, error -71Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894060] usb 4-1: New USB device found, idVendor=0d8c, idProduct=013aOct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894064] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894066] usb 4-1: Product: USB PnP Sound DeviceOct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.894069] usb 4-1: Manufacturer: C-Media Electronics Inc. Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.990595] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.3/0003:0D8C:013A.004A/input/input86Oct 24 05:14:28 N6LXX-OAK_GLEN kernel: [ 735.990816] hid-generic 0003:0D8C:013A.004A: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device] on usb-0000:00:1d.0-1/input3 -- Hungup 'DAHDI/pseudo-233330804' == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:36] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:37] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 -- Hungup 'DAHDI/pseudo-688755356' == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:38] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:39] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:41] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:41] WARNING[713]: chan_simpleusb.c:2646 simpleusb_read: Possibly stuck USB read channel. [usb29894][Oct 24 05:56:41] WARNING[713]: chan_simpleusb.c:2654 simpleusb_read: Nope, USB read channel [usb29894] wasn't stuck after all.[Oct 24 05:56:41] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:43] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:43] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:45] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:45] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 == Set device 5-1:1.0 to usb29894 == Parsing '/etc/asterisk/simpleusb_tune_usb29894.conf': Found[Oct 24 05:56:47] WARNING[714]: chan_simpleusb.c:1625 hidthread: Loaded parameters from simpleusb_tune_usb29894.conf for device usb29894 .[Oct 24 05:56:48] NOTICE[714]: chan_simpleusb.c:1672 hidthread: EEPROM Loaded on channel usb29894 -- Hungup 'DAHDI/pseudo-2067220005'

4 5

Re: [App_rpt-users] URI Hook up for Yeasu VXR-7000 (Angeo and Kevin)
by William Higgins 16 Feb '17

16 Feb '17

I'm very interested in this thread because I recently attempted to get this working on a VXR-7000 with a RIM Lite from Scott Zimmerman. In my case, I initially tried using dsp mode and could not get it working at all. We wanted to use dsp mode because we wanted to implement the PL tones through the Raspberry Pi 3 controller. I then fell back to using COR from the repeater with carrierfrom=USBinvert in the usbradio.conf file. This works correctly but of course, we'll have to program the PL into the repeater itself. I know that the URI and the RIM Lite are different interfaces with different wiring diagrams, but the concept should be the same. Since the initial setup of the repeater, I've attempted to use dsp mode with a Raspberry Pi 3 with a RIM Lite and a different radio at my QTH and it seems to work just fine. Granted different radio, etc. but at least the Pi has the power to do the job. Might be an interesting idea to create a repository for radio and interface connection diagrams with the relevant configuration bits. That could probably save folks a lot of hassle in trying to figure this stuff out for themselves. (I DO appreciate the learning factor and it's benefits, but it sure can be frustrating sometimes!) 73! Bill Higgins N0NOE Sullivan Amateur Radio Club AllStar Link Node 44011

