Doug,
You may wish to try the 'gaindown' script. This will lower the volume of
the connect/disconnect messages. It works well.
http://www.allstarnode.com/viewtopic.php?f=6&t=26
73,
Ken
W4NOC
----- Original Message -----
From: <app_rpt-users-request(a)ohnosec.org>
To: <app_rpt-users(a)ohnosec.org>
Sent: Thursday, December 05, 2013 1:09 AM
Subject: App_rpt-users Digest, Vol 58, Issue 14
> Send App_rpt-users mailing list submissions to
> app_rpt-users(a)ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
> app_rpt-users-request(a)ohnosec.org
>
> You can reach the person managing the list at
> app_rpt-users-owner(a)ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
> 1. Adjusting telemetry levels (Doug Crompton)
> 2. Re: Turn off dis/connect messages but not other telemetry?
> (corrected) (Doug Crompton)
> 3. Re: Turn off dis/connect messages but not other telemetry?
> (corrected) (Tim Sawyer)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 4 Dec 2013 23:40:32 -0500
> From: Doug Crompton <doug(a)crompton.com>
> To: "app_rpt-users(a)ohnosec.org" <app_rpt-users(a)ohnosec.org>
> Subject: [App_rpt-users] Adjusting telemetry levels
> Message-ID: <BLU172-W32F6A2BE101C94ACFF8941BAD70(a)phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I have been trying to think of creative ways to adjust (down) the voice
> telemetry levels. The connected, disconnected, etc. messages are created
> from the Asterisk sounds directory. What I did for my voice ID and other
> short messages was create a batch file to combine the sound files and then
> run the combined file through sox to lower the volume.
>
> In other cases it becomes a little more difficult. I like on the hour time
> messages. The app_rpt time messages are created using the Asterisk say
> commands and code in app_rpt. It is not possible without modifying the
> app_rpt source to change the way it says it or more importantly the
> volume. I like the volume of messages to be somewhat lower than the normal
> QSO audio. So I created a Perl program to emulate the built-in time
> function and then on the fly I adjust the volume and play it.
>
> So far I have most everything under control but the connect/disconnect
> messages which are very annoying. I wish they could be made lower in
> volume also. This could be accomplished by running all the audio files
> they would call through sox to reduce the volume. Then when app_rpt called
> the files they would play at reduced volume. Kind of a crude way to do it
> but it would work. Of course whenever you called the modified files for
> other uses they would be at a reduced volume also.
>
> Interested in what others have done in this regard?
>
> I am attaching my Perl script to replace the app_rpt built-in time in case
> anyone else would like to use it. Instructions for its use are in comments
> in the script.
>
>
> 73 Doug
> WA3DSP
> http://www.crompton.com/hamradio
>
>
Any chance the registration server is down? For some reason, my node in CO
is unable to connect to anyone and it does not show up in the database.
Example: http://stats.allstarlink.org/nodeinfo.cgi?node=27976
Node 27976
Node 27976 is no longer in the database
But if I try to connect to other nodes, I do seem to attempt to make
connections ok, but they fail.
Last login: Wed Dec 4 12:08:53 2013 from 166.205.50.234
Installed and Running Server Packages:
XIPAR - http://www.xelatec.com/xipar
Asterisk - http://www.asterisk.org
FreePBX - http://www.freepbx.org
IP Address = 192.168.0.2
MAC Address = 00:25:64:83:DB:A8
[root@Node27976_WoodlandPark00256483dba8 ~]# ping register.allstarlink.org
PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=1 ttl=56
time=66.4 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=2 ttl=56
time=65.5 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=3 ttl=56
time=66.5 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=4 ttl=56
time=66.3 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=5 ttl=56
time=66.0 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=6 ttl=56
time=65.7 ms
^C
--- register.allstarlink.org ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5790ms
rtt min/avg/max/mdev = 65.594/66.129/66.577/0.383 ms
[root@Node27976_WoodlandPark00256483dba8 ~]# ^C
[root@Node27976_WoodlandPark00256483dba8 ~]# asterisk -r
Asterisk 1.4.28, Copyright (C) 1999 - 2009 Digium, Inc. and others.
