- App_rpt-users - lists.keekles.org

GPS Time Period Elapsed tried 9600 baud
by Skyler F 19 Jan '17

19 Jan '17

Well, eliminating the network switch seemed to dramatically improve our voter system issue. The host didn't randomly get lost, in turn making the RTCM go offline for a second and come back online. I thought it solved the problem until the next day, I started to randomly hear the voter go offline again and come back on. It has been very difficult to be logged into the RTCM while the problem happens, but I think I got it once, and I am getting the old GPS time period elapsed message. So we are obviously getting an OK GPS data, I am not getting this error every minute, it happens anywhere from once every hour to once every day. Can someone explain why changing the data rate to 9600 baud is not working for us on any of the 4 GPS units, but it is fine for everyone else? Another thing I am confused about is firmware, So these GPS-18 serial units have a firmware in them? And if so, would upgrading/downgrading affect the data? I am assuming we are getting proper NMEA because I don't think an improper format would give us 99% operation. 73 Skyler KD0WHB

2 1

Whatś this?
by Chris Viningre 19 Jan '17

19 Jan '17

I am trying to connect my repeater to one of my other nodes. There is no problem connecting to other nodes. They are on two different computers, servers and connections. Iḿ running DIAL on the repeater and get this when I try to connect. Does anyone know what this is telling me? Salt_Flat*CLI> rpt fun 43934 *344297 -- Hungup 'DAHDI/pseudo-1436964590' [Jan 18 23:40:55] NOTICE[706]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/70.3.245.18:4569-4594' -- Hungup 'DAHDI/pseudo-124342271' -- <DAHDI/pseudo-1452253788> Playing 'rpt/node' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/4' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/4' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/2' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/9' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/7' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'rpt/connection_failed' (language 'en') Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 chrisviningre(a)gmail.com Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre

2 1

DTMF
by Bruce B Isaacson 17 Jan '17

17 Jan '17

Hello, DTMF tones not being received to control node all else working. Would appreciate it if someone can head me in the right direction. Thanks, 73s Bruce

3 2

Unable to trigger radio from Allstarlink
by Bruce B Isaacson 17 Jan '17

17 Jan '17

Please disregard. The problem was in simpleusb.conf. I changed carrierfrom=usb to usbinvert Thank you, 73s Bruce Hello, I almost have my node going however: 1. I can transmit to my radio using my HT and receive on my computer when I am connected to the node. 2. I can trigger a test tone to the radio and receive it on my HT when using simpleusb-tune-menu "f" key. 3. I cannot trigger the radio from Allstarlink Web Tranceiver and receive it on my HT Appears to be a software problem and any advice will be appreciated. Want to thank all you folks out there for your past help and in particular David KE6UPI 73s Bruce

1 0

Unable to trigger radio from Allstarlink
by Bruce B Isaacson 17 Jan '17

17 Jan '17

Hello, I almost have my node going however: 1. I can transmit to my radio using my HT and receive on my computer when I am connected to the node. 2. I can trigger a test tone to the radio and receive it on my HT when using simpleusb-tune-menu "f" key. 3. I cannot trigger the radio from Allstarlink Web Tranceiver and receive it on my HT Appears to be a software problem and any advice will be appreciated. Want to thank all you folks out there for your past help and in particular David KE6UPI 73s Bruce

1 0

Stats Server Down
by Tim Sawyer 15 Jan '17

15 Jan '17

It appears that the provider hosting the stats server (stats.allstarlink.org) has experience an upstream network outage. There is no estimated time of repair at this time. We'll post any further details as we have them. Thank you for being patient. -- Tim

1 1

Cannot Receive Connections or Make Connections to Other Allstar Nodes
by Bruce B Isaacson 15 Jan '17

