- App_rpt-users - lists.keekles.org

ddclient.conf help
by Michael Miller 29 May '14

29 May '14

I need help setting up ddclient for DYNDNS for remote RTCM client. Is there a web site? Thanks Mike N6IQY 27522 node

2 1

more on bulletin playback
by Ken 28 May '14

28 May '14

I am using politeid http://ohnosec.org/drupal/node/128 and idtime as well. It seems to play a cw id right over the recording, without problems, and without any need to drop the carrier. But I always insert a voice ID every 10 minutes, or less, into the recording file anyway - usually in the place provided by the recording context. I also have a DTMF function where any user can stop the playback, if he needs to. I advertise this function periodically in tail messages. 73 Ken > -----Original Message----- > From: Buddy Brannan [mailto:buddy@brannan.name] > Sent: Wednesday, May 28, 2014 2:46 PM > To: Ken > Cc: app_rpt mailing list > Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 63, Issue 54 > > The only problem with playing a long file continuously like this (for instance, > using asterisk -rx "rpt localplay 2331 foo" > > is that the repeater won't ID until the file finishes playing. Forcing an ID to > play also doesn't seem to accomplish the desired result. > > At least, that's what happens on my system. > > Of course, once the file finishes, the ID fires, but for a file that's longer than > 10 minutes, this could really be a problem.so.you'll probably want to break > the file up anyway. > > On May 28, 2014, at 1:59 PM, Ken <ke2n(a)cs.com> wrote: > > > >You might want to look at mp3splt to cut it up into manageable chunks. > > > > > > > > >Unless you turn the TX time out off, you're going need to drop PTT now > and then to reset the timer. > > > > > > > > -- > > > > Another possibility is to use a script to put the machine in "bulletin mode" > where the time out timer is disabled or at least set to a long time. The same > script turns the TOT back on again at the end (so you don't forget). > > 73 > > Ken > > > > > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > To unsubscribe from this list please visit http://ohnosec.org/cgi- > bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the > page. Enter your email address and press the "Unsubscribe or edit options > button" > > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem.

2 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 63, Issue 54
by Ken 28 May '14

28 May '14

>You might want to look at mp3splt to cut it up into manageable chunks. >Unless you turn the TX time out off, you're going need to drop PTT now and then to reset the timer. -- Another possibility is to use a script to put the machine in "bulletin mode" where the time out timer is disabled or at least set to a long time. The same script turns the TOT back on again at the end (so you don't forget). 73 Ken

2 1

RTCM
by Michael Miller 27 May '14

27 May '14

I need some help connecting a RTCM and my server remotely thru DYNDNS . My ISP blocked all my incoming ports so I am trying to use my server remotely with all ports open and connect to my RTCM behind closed ports , any help would be welcomed. Thanks Mike N6IQY node 27522

1 0

Playing mp3 files in app_rpt?
by Bob 27 May '14

27 May '14

Is it possible to play mp3 formatted messages over the radio using the schedule stanza in rpt.conf? If so, what is required? Thanks, Bob kk6ecm

6 5

next dumb question...re-compile asterisk in Limey
by George Csahanin 26 May '14

26 May '14

My memory is telling me that in a limey install it is possible to re-compile from the source. Just tried it and fails claiming cannot find g++ Didn’t this used to work? Is something missing from busybox?? GeorgeC George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel

2 1

Dial-up on the BeagleBone Black
by James R. Pilgram 26 May '14

26 May '14

Aloha from Kauai, Just wondering if anyone else besides me has tried to dial into the BeagleBone Black using the Allstar Telephone Portal. I get as far as the last command and Allison says "Please Wait While You're Being Connected" then I get a busy signal. Is there any place I should be looking for anything special in a .conf that may be missing ? I'm not even sure where to look or what to look for. Can someone point me in the right direction and give me a push. As a side note, I have other normal nodes under club call signs I have no problem dialing into. Jim Pilgram NH6HI

1 0

Re: [App_rpt-users] Incoming link connection volume
by Jim Duuuude 26 May '14

26 May '14

Gosh.. gee... I would have NEVER guessed that he was asking that..... If you adjust your LOCAL audio levels properly, THIS SHOULDNT HAPPEN!!! In no way, shape or form, should there be a reason to have to adjust the levels (inbound or outbound) of other Allstar links. Everyone adjusts their levels to the same standards. That, in telecom terms, is called a VNL (Via Net Loss) plan (for transmission levels). We have one. We use it. It works. If what you are talking about is OTHER networks, such as connections from Echolink, TLB, etc, that is another story...... Jim WB6NIL From: wd0ekr(a)msn.com To: telesistant(a)hotmail.com Subject: Re: [App_rpt-users] Incoming link connection volume Date: Mon, 26 May 2014 08:50:46 -0600 I think he is asking how to adjust the audio level of the signal coming in over the internet, I would like to know how to do that also. The local audio levels are fine but the incomming internet audio is high ----- Original Message ----- From: Jim Duuuude To: kk6ecm ; app_rpt mailing list Sent: Monday, May 26, 2014 8:45 AM Subject: Re: [App_rpt-users] Incoming link connection volume Sounds like you dont have your rx/tx (local) levels set properly. Jim > From: kk6ecm(a)gmail.com > Date: Mon, 26 May 2014 03:43:40 -0700 > To: app_rpt-users(a)ohnosec.org > Subject: [App_rpt-users] Incoming link connection volume > > Is there a way to adjust the incoming volume of a connected link? Some connections seem to over drive the transmitter? Normal repeater function works quite well. > > Thanks, > Bob > kk6ecm > > Sent from iPad > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

3 4

Turn off link connect announcements
by Michael Miller 26 May '14

26 May '14

Is there a way to turn the announcements of the nodes connecting ans disconnecting in the background? It is probably something simple I am missing . Thanks Mike N6IQY node 27522

2 1

Incoming link connection volume
by kk6ecm 26 May '14

26 May '14

Is there a way to adjust the incoming volume of a connected link? Some connections seem to over drive the transmitter? Normal repeater function works quite well. Thanks, Bob kk6ecm Sent from iPad

2 1