- App_rpt-users - lists.keekles.org

Allmon2 Mobile?
by Lee Woldanski 10 Feb '17

10 Feb '17

Greetings, Is anyone working on adding the necessary bits of code to make Allmon2 more mobile friendly? It is fantastic to be able to monitor and control my repeaters via my smartphone and tablet... the icing on the cake would be optimizing it for those platform browsers. Thanks! Lee -- Lee Woldanski, AScT VE7FET

2 1

Re: [App_rpt-users] Pi2 with a Vertex VX-150
by Steve Zingman 08 Feb '17

08 Feb '17

You have no COS signal from the receiver. You will have to use VOX. Sent via smoke signal (AT&T) On Feb 8, 2017 11:23 AM, kb1mcu(a)gmail.com wrote: Hi Everyone, I could really use some help here. I don’t know if this is a wiring issue or a configuration issue. It’s probably a configuration issue. I’m trying to build a Simplex Node using an HT. I purchased a URI and made a cable going from the URI to the TRRS Jack on my Vertex VX-150 HT. It will only transmit or receive. And this is dependent on whether the “carrierfrom=” setting is set to “usb” or “usbinvert” When the simpleusb.conf is setup with “carrierfrom=usbinvert”, my HT will transmit call sign and time and stuff like that but it does not recognize any DTMF Commands I send using a different radio on the same frequency. If it is set to “carrierfrom=usb” my Pi2 will receive DTMF commands but the HT will not transmit anything. Thanks In Advance, -Jamie / KB1MCU ------------------------------ [image: Avast logo] <https://www.avast.com/antivirus> This email has been checked for viruses by Avast antivirus software. www.avast.com <https://www.avast.com/antivirus>

1 0

Pi2 with a Vertex VX-150
by kb1mcu＠gmail.com 08 Feb '17

08 Feb '17

Hi Everyone, I could really use some help here. I don’t know if this is a wiring issue or a configuration issue. It’s probably a configuration issue. I’m trying to build a Simplex Node using an HT. I purchased a URI and made a cable going from the URI to the TRRS Jack on my Vertex VX-150 HT. It will only transmit or receive. And this is dependent on whether the “carrierfrom=” setting is set to “usb” or “usbinvert” When the simpleusb.conf is setup with “carrierfrom=usbinvert”, my HT will transmit call sign and time and stuff like that but it does not recognize any DTMF Commands I send using a different radio on the same frequency. If it is set to “carrierfrom=usb” my Pi2 will receive DTMF commands but the HT will not transmit anything. Thanks In Advance, -Jamie / KB1MCU --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

admin@allstarlink.org
by Greg 07 Feb '17

07 Feb '17

I tried to request a callsign change and was rejected by gmail saying I was likely spam.... What now? ~Greg

3 2

Pi 3 Use of GPIO for PTT and COS
by Marshall Oldham 06 Feb '17

06 Feb '17

Greetings, Just wondering if anyone has been able to modify SimpleUSB or USBradio channel drivers to be able to use GPIO pins on the PI 3 for PTT and COS. This would be very useful for using potted sound fobs where you can not access the COS and PTT pins. I have noticed that the VK Link guys have channel drivers that support this feature. http://nevarc.net.au/manual/index.php?page=Wiring+to+a+radio Check out their Chan_SimpleUSB, Chan_USBradio configurations. http://nevarc.net.au/manual/index.php?action=whatlinkshere <http://nevarc.net.au/manual/index.php?action=whatlinkshere&page=Choosing+th e+Channel+Driver> &page=Choosing+the+Channel+Driver Looks like the work has been done, wondering if this could be added to official DIAL release features. Sure would be nice for folks that want to experiment without having to spend very much to play in the Allstarlink technology. Marshall - ke6pcv

1 0

Re: [App_rpt-users] App_rpt-users Digest, Vol 96, Issue 19
by Jeff Carrier 06 Feb '17

06 Feb '17

Good to see you Kirk, It's been a while but your response is exactly as I would have expected ;) On Mon, Feb 6, 2017 at 10:35 AM, < app_rpt-users-request(a)lists.allstarlink.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ > rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > > You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > This site is dedicated to the memory of Jim Dixon WB6NIL > > > Today's Topics: > > 1. Re: App_rpt-users Digest, Vol 96, Issue 7 (Kirk Just Kirk) > 2. Re: App_rpt-users Digest, Vol 96, Issue 7 (David Shaw) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 6 Feb 2017 09:18:12 -0800 > From: Kirk Just Kirk <wb6egr(a)gmail.com> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 96, Issue 7 > Message-ID: > <CAPN8drwPLg_xfX65N0V65fbCb7jC3YG4XcmCiGpb9 > ieh30cYtg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > You are not alone! I had numbers 310 and 320 WAY back when. Then we started > running IRLP on the same platform and Dave Cameron went NUTS! Remember the > threat to yank our PGP keys? > Well that was all i needed to hear. I told Cameron to shove my 2 node > numbers up his ass (keys included) and never looked back. Nodes 2155-2159 > were born. > IRLP is like cruising in a old "Escort"...running on 3 cylinders, a AM > radio that gets 2 stations, no AC, manual windows and a big spring that > pokes you in the ass.Does it run? well yeah kinda. > Dave Cameron was PISSED! Allstar was cutting in on his ability to sell a > SSI-202 chip and a small "peek & Poke" board for $170..and you get a node > number tossed in for free... > You were not allowed to set it up yourself, one of Daves minnions had to > download you, you got treated like the cable company treats you. > IRLP changed the ham world like the invention of the automobile, Jim and > Steve brought it into the 21st century....enjoy the smooth ride. > > > On Mon, Feb 6, 2017 at 7:50 AM, JJC <cummingsj(a)gmail.com> wrote: > > > I am very turned off of IRLP by the overall attitude of the "team" that > > seems against the spirit of Amateur Radio in my opinion. You contrast > that > > with Allstar that is opensourced and based on a well know and supported > OSS > > PBX software with good (positive) community support and participation, > > that's enough for me to be very happy. > > > > Sent from the iRoad > > > > On Feb 5, 2017, at 19:18, Lu V <luvencl8(a)gmail.com> wrote: > > > > I used IRLP back in the day, but when I started to get flak from one of > > his cronies, and I was actually called a lid at one point, that's when I > > realized that it was time to move on and make a change towards a real > open > > source platform which is much more advanced and has great people willing > to > > help out.. All of the proprietary and political crap that went on on that > > network was enough to make one puke! Sorry, I'm just telling you how it > was > > and the faster I got away from IRLP the better off I was. I don't miss it > > at all! > > > > Lu Vencl > > > > On Feb 4, 2017, at 13:13, Jeff Carrier <k0jsc.jeff(a)gmail.com> wrote: > > > > Folks will migrate to the better option naturally. I'm already seeing > > that sort of migration here. I can do a lot more with allstar than any > of > > the other available options. Allstar is also actively developed. > > > > On Sat, Feb 4, 2017 at 10:00 AM, <app_rpt-users-request@lists. > > allstarlink.org> wrote: > > > >> Send App_rpt-users mailing list submissions to > >> app_rpt-users(a)lists.allstarlink.org > >> > >> To subscribe or unsubscribe via the World Wide Web, visit > >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rp > >> t-users > >> or, via email, send a message with subject or body 'help' to > >> app_rpt-users-request(a)lists.allstarlink.org > >> > >> You can reach the person managing the list at > >> app_rpt-users-owner(a)lists.allstarlink.org > >> > >> When replying, please edit your Subject line so it is more specific > >> than "Re: Contents of App_rpt-users digest..." > >> > >> This site is dedicated to the memory of Jim Dixon WB6NIL > >> > >> > >> Today's Topics: > >> > >> 1. Re: experimental reflector irlp (Bryan Fields) > >> > >> > >> ---------------------------------------------------------------------- > >> > >> Message: 1 > >> Date: Sat, 4 Feb 2017 10:55:08 -0500 > >> From: Bryan Fields <Bryan(a)bryanfields.net> > >> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > >> Subject: Re: [App_rpt-users] experimental reflector irlp > >> Message-ID: <91bc750a-b1e9-a4a6-a522-0b7e2a02d745(a)bryanfields.net> > >> Content-Type: text/plain; charset=utf-8 > >> > >> On 2/4/17 10:28 AM, Buddy Brannan wrote: > >> > Can't agree. Mr. Cameron has made his views on that pretty clear. Let > >> him have his closed off proprietary sandbox. > >> > >> Fuck him, it's source code, and code has no politics. If people want to > >> use > >> it they should be free to do so. If he wants to ban users from his > >> network so > >> be it. > >> > >> More users he bans the faster irlp dies. I see the irlp channel driver > as > >> being a migration tool. > >> > >> -- > >> Bryan Fields > >> > >> 727-409-1194 - Voice > >> http://bryanfields.net > >> > >> > >> ------------------------------ > >> > >> Subject: Digest Footer > >> > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)lists.allstarlink.org > >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > >> > >> > >> ------------------------------ > >> > >> End of App_rpt-users Digest, Vol 96, Issue 7 > >> ******************************************** > >> > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://lists.allstarlink.org/ > > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > > the page. Enter your email address and press the "Unsubscribe or edit > > options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://lists.allstarlink.org/ > > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > > the page. Enter your email address and press the "Unsubscribe or edit > > options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)lists.allstarlink.org > > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://lists.allstarlink.org/ > > cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of > > the page. Enter your email address and press the "Unsubscribe or edit > > options button" > > You do not need a password to unsubscribe, you can do it via email > > confirmation. If you have trouble unsubscribing, please send a message to > > the list detailing the problem. > > >

2 1

Re: [App_rpt-users] App_rpt-users Digest, Vol 96, Issue 7
by Jeff Carrier 06 Feb '17

06 Feb '17

Folks will migrate to the better option naturally. I'm already seeing that sort of migration here. I can do a lot more with allstar than any of the other available options. Allstar is also actively developed. On Sat, Feb 4, 2017 at 10:00 AM, < app_rpt-users-request(a)lists.allstarlink.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)lists.allstarlink.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_ > rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)lists.allstarlink.org > > You can reach the person managing the list at > app_rpt-users-owner(a)lists.allstarlink.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > This site is dedicated to the memory of Jim Dixon WB6NIL > > > Today's Topics: > > 1. Re: experimental reflector irlp (Bryan Fields) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 4 Feb 2017 10:55:08 -0500 > From: Bryan Fields <Bryan(a)bryanfields.net> > To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> > Subject: Re: [App_rpt-users] experimental reflector irlp > Message-ID: <91bc750a-b1e9-a4a6-a522-0b7e2a02d745(a)bryanfields.net> > Content-Type: text/plain; charset=utf-8 > > On 2/4/17 10:28 AM, Buddy Brannan wrote: > > Can't agree. Mr. Cameron has made his views on that pretty clear. Let > him have his closed off proprietary sandbox. > > Fuck him, it's source code, and code has no politics. If people want to > use > it they should be free to do so. If he wants to ban users from his > network so > be it. > > More users he bans the faster irlp dies. I see the irlp channel driver as > being a migration tool. > > -- > Bryan Fields > > 727-409-1194 - Voice > http://bryanfields.net > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > > ------------------------------ > > End of App_rpt-users Digest, Vol 96, Issue 7 > ******************************************** >

9 8

Pass a flag to script file from rpt.conf?
by DuaneVT . 05 Feb '17

05 Feb '17

I need to control switches within a script file via user dtmf command. How would I pass a number or flag from the app_rpt to my script file? I have been trying this from terminal, but do not understand how to turn control over to the remote user. Thanks and 73, Duane KA1LM

2 2

Pass a flag to script file from rpt.conf?
by DuaneVT . 05 Feb '17

05 Feb '17

WXZIP is an archive application? Please explain a little how this is of use. Thanks, Duane KA1LM

2 1

Re: [App_rpt-users] DIAL Distribution Allstarlink Update
by info＠rainerbertsch.de 05 Feb '17

05 Feb '17

Hi Steve, I would like to ask if there is a new version of DIAL in which I can update in a simple way ? Is it necessary to reinstall the asterisk with app_rpt and how does it work ? I like to update my debian and of course the allstar-part. Is there any "How To" for the update procedure? Thanks a lot ! 73, Rainer DF3SY

4 3