- App_rpt-users - lists.keekles.org

testing
by Bryan Fields 24 Jan '17

24 Jan '17

please ignore -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

1 0

DIAL adding a user
by Robert Newberry 24 Jan '17

24 Jan '17

I am adding adding a user login to my system. When I ssh in my prompt is "$" I am not used to seeing this from working with other distributions. Is this correct? When I type su to change to root, I get this root@repeater:/home/user# I feel like I've done something wrong here. -- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

2 1

Bind echolink channel driver to 2 nodes?
by KM6HK 24 Jan '17

24 Jan '17

I just enabled a private node on my CentOS install. The main public node #41477 is currently bound to the echolink channel driver. How do I also concurrently bind it to the other private node #1477 as well as 41477? The entry in the echolink.conf file is: astnode=41477 can one do astnode=41477,1477 ;or some such kludge? Any Help appreciated. -KM6HK

3 3

DMK-URI
by Bruce B Isaacson 23 Jan '17

23 Jan '17

Hello, I am having trouble receiving audio into Allstar. I can hear audio from Allstar. Tested audio on pins 21 and 20 on the connector going into the URI and audio is coming in perfectly. That leaves me with the problem of getting the audio through the DMK Uri to the computer and on to Allstar. Made up a loop back cable for the Uri and received the following and not sure what to think about the results I received. To me it appears that the audio is in the tank and not working but I am not sure of all the other results. Any input will be appreciated from anyone having had to do the same test. Upon opening the Uri I get the following: Found CM119 USB Radio Interface at 002/003 (This is the bus and port the Uri appears on} Unable to re-open DSP device 1: /dev/dsp1 The Left Channel Test and Right Channel test are all like what is shown below only with differing frequencies. Level at 1004.0 Hz: 0.0 mV (RMS) 0.0 mV (P-P) Level at 204.0 Hz: 0.0 mV (RMS) 0.0 mV (P-P) (Same results for test for test 3 to 99) Test T Enter your selection: T Testing digital I/O (PTT,COR,TONE and GPIO).... Digital I/O passed!! Testing Analog at 204 (and 700) Hz... Analog level on left channel for 204.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 504 (and 700) Hz... Analog level on left channel for 504.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 1004 (and 700) Hz... Analog level on left channel for 1004.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 2004 (and 700) Hz... Analog level on left channel for 2004.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 3004 (and 700) Hz... Analog level on left channel for 3004.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 5004 (and 700) Hz... Analog level on left channel for 5004.0 Hz (0.0) is out of range!! Must be between 93.6 and 140.4 Analog level on right channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 700 (and 204) Hz... Analog level on left channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 204.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 700 (and 504) Hz... Analog level on left channel for 700.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Analog level on right channel for 504.0 Hz (0.0) is out of range!! Must be between 440.0 and 660.0 Testing Analog at 700 (and 1004) Hz... Test i Enter your selection:i Testing digital I/O (PTT,COR,TONE and GPIO).... Digital I/O passed!! Thank you for your time! Very much appreciated.

2 1

proxy server
by Robert Newberry 23 Jan '17

23 Jan '17

I built up a portable node. I came across this webpage https://allstarlink.org/proxy.html. I thought about making the server my node at a site with a direct fiber connection. Its good solid, stable internet. This seems like a good way to use resources I already have available to be able to use my portable node on the road. Has anyone done this before? Are the instructions good, or anything you would do differently? -- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 4

Nextion setup
by David KE6UPI 23 Jan '17

23 Jan '17

Is anyone using the nextion 2.4 display? If so I would like to get a copy of your file and any setup info you might have. Thanks, David KE6UPI

2 4

cron
by Robert Newberry 22 Jan '17

22 Jan '17

On my node running dial, I wanted to add some functions to the cron. I did a file search and came up with a couple of hits. Does anyone know which one I should be working in. I did try docs.allstarlink.org but it seemed to be down. N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com

3 2

ACID Upgrade issue
by Ramesh Dhami 20 Jan '17

20 Jan '17

Hi Guys: Starting a new thread.... While updating app_rpt on my hub server; while I thought everything updated, I just tried again and see that there were errors: chan_pi.c: In function ‘GPIODirection’: chan_pi.c:480: warning: implicit declaration of function ‘i2c_smbus_read_byte_data’ chan_pi.c:490: warning: implicit declaration of function ‘i2c_smbus_write_byte_data’ chan_pi.c: In function ‘load_module’: chan_pi.c:3086: error: ‘I2C_SLAVE’ undeclared (first use in this function) chan_pi.c:3086: error: (Each undeclared identifier is reported only once chan_pi.c:3086: error: for each function it appears in.) make[2]: *** [chan_pi.o] Error 1 make[2]: Leaving directory `/usr/src/astsrc/asterisk/channels' make[1]: *** [channels] Error 2 make[1]: Leaving directory `/usr/src/astsrc/asterisk' make: [upgrade-acid] Error 2 (ignored) mkdir -p /var/lib/asterisk/sounds/rpt cp -a sounds/* /var/lib/asterisk/sounds I followed the following instructions on the allstarlink website: For the ACID distribution (and other Linux platforms): cd /usr/src rm -rf astsrc wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv mv trunk astsrc cd astsrc make upgrade-acid This server is in a Hospital DC and also running other stuff, a D-STAR reflector and ircddb server s/w, so updating it to Debian, etc., is not an option. Help! Thanks, Ramesh.