Created by Mark Spencer <markster(a)digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for
details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.4.28 currently running on
Node27976_WoodlandPark00256483dba8 (pid = 1631)
Verbosity is at least 99256483dba8*CLI>
Node27976_WoodlandPark00256483dba8*CLI> core set verbose 99
Verbosity is at least 99256483dba8*CLI>
Node27976_WoodlandPark00256483dba8*CLI> rpt fun 27976 *327892
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
-- Call accepted by 99.45.143.74 (format ulaw)
-- Format for call is ulaw
-- Hungup 'IAX2/99.45.143.74:4569-777'
-- Hungup 'DAHDI/pseudo-1878106708'
-- Hungup 'DAHDI/pseudo-1462231487'
-- <DAHDI/pseudo-2063202499> Playing 'rpt/nodenames/27892' (language
'en')
-- <DAHDI/pseudo-2063202499> Playing 'rpt/connection_failed' (language
'en')
-- Hungup 'DAHDI/pseudo-2063202499'
Node27976_WoodlandPark00256483dba8*CLI>
I think one time this happened to me before and it ended up being the
registration server.. Any ideas? Any commands I could try to see the
process flow of registration?
Lu
KA4EPS
I have been trying to think of creative ways to adjust (down) the voice telemetry levels. The connected, disconnected, etc. messages are created from the Asterisk sounds directory. What I did for my voice ID and other short messages was create a batch file to combine the sound files and then run the combined file through sox to lower the volume.
In other cases it becomes a little more difficult. I like on the hour time messages. The app_rpt time messages are created using the Asterisk say commands and code in app_rpt. It is not possible without modifying the app_rpt source to change the way it says it or more importantly the volume. I like the volume of messages to be somewhat lower than the normal QSO audio. So I created a Perl program to emulate the built-in time function and then on the fly I adjust the volume and play it.
So far I have most everything under control but the connect/disconnect messages which are very annoying. I wish they could be made lower in volume also. This could be accomplished by running all the audio files they would call through sox to reduce the volume. Then when app_rpt called the files they would play at reduced volume. Kind of a crude way to do it but it would work. Of course whenever you called the modified files for other uses they would be at a reduced volume also.
Interested in what others have done in this regard?
I am attaching my Perl script to replace the app_rpt built-in time in case anyone else would like to use it. Instructions for its use are in comments in the script.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
Here is a RPT debug dump to perhaps help with analysis (see attached)
From: Lu Vencl [mailto:vencl@att.net]
Sent: Wednesday, December 04, 2013 12:42 PM
To: app_rpt-users(a)ohnosec.org
Subject: Registration server down?
Any chance the registration server is down? For some reason, my node in CO
is unable to connect to anyone and it does not show up in the database.
Example: http://stats.allstarlink.org/nodeinfo.cgi?node=27976
Node 27976
Node 27976 is no longer in the database
But if I try to connect to other nodes, I do seem to attempt to make
connections ok, but they fail.
Last login: Wed Dec 4 12:08:53 2013 from 166.205.50.234
Installed and Running Server Packages:
XIPAR - http://www.xelatec.com/xipar
Asterisk - http://www.asterisk.org
FreePBX - http://www.freepbx.org
IP Address = 192.168.0.2
MAC Address = 00:25:64:83:DB:A8
[root@Node27976_WoodlandPark00256483dba8 ~]# ping register.allstarlink.org
PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=1 ttl=56
time=66.4 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=2 ttl=56
time=65.5 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=3 ttl=56
time=66.5 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=4 ttl=56
time=66.3 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=5 ttl=56
time=66.0 ms
64 bytes from register.allstarlink.org (67.215.233.178): icmp_seq=6 ttl=56
time=65.7 ms
^C
--- register.allstarlink.org ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 5790ms
rtt min/avg/max/mdev = 65.594/66.129/66.577/0.383 ms
[root@Node27976_WoodlandPark00256483dba8 ~]# ^C
[root@Node27976_WoodlandPark00256483dba8 ~]# asterisk -r
Asterisk 1.4.28, Copyright (C) 1999 - 2009 Digium, Inc. and others.
Created by Mark Spencer <markster(a)digium.com <mailto:markster@digium.com> >
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for
details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it
under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.4.28 currently running on
Node27976_WoodlandPark00256483dba8 (pid = 1631)
Verbosity is at least 99256483dba8*CLI>
Node27976_WoodlandPark00256483dba8*CLI> core set verbose 99
Verbosity is at least 99256483dba8*CLI>
Node27976_WoodlandPark00256483dba8*CLI> rpt fun 27976 *327892
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
== Parsing '/var/lib/asterisk/rpt_extnodes': Found
-- Call accepted by 99.45.143.74 (format ulaw)
-- Format for call is ulaw
-- Hungup 'IAX2/99.45.143.74:4569-777'
-- Hungup 'DAHDI/pseudo-1878106708'
-- Hungup 'DAHDI/pseudo-1462231487'
-- <DAHDI/pseudo-2063202499> Playing 'rpt/nodenames/27892' (language
'en