- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Status of /dl/installcd/centos6
by mike＠midnighteng.com 03 Jun '14

03 Jun '14

1 0

Re: [App_rpt-users] screen off in laptop
by mike＠midnighteng.com 03 Jun '14

03 Jun '14

1 0

screen off in laptop
by ea8ee 03 Jun '14

03 Jun '14

Hi all node allstar use as a laptop computer as this permanent me like that after 5 minutes of inactivity the screen will turn off but as I can not use the copy centos acid

1 0

no audio from URI
by torben＠klimt-online.com 02 Jun '14

02 Jun '14

Hi all, i think i have a little blackout :( I would like to set up a repeater with 2 GM360 - SQL detect is ok - NF to another connectet repeater is ok - DTMF is ok (looks good on console) - PTT is ok BUT there is no audio out from the URI on Port 22 and or 23 :( On a windows machine the URI works fine but on the asterisk there is no output Any ideas ? greetings

1 0

Change node name
by Ken Robinson 02 Jun '14

02 Jun '14

Hi, I'm trying to change my node name from mb7ice to g0lce (UK regulations) I can log on to the website and change the name in settings, submit and it stays changed. However online my node still shows MB7ICE. Is there a way to change the name or is it better to put a new node on Regards Ken G0LCE

1 0

IRLP install script
by Michael Miller 31 May '14

31 May '14

Were can I download ---- irlpsetup.sh ---- script , it is missing on my version of ACID Thanks Mike N6IQY

5 4

get_config.php empty result
by iain macdonnell - N6ML 31 May '14

31 May '14

I'm new to AllStar Link, but not new to Linux and Asterisk. I already run an Asterisk 11 PBX at home. Ideally I'd like to incorporate AllStar Link into that, but to get started for now, I'm trying to get a separate installation with ACID working. It's failing to download my server config. It seems that others have reported problems in the last few weeks. Is it still b0rked? Seems that a config ID exists, but I can't actually get the contents of the config (just get an empty result): [root@test ~]# curl -k 'https://config.allstarlink.org/portal/_config/get_available_configs.php?use…<mypasswd>' <some_randomish_string>,N6ML [root@test ~]# curl -k 'https://config.allstarlink.org/portal/_config/get_config.php?config_id=<some_randomish_string>' [root@test ~]# curl -k 'https://config.allstarlink.org/portal/_config/get_config.php?username=N6ML&…<mypasswd>&config_id=<some_randomish_string>' [root@test ~]# Anyone have a server config (as produced by that php script) somewhere? I'd rather not have to reverse-engineer the entire pcf.sh script.... 73, ~iain / N6ML

1 0

need to exchange some email off line with a Limey Linux guru
by George Csahanin 31 May '14

31 May '14

I thought I had limey all figured out a couple of years back. Maybe not. Having massive issues to get it to compile. Went back to 1.0.7 which I was able to run before. Now fails in the first few lines. Also on another attempt xboard.mk file is complained about, wasn’t formatted right. Just all kinds of what always appear to be script file errors. When it actually compiles a source file that appears to go ok. But that is usually after lots of playing with some script of config file. Anyhow, anyone up for talking me thru these issues? Does buildroot have a problem? Somewhere I saw something about make version 3.82 being a problem, so backed down to 3.81, same thing. Tried using gmake, same thing. George J Csahanin W2DB Cedar Park, TX 512-401-2630 home 401-338-0568 cel

1 0

Playing MP3 bulletins
by Ken 30 May '14

30 May '14

>So... I've been researching several options, finally downloaded the asterisk-addons, and installed. The mp3 download of the ARRL News >plays, however, I'd >like to have the idtalkover=|i<call sign> function as well. I get the Morse Code id at the end of the ARRL News, but not >during at the defined interval. Any ideas? >Thanks, >Bob >kk6ecm ===== OK - I have reported hearing the talkover ID and other people say they don't hear it. It turns out everybody is right. After some experimenting, I found that the node that is playing does not talk-over, but all the connected nodes do (and that is where I often listen). That suggests that you could have an internal (no radio) node that did the playback and link it to the radio node(s). In that case you should hear the talk-over ID on all the connected radios. I do not know if the bulletin node needs to be on a separate PC, but I believe not. The bulletin playback node has no URI and uses: rxchannel = Zap/pseudo ; Rx audio/signalling channel Of course, the other ways to do it (previous postings) are: 1) Split the MP3 into segments and play them in sequence, using a Linux script, with whatever ID you want between the segments 2) Edit the audio file and insert the ID audio into the track itself (what I do) 73/GL Ken

1 0

Simplex link to a DR-1
by pete M 29 May '14

29 May '14

Hi guys. Got part of the Yaesu beta testing of there fusion system repeater. So I took there repeater and unconnected my old MSR-2000. The linking to the DR-1 seem a bit problematic, especialy if used in both digital and analog mode (auto switch). So I was thinking of using a small IC-F121S locally on a dummy load at the repeater site to act as the link on the analog side of the repeater, the IC-F121S will handle all the ctcss encoding/decoding. My problem is how should I program my node so that I wont have a tail nor any courtesy tone. But I want voice ID to work. I know that there are 2 duplex setting. one in the rpt.conf file the other is in usbradio.conf. Anyone can help me figure out what i need to do? one other thing, how can I stopp any message from connect/disconnect to my node aside the one initiated from my node. (already did it on the echolink side.) but want to do it on the allstar side.) Thanks for the help.. Pierre VE2PF

2 1