15 Jan '17

Hello, The following was taken from: http://docs.allstarlink.org/drupal/node/163 Is Asterisk Running? Type asterisk -r at the shell prompt, and see if you can access the Asterisk CLI. If you can access the asterisk CLI, then watch the console output while trying to connect and note what happens. if there is no output, proceed to the next thing to try. If there is output, not what errors or warnings you see on the console and ask a question about them on the mailing list. Please note that the error message: WARNING[5765]: file.c:xxxx waitstream_core: Unexpected control subclass '13' is a expected warning Receive this Connected to Asterisk 1538 currently running on JamestownNY (pid = 758) JamestownNY*CLI> Connectivity issues? Try issuing a ping command from the shell to something on your local network. If that works, try pinging google.com.If you get an error that google.com can't be found, check your DNS server settings in /etc/resolv.conf to see if they are correct. If they are incorrect, correct them, save the file, and reboot. If you are running Limey Linux and you change the IP addresses in /etc/resolv.conf, don't forget to run the svcfg command from the shell prompt. root@JamestownNY:~# ping google.com PING google.com (172.217.1.46) 56(84) bytes of data. 64 bytes from ord37s07-in-f14.1e100.net (172.217.1.46): icmp_seq=1 ttl=55 time=27.5 ms 64 bytes from ord37s07-in-f14.1e100.net (172.217.1.46): icmp_seq=2 ttl=55 time=27.3 ms 64 bytes from ord37s07-in-f14.1e100.net (172.217.1.46): icmp_seq=3 ttl=55 time=27.9 ^C Do you have a current rpt_extnodes file? Check to see that rpt_extnodes exists in the /var/lib/asterisk directory. Change directories to /var/lib/asterisk: cd /var/lib/asterisk. Type ls and make sure the file rpt_extnodes is listed. If it is not listed, you may have a problem with node registration, an invalid node number or bad password. Check your registration settings in /etc/iax.conf to see if they are correct. Do not have "rpt_extnodes" Registration issues? Does your node number show on a green background on allstarlink.org?. If not, your node may not be registering properly to register.allstarlink.org. Check the registration statement in /etc/asterisk/iax.conf and make sure the node number and password are correct register =A41408:@385621register.allstarlink.org <mailto:A41408%3A@385621register.allstarlink.org> I have tried it with and without the A preceding the node number. Do not show up on stats.allstarlink.org Probably something small and simple on my end but after installing Debian Allstarlink on a Debian desktop around three or four times and I am at my wits end. Thank you for your time and effort, Bruce Isaacson W2BBI 73s

1 0

SwissArmy Script
by Jamey Wright 14 Jan '17

14 Jan '17

I was looking at the Swissarmy script by K0KN and it does a lot of useful thing that I want to do so I loaded it to one of my nodes running DIAL. Bear in mind that I am not an expert in Linux. I can find my way around but installing and running things still requires detailed instructions and swissarmy is lacking there. I followed the instructions in the readme to get it on my system: wget http://www.qsl.net/k0kn/swissarmy chmod 750 swissarmy Now what? I added the lines connpgm=/etc/asterisk/swissarmy 1 discpgm=/etc/asterisk/swissarmy 0 like the readme says to do. There is no swissary.conf file. Do I create it manually. Looking for the file for private nodes info I looked in /dev/shm for allstar_nodelist. Nothing there. I feel like I have missed some step but I don't know what it is Jamey Wright - WR4JW

1 0

IAXRPT computer speaker audio missing
by DuaneVT . 12 Jan '17

12 Jan '17

Win 7 pro desktop computer. IAXRPT is installed and connected to my remote node. Options are all outputs to Realtek HD speakers. When I connect or ask node for status, I see the IAXRPT client output slider follow the sound, so the client is seeing the node audio. No speaker sound. Now...if I click CONNECT button on the client screen, I do hear the error beep-boop error tone on the speakers. I now have the IAXRPT slider tab on the Win7 sound mixer and I can control the volume with the Win7 sound mixer slider. All other computer speaker sounds are normal. Allstarlink VoIP portal connected to the node has normal speaker as does Zoiper. Thanks, Duane KA1LM

1 0

need 16 digit DMTF IAX client for Iphone
by Neil k8it 11 Jan '17

11 Jan '17

Need 16 digit DTMF IAX client for Iphone Zoipper and Linphone only supports a 12 digit DTMF pad. I need a 16 digit DTMF pad to send the 'A' 'B' 'C' 'D'digits Does anybody know of any? Thanks 73 Neil Sablatzky K8IT Allstar Node 41838 KITLINK Allstar Node 42087 KITLINK HUB IRLP Node exp0068 Echolink K8IT-L WIRES-X K8IT 11479 Room 21479

4 4