- App_rpt-users - lists.keekles.org

DIAL URI Issue (URI vs URIx)
by Matt Brennan 11 Jan '16

11 Jan '16

Good Day, I am helping work on a machine that I setup with ACID about 7 years ago. The machine that ACID was running on died a few days ago, and we are trying to replace it with a new machine running DIAL. We got the machine setup without issue, however we are having issues getting DIAL to use the URI (note, this is a URI, not a URIx). We can get audio from Asterisk into the repeater, however we don't seem to get any audio or COR back from the repeater. The device was 100% working before the machine failed. As a test, we connected a URIx that we had for another project and that worked without issue. We're assuming there's a difference in the URI from the URIx (I know it's CM108 vs CM119) and the way Asterisk / App_rpt interacts with it. Anyone able to help with what we need to change to get this working? 73 and thanks, Matt, NM1B

3 3

Hub with no hardware connected in ttransmit
by Tower DIVA 10 Jan '16

10 Jan '16

Question all, What would cause a HUB setup with no USB radio hardware hooked up go into constant timeout and Transmit? I got the info off of status of allstar node 41269. It also will not allow connections to happen and i confirmed port forwarding. Ideas? Keri KB0YNA Mrs. Keri Varela

3 2

Re: [App_rpt-users] Anyone have DIAL running on a neoware C10 thin client?
by Steve Zingman 10 Jan '16

10 Jan '16

Nope. I have a 4gb DOM in it. Plug in the DIAL USB installed and go. It just works 73, Steve N4IRS Sent via smoke signal (Verizon) On Jan 9, 2016 11:43 PM, ssedgwick <ssedgwick(a)suddenlink.net> wrote: Steve, Did you have to do anything special when you installed DIAL on the CA22? Thanks, Steve_WB8GRS I'm running 24 x 7 on a C22 On 01/09/2016 04:44 PM, REDBUTTON_CTRL wrote: >* Has anyone been successful putting DIAL on a neoware C10 thin client? *>>* thanks, *>>* Jon VA3RQ* _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 2

Anyone have DIAL running on a neoware C10 thin client?
by ssedgwick 09 Jan '16

09 Jan '16

Steve, Did you have to do anything special when you installed DIAL on the CA22? Thanks, Steve_WB8GRS I'm running 24 x 7 on a C22 On 01/09/2016 04:44 PM, REDBUTTON_CTRL wrote: > Has anyone been successful putting DIAL on a neoware C10 thin client? > > thanks, > > Jon VA3RQ

1 0

Re: [App_rpt-users] DIAL and IRLP
by Mark Guibord 09 Jan '16

09 Jan '16

We'll have to wait and see how they react when it becomes widespread, my point was it's their network and I respect that. From: Steve Zingman [mailto:szingman@msgstor.com] Sent: Saturday, January 09, 2016 12:19 PM To: Mark Guibord Cc: app_rpt-users(a)ohnosec.org; Kirk Just Kirk Subject: Re: [App_rpt-users] DIAL and IRLP Not sure that will last. The case can be made for the fact it's their network to govern as they see fit. My DMR repeaters have DMR-MARC, DCI and BrandMeister all available to my users. Sent via smoke signal (Verizon) On Jan 9, 2016 2:41 PM, Mark Guibord <mark(a)micro-node.com> wrote: And the reasoning behind D-Marc restricting DMR+ / Brandmeister traffic on there network is??? Sent from my iPhone On Jan 9, 2016, at 10:40 AM, Kirk Just Kirk <wb6egr(a)gmail.com> wrote: Yes Steve thats true, and we don't have to rely on IRLP to link sites anymore. We can have high performance, and agility or sit on the side of the road with a blown headgasket...we have a choice. Guess which is which :) On Sat, Jan 9, 2016 at 10:17 AM, Steve Zingman <szingman(a)msgstor.com> wrote: It's their infrastructure. Their key exchange. Their reflectors. It is their network. On 01/09/2016 01:05 PM, Bryan Fields wrote: On 1/9/16 12:59 PM, Steve Zingman wrote: Kirk is correct. IRLP on AllStar is no longer supported. It can be done, but it's NOT supported. It's their network, if they don't want our traffic, respect that. But the thing is, it's not their network. It's all individual repeaters, and the traffic is peer to peer, it's not transverseing IRLP servers. If some one wants to restrict a given node from connecting to their node, I don't take issue with that, but I'll be damned if some one else is going to tell me who can connect to my node. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

5 4

Anyone have DIAL running on a neoware C10 thin client?
by REDBUTTON_CTRL 09 Jan '16

09 Jan '16

Has anyone been successful putting DIAL on a neoware C10 thin client? thanks, Jon VA3RQ

