- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Connect SIP Phone to allstarlink box
by Steve Wright 20 May '14

20 May '14

You have quite a few options when connecting SIP phones or other toys to the repeater network. You might add SIP config to the repeater node, and have SIP devices connect to it directly, or add another SIP server nearby and trunk the two machines. I looked at doing the same thing some ago, and I did manage to get SIP devices connecting directly to the repeater node, but it was just an experiment and was never put into service - but I could certainly dial in and connect audio to the node. I think if I was doing the job again, I would experiment with a separate machine for the SIP phone server software - perhaps install one of the commonly available Asterisk distributions for that task, and then peer that machine with the repeater node. This is added machinery, but I think it will make both of the systems much easier to build and maintain. Steve ZL1BHD

2 1

Status 139, signal 11
by Robert Newberry 20 May '14

20 May '14

I haven't worked on my repeater project in a while. Last time I ran my linux box a few months ago everything was fine. I turn it on today and I'm getting a repeating screen of status 139, signal 11. I tried attaching a picture of my screen but no joy on sending pics. I'm using cent os 5.9 on a he compaq Celeron D. Any ideas how to fix this? I hope I've provided enough information. If not I'll do my best to get more.

1 1

Re: [App_rpt-users] Connect SIP Phone to allstarlink box
by mike＠midnighteng.com 20 May '14

20 May '14

6 6

uri stopped working
by Wayne 20 May '14

20 May '14

Any had this happen, my uri just stopped working today. Green light stays solid now, tried on another computer same thing. Took another uri and plugged into my computer worked fine. thanks --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com

3 3

Status of /dl/installcd/centos6
by kk6ecm 19 May '14

19 May '14

What is the status of the /dl/installcd/centos6 build? Thanks, Bob kk6ecm Sent from iPad

2 2

Dayton Connects
by mike＠midnighteng.com 16 May '14

16 May '14

1 0

Tinny transmit audio
by kk6ecm 15 May '14

15 May '14

What could cause the retransmitted audio to sound tinny. It sounds good when playing sound files, but retransmitted audio from the receiver sounds a bit tinny. The radio settings have not changed, just the computer with a new ACID load from the CD. Are there settings that need to be adjusted in the config files? What have I missed? Thanks, Bob kk6ecm Sent from iPad

6 8

Re: [App_rpt-users] How can I see all connected node in IAXRPT
by Ken W4NOC 15 May '14

15 May '14

'xnode' is handy as well. It reveals all associated nodes and webtransceiver connections. rpt xnode <nodenumber> Ken W4NOC example: ... RPT_NUMLINKS=7> RPT_LINKS=7,T27201,T28569,T27139,T29930,T29934,T29956,T40507 RPT_NUMALINKS=3 RPT_ALINKS=3,27201TU,28569TU,27139TU RPT_ETXKEYED=0> RPT_RXKEYED=0I> RPT_AUTOPATCHUP=0 ... > 1. Re: How can I see all connected node in IAXRPT (Tim Sawyer) > > Message: 1 > Date: Wed, 14 May 2014 16:26:33 -0700 > From: Tim Sawyer <tim.sawyer(a)mac.com> > To: VE2JVE <ve2jve(a)hotmail.com> > Cc: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] How can I see all connected node in > IAXRPT > Message-ID: <CF4C5565-8402-4D4C-86AB-6DA419F26890(a)mac.com> > Content-Type: text/plain; charset="us-ascii" > > At the *CLI> rpt lstats <nodeNumber> > > -- > Tim > :wq >

1 0

How can I see all connected node in IAXRPT
by VE2JVE 14 May '14

14 May '14

With the Xelatec version, I can see all connected nodes in the CALL INFORMATION but not with ACID. How can I see all connected nodes with ACID version in Xelatec. WE have created our own Asterisk network.

2 1

How can I see all connected nodes in IAXRPT
by VE2JVE 14 May '14

14 May '14

With the Xelatec version, I can see all connected nodes in the CALL INFORMATION but not with ACID. How can I see all connected nodes with ACID version in Xelatec.

1 0