1 0

Allmon Issue
by Ramesh Dhami 20 Jan '17

20 Jan '17

Hi Guys: I have a server running 2 hub nodes; I have allmon running on the same server. In allmon.ini I have 2 stanza's one for each hub node... same login credentials. On the asterisk CLI, I am seeing authentication errors from manager.conf The allmon dashboard shows stats perfectly fine for one of my nodes, the 2nd node, the one that seems to be giving authentication errors, has the following message on the allmon dashboard: Get node sawSta failed! I have tried a separate user account (in allmon.ini and manager.conf for each node - but I am seeing the same issue. Appreciate some pointers! Thanks, Ramesh, VA3UV

3 4

Re: [App_rpt-users] App_rpt-users Digest, Vol 95, Issue 25
by Tom 19 Jan '17

19 Jan '17

You're on the list Brian. Tom -----Original Message----- From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request(a)ohnosec.org Sent: Thursday, January 19, 2017 11:00 AM To: app_rpt-users(a)ohnosec.org Subject: App_rpt-users Digest, Vol 95, Issue 25 Send App_rpt-users mailing list submissions to app_rpt-users(a)ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)ohnosec.org You can reach the person managing the list at app_rpt-users-owner(a)ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: What? this? (Ken) 2. GPS Time Period Elapsed tried 9600 baud (Skyler F) 3. Re: GPS Time Period Elapsed tried 9600 baud (Jesse Lloyd) ---------------------------------------------------------------------- Message: 1 Date: Thu, 19 Jan 2017 09:50:52 -0500 From: "Ken" <ke2n(a)cs.com> To: "'Chris Viningre'" <chrisviningre(a)gmail.com>, <app_rpt-users(a)ohnosec.org> Subject: Re: [App_rpt-users] What? this? Message-ID: <03e501d27263$6ec504a0$4c4f0de0$(a)cs.com> Content-Type: text/plain; charset="utf-8" I am guessing there is a problem with your node registration Looking here https://allstarlink.org/nodelist.php your node is the only one in the whole list highlighted in orange and it has the status message: "Node 44297 is no longer in the database" Ken -----Original Message----- From: Chris Viningre [mailto:chrisviningre@gmail.com] Sent: Thursday, January 19, 2017 1:53 AM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] What? this? I am trying to connect my repeater to one of my other nodes. There is no problem connecting to other nodes. They are on two different computers, servers and connections. I? running DIAL on the repeater and get this when I try to connect. Does anyone know what this is telling me? Salt_Flat*CLI> rpt fun 43934 *344297 -- Hungup 'DAHDI/pseudo-1436964590' [Jan 18 23:40:55] NOTICE[706]: chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response -- Hungup 'IAX2/70.3.245.18:4569-4594' -- Hungup 'DAHDI/pseudo-124342271' -- <DAHDI/pseudo-1452253788> Playing 'rpt/node' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/4' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/4' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/2' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/9' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'digits/7' (language 'en') -- <DAHDI/pseudo-1452253788> Playing 'rpt/connection_failed' (language 'en') Chris Viningre 70 W. Roadrunner Salt Flat, Texas 79847 C:(915) 504-1510 chrisviningre(a)gmail.com Amateur Radio Operator: WS5B https://www.qrz.com/db/ws5b http://www.reverbnation.com/chrisviningre ------------------------------ Message: 2 Date: Thu, 19 Jan 2017 09:05:06 -0700 From: Skyler F <electricity440(a)gmail.com> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org> Subject: [App_rpt-users] GPS Time Period Elapsed tried 9600 baud Message-ID: <CAJNyT08XFP7SFMqv8_p9s0OwYoRDBjwZn-tGN_Nhj2UHkrrZEA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Well, eliminating the network switch seemed to dramatically improve our voter system issue. The host didn't randomly get lost, in turn making the RTCM go offline for a second and come back online. I thought it solved the problem until the next day, I started to randomly hear the voter go offline again and come back on. It has been very difficult to be logged into the RTCM while the problem happens, but I think I got it once, and I am getting the old GPS time period elapsed message. So we are obviously getting an OK GPS data, I am not getting this error every minute, it happens anywhere from once every hour to once every day. Can someone explain why changing the data rate to 9600 baud is not working for us on any of the 4 GPS units, but it is fine for everyone else? Another thing I am confused about is firmware, So these GPS-18 serial units have a firmware in them? And if so, would upgrading/downgrading affect the data? I am assuming we are getting proper NMEA because I don't think an improper format would give us 99% operation. 73 Skyler KD0WHB

1 0