2 1

Re: [App_rpt-users] DIAL and IRLP
by Mark Guibord 09 Jan '16

09 Jan '16

We'll have to wait and see how they (DMR-MARC) responds when it becomes widespread, my point was it's their network and I respect that. From: Steve Zingman [mailto:szingman@msgstor.com] Sent: Saturday, January 09, 2016 12:19 PM To: Mark Guibord Cc: app_rpt-users(a)ohnosec.org; Kirk Just Kirk Subject: Re: [App_rpt-users] DIAL and IRLP Not sure that will last. The case can be made for the fact it's their network to govern as they see fit. My DMR repeaters have DMR-MARC, DCI and BrandMeister all available to my users. Sent via smoke signal (Verizon) On Jan 9, 2016 2:41 PM, Mark Guibord <mark(a)micro-node.com> wrote: And the reasoning behind D-Marc restricting DMR+ / Brandmeister traffic on there network is??? Sent from my iPhone On Jan 9, 2016, at 10:40 AM, Kirk Just Kirk <wb6egr(a)gmail.com> wrote: Yes Steve thats true, and we don't have to rely on IRLP to link sites anymore. We can have high performance, and agility or sit on the side of the road with a blown headgasket...we have a choice. Guess which is which :) On Sat, Jan 9, 2016 at 10:17 AM, Steve Zingman <szingman(a)msgstor.com> wrote: It's their infrastructure. Their key exchange. Their reflectors. It is their network. On 01/09/2016 01:05 PM, Bryan Fields wrote: On 1/9/16 12:59 PM, Steve Zingman wrote: Kirk is correct. IRLP on AllStar is no longer supported. It can be done, but it's NOT supported. It's their network, if they don't want our traffic, respect that. But the thing is, it's not their network. It's all individual repeaters, and the traffic is peer to peer, it's not transverseing IRLP servers. If some one wants to restrict a given node from connecting to their node, I don't take issue with that, but I'll be damned if some one else is going to tell me who can connect to my node. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] DIAL and IRLP
by Steve Zingman 09 Jan '16

09 Jan '16

Not sure that will last. The case can be made for the fact it's their network to govern as they see fit. My DMR repeaters have DMR-MARC, DCI and BrandMeister all available to my users. Sent via smoke signal (Verizon) On Jan 9, 2016 2:41 PM, Mark Guibord <mark(a)micro-node.com> wrote: And the reasoning behind D-Marc restricting DMR+ / Brandmeister traffic on there network is??? Sent from my iPhone On Jan 9, 2016, at 10:40 AM, Kirk Just Kirk <wb6egr(a)gmail.com> wrote: Yes Steve thats true, and we don't have to rely on IRLP to link sites anymore. We can have high performance, and agility or sit on the side of the road with a blown headgasket...we have a choice. Guess which is which :) On Sat, Jan 9, 2016 at 10:17 AM, Steve Zingman <szingman(a)msgstor.com> wrote: It's their infrastructure. Their key exchange. Their reflectors. It is their network. On 01/09/2016 01:05 PM, Bryan Fields wrote: On 1/9/16 12:59 PM, Steve Zingman wrote: Kirk is correct. IRLP on AllStar is no longer supported. It can be done, but it's NOT supported. It's their network, if they don't want our traffic, respect that. But the thing is, it's not their network. It's all individual repeaters, and the traffic is peer to peer, it's not transverseing IRLP servers. If some one wants to restrict a given node from connecting to their node, I don't take issue with that, but I'll be damned if some one else is going to tell me who can connect to my node. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

Re: [App_rpt-users] DIAL and IRLP
by Mark Guibord 09 Jan '16

09 Jan '16

And the reasoning behind D-Marc restricting DMR+ / Brandmeister traffic on there network is??? Sent from my iPhone > On Jan 9, 2016, at 10:40 AM, Kirk Just Kirk <wb6egr(a)gmail.com> wrote: > > Yes Steve thats true, and we don't have to rely on IRLP to link sites anymore. > We can have high performance, and agility or sit on the side of the road with a blown headgasket...we have a choice. > Guess which is which :) > > > >> On Sat, Jan 9, 2016 at 10:17 AM, Steve Zingman <szingman(a)msgstor.com> wrote: >> It's their infrastructure. Their key exchange. Their reflectors. It is their network. >> >>> On 01/09/2016 01:05 PM, Bryan Fields wrote: >>>> On 1/9/16 12:59 PM, Steve Zingman wrote: >>>> Kirk is correct. IRLP on AllStar is no longer supported. It can be done, >>>> but it's NOT supported. It's their network, if they don't want our >>>> traffic, respect that. >>> But the thing is, it's not their network. It's all individual repeaters, and >>> the traffic is peer to peer, it's not transverseing IRLP servers. >>> >>> If some one wants to restrict a given node from connecting to their node, I >>> don't take issue with that, but I'll be damned if some one else is going to >>> tell me who can connect to my node. >> >> -- >> "Anything is possible if you don't know what you are talking about." >> 1st Law of Logic >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

1 0

DIAL and IRLP
by R. Wayne 09 Jan '16

09 Jan '16

Is it possible to bridge DIAL and IRLP like the old ACID distro?

5 9