- App_rpt-users - lists.keekles.org

Questions about iax.conf
by ronald simpson 17 Aug '14

17 Aug '14

Hi guys, Is it possible to define what nodes on a multinode server use different codecs? For instance I want the following: Node 28412 to encode ilbc(I have recompiled to run this codec) Node 28413 to use ilbc/g726aal2 Node 28414 to use gsm Node 28415 to use gsm Node 28426 to use gsm I use these 5 nodes to monitor or talk out to many other larger node systems. When all are connected, the bandwidth goes up. I am trying to keep the bandwidth down as I have a very variable connect speed out here in the sticks. So the question is can each node be defined in iax.conf to codecs I want to use? Ron, N6GKJ

1 0

Re: [App_rpt-users] Web transceiver node display
by mike＠midnighteng.com 17 Aug '14

17 Aug '14

1 0

Re: [App_rpt-users] Web transceiver node display
by Bryan Fields 17 Aug '14

17 Aug '14

On 8/17/14, 12:57 AM, Tim Sawyer wrote: > Well, I thought I did. But all I have is the jar file. I’ll see if I can > rattle the Java tree and get it. At the risk of offending, perhaps it's time we look at moving away from the Java web client. My understanding is the Java client is basically a modified SIP client. There are SIP HTML5 clients out there we could build off of. Perhaps something like this: http://sipml5.org could be modified for our use? I'm not a programer, but I'd be willing to throw a donation to who ever can make it work to replace the current client. Thoughts? -- Bryan Fields 727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net

2 1

Issue with simplex node
by Wayne 16 Aug '14

16 Aug '14

HI all, Wondering if anyone may have experienced a similar problem. My simplex node operating duplex=1 (w/telemetry) will unkey and transmit in the middle of entering dtmf tones to it. For example as I'm enter *3node it will unkey at the star or sometimes at the 3 and sometimes at the end of the string at the last number and then sometimes it will work. Also, there are times I can be talking on the node and right in the middle of my transmission it will drop then come back when it goes back to receive. This has been baffling me for sometime. Setup: Desktop computer DMK URI Icom f6011 mobile Thanks Wayne Kh6mei --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

3 2

Re: [App_rpt-users] Multiple servers - any config needed in *.conf
by Tim Sawyer 16 Aug '14

16 Aug '14

Something went wrong. Probably best to do the install over. See: http://ohnosec.org/drupal/node/67 -- Tim :wq On Aug 15, 2014, at 7:39 PM, Mark Johnston <markjohnston73(a)gmail.com> wrote: > Some reason it did not prompt me... Not even to login > > On Aug 15, 2014 7:38 PM, "Tim Sawyer" <tim.sawyer(a)mac.com> wrote: > When you run the installer on the server ti will prompt you to login to your Allstar account and then give you a list of your server. Just choose the one you want. > > -- > Tim > :wq > > On Aug 15, 2014, at 6:21 PM, Mark Johnston <markjohnston73(a)gmail.com> wrote: > >> Is there any need/way to configure which server is which in the .conf files? >> How does the allstar system know which one is which otherwise. >> >> I have two servers at physically different locations, thus different public IP's... >> wanted to make sure everything was setup correctly - I did create the 'server' on the allstar site. Is there something I have to do on each server to define it for allstar or just move the nodes across... >> >> Been having some strange behavior since setting up the second server, had to restart asterisk a lot, and nodes quit responding... not sure if it is at all related. >> >> >> >> 73 >> >> Mark KC7DMF >> <server-config-allstar.png>_______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >

2 1

Linking to other server/nodes behind router
by kk6ecm 15 Aug '14

15 Aug '14

I have a couple of servers/nodes behind my router which I can link to others on different public IP addresses, but am having difficulty linking behind my router. I have unique UDP port addresses, which are registered at the Allstarlink.org website for each server. I want to use iaxRpt to perform the linking, and understand I need to use <IP address>:<UDP Port number> in iaxRpt for connecting outside, but it does not seem to work with our without the ":<UDP port number> in iaxRpt... not sure what I'm missing here. Thanks, Bob kk6ecm Sent from iPad

2 3

Multiple servers - any config needed in *.conf
by Mark Johnston 15 Aug '14

15 Aug '14

Is there any need/way to configure which server is which in the .conf files? How does the allstar system know which one is which otherwise. I have two servers at physically different locations, thus different public IP's... wanted to make sure everything was setup correctly - I did create the 'server' on the allstar site. Is there something I have to do on each server to define it for allstar or just move the nodes across... Been having some strange behavior since setting up the second server, had to restart asterisk a lot, and nodes quit responding... not sure if it is at all related. 73 Mark KC7DMF

2 1

Re: [App_rpt-users] startup_macro
by mike＠midnighteng.com 15 Aug '14

15 Aug '14

2 1

Re: [App_rpt-users] Linking to other server/nodes behind router
by mike＠midnighteng.com 15 Aug '14

15 Aug '14

2 1

startup_macro
by Doug Crompton 15 Aug '14

15 Aug '14

I have a question on the startup_macro and calling a system script. The following does not seem to work. How do you call a system command from startup_macro? Perhaps the cmd, is left off? This does not seem clear in the documentation. I never really had a need to use this until lately. startup_macro=cmd,/etc/asterisk/some_script 73 Doug WA3DSP http://www.crompton.com/hamradio

3 2