7 11

Re: [App_rpt-users] DMKx Uri Problem
by Steve Zingman 15 Feb '17

15 Feb '17

Does your COS go low or high on input signal? Sent via smoke signal (AT&T) On Feb 13, 2017 11:59 AM, Bruce B Isaacson <ike(a)jmbruce.biz> wrote: Hi Steve, When I run asterisk vvv -r and then connect from Allstar to the radio via "Key (Transmit) I get the following: ”Connected to Asterisk 1538 currently running on JamestownNY (pid = 2491) [Feb 13 11:45:46] WARNING[2502]: chan_iax2.c:9454 socket_process: Call on IAX2/allstar-public-923 is already up, can't start on it" Still having a connection from Allstar Web Tranceiver to the radio but not back to Allstar Tranceiver. I did replace the simpleusb.conf with the one provided by you without and change in operation. Not sure where to look next. Your guidance will be greatly appreciated. Bruce -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Steve Zingman Sent: Sunday, February 12, 2017 8:31 PM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] DMKx Uri Problem We are in the process of updating the drupal. I will also be updating the configs on allstarlink.org. In the meantime, here is a link to the sample config for simpleusb in DIAL. <https://github.com/N4IRS/AllStar/blob/master/configs/simpleusb.conf> On 02/12/2017 08:26 PM, Bruce B Isaacson wrote: > Steve, > Sorry but I am lost! I have changed carrierfrom = usb and ctcssfrom = usb every possible way and having it this way works perfectly in simpleusb-tune-menu however I lose the connection between the allstarlink node to the radio but I can hear my HT at the Webtransceiver. > > I have looked on Allstarlink.org but the simpleusb configuration appears to be antiquated. See my file and maybe you can tell me where I am going wrong. > > Thank you; I certainly appreciate your help. > > Bruce > > ; SimpleUSB configuration > > [general] > > [usb] > > eeprom=0 > > hdwtype=0 ; Leave this set to 0 for USB sound fobs modified using > ; the instructions from usbfob.pdf. Use a setting of > ; 1 is for Dingotel/Sph interfaces. > > > ; Receiver parameters > > rxboost = 1 ; 0 = 20db attenuator inserted, 1= 20db attenuator removed > ; Set to 1 for additonal gain if using a > low-level receiver output > > carrierfrom = usb ; no,usb,usbinvert > ; no - no carrier detection at all > ; usb - from the COR line on the USB sound fob (Active high) > ; usbinvert - from the inverted COR line on > the USB sound fob (Active low) > > ctcssfrom = usb ; no,usb,usbinvert > ; no - CTCSS decoding, system will be carrier squelch > ; usb - CTCSS decoding using input from USB sound fob (Active high) > ; usbinvert - from the inverted CTCSS line on > the USB sound fob (Active low) > > ;deemphasis =yes ; enable de-emphasis (input from discriminator) > > ;plfilter = no ; enable PL filter > > ;rxondelay = 0 ; number of 20ms intervals to hold off receiver turn-on indication > > > ; Transmitter parameters > > txmixa = voice ; Left channel output (A): no,voice,tone,composite,auxvoice > ; no - Do not output anything > ; voice - output voice only > > txmixb = voice ; Right channel output (B): no,voice,tone,composite,auxvoice > ; See txmixa above. > > txboost = 0 > > invertptt = 0 ; Invert PTT 0 = ground to transmit, 1 = open to transmit > ; This is the collector lead of the 2n4401 on the modified > ; usb sound fob. > ; please refer to the howto for the procedure to do this. > > -----Original Message----- > From: App_rpt-users > [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of > Steve Zingman > Sent: Sunday, February 12, 2017 5:05 PM > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] DMKx Uri Problem > > I would check your COS and CTCSS settings in the channel > simpleusb.conf > > > On 02/12/2017 04:59 PM, Bruce B Isaacson wrote: >> Steve, >> Uridiag worked perfectly and it passes all tests and now comes the however; when I do a simpleusb-tune-menu Set RX Voice Level (Using Display) I get nothing. I tested the output from the radio and it is making it just fine to the URIx but not beyond that. It appears to me that all the other test work just fine including the Set Transmit A and B level. Hear the tones just fine. Currently the RX Channel is set at 650. >> >> So it appears that all is fine going out to the radio but not into the node. When I access the node using the computer I hear it just fine but not my HT when I transmit back. Sort of repeating myself here. Actually back to square 1. >> >> Any ideas I can try would be greatly appreciated. >> >> Thanks for the help. >> >> -----Original Message----- >> From: App_rpt-users >> [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of >> Steve Zingman >> Sent: Sunday, February 12, 2017 1:39 PM >> To: Users of Asterisk app_rpt >> Subject: Re: [App_rpt-users] DMKx Uri Problem >> >> Bruce, >> >> A reload will NOT fix your issue. >> >> We have found a bug in uridiag. >> >> 1: Make sure asterisk is NOT running when you want to use uridiag. It will fail. >> >> 2: uridiag does NOT use any part of asterisk (AllStar) it is a standalone program. >> >> 3: The bug only affects uridiag, not asterisk >> >> 4: I will be publishing a fix for uridiag later today or tomorrow. >> >> 5: if you want to test uridiag before the fix. >> >> stop asterisk >> >> run alsamixer >> >> press F6 to select the C-Media sound device >> >> use the up arrow to set the Headphone level to 100<>100 (100%) >> >> press esc to exit alsamixer >> >> run uridiag and test again. >> >> If you re-run asterisk then uridiag, uridiag will fail. You will have >> to reset the level to 100% >> >> The bug is that URI diag was supposed to set the level to 100% when it starts, it does not do that properly. >> >> The fix will solve this going forward. >> >> >> 73, Steve N4IRS >> >> >> On 02/11/2017 09:00 AM, Bruce B Isaacson wrote: >>> Appreciate all the help! Please keep it coming! Need to fix this or reload. >>> >>> -----Original Message----- >>> From: App_rpt-users >>> [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of >>> Steve Zingman >>> Sent: Saturday, February 11, 2017 5:56 AM >>> To: Bob; Users >>> Subject: Re: [App_rpt-users] DMKx Uri Problem >>> >>> I disagree. URI Diag works in DIAL. URIDiag has problem on the Pi. >>> Works fine on a X86. >>> Sent via smoke signal (AT&T) >>> On Feb 10, 2017 9:39 PM, Bob Pyke <k6ecm1(a)gmail.com> wrote: >>> >>> I chased this for awhile until I realized uridiag does not work with >>> DIAL. Chasing that down was not up very high on anyone's list. I've >>> chased URI and URIx issues, and the likelihood of it being the >>> problem is slim to none. On the other hand, Bryan's suggestions are >>> worth the time chasing :-) >>> >>> Thanks, >>> Bob >>> k6ecm >>> 73 >>> >>> Sent from iPad >>> >>> >>>> On Feb 10, 2017, at 2:16 PM, Bruce B Isaacson <ike(a)jmbruce.biz> wrote: >>>> >>>> Hi Bryan, >>>> There is a deeper problem than Asterisk. The program I am using is a stand-alone program designed to test DMK URIx dongle. Based on the test there is a problem other than Asterisk or uridiag. As for usbradio... there is no audio as there is no audio in the uridiag program that is why I believe that it might be a driver. I have been trying to avoid reinstalling Dial or possibly doing a Virtual box install on another computer. >>>> >>>> Thanks for your input. >>>> >>>> -----Original Message----- >>>> From: App_rpt-users >>>> [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of >>>> Bryan D. Boyle >>>> Sent: Friday, February 10, 2017 4:37 PM >>>> To: app_rpt-users(a)lists.allstarlink.org >>>> Subject: Re: [App_rpt-users] DMKx Uri Problem >>>> >>>>> On 2/10/2017 2:54 PM, Bruce B Isaacson wrote: >>>>> Hello, >>>> What version of the asterisk/allstar are you using? >>>> >>>> What does the device= line look like in your usbradio_tune_usbxxxx.conf look like? >>>> >>>> Is rpt.conf pointing to the right usb device (should be the >>>> rxchannel= line, where usbxxxx in this line should be the same as >>>> the usbxxxx in the tune file name >>>> >>>> -- >>>> Bryan D. Boyle >>>> Morrisville PA >>>> http://www.wb0yle.com >>>> http://www.lotuseuropa.us >>>> >>>> #include funny.quote.here >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>>> >>>> _______________________________________________ >>>> App_rpt-users mailing list >>>> App_rpt-users(a)lists.allstarlink.org >>>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>>> >>>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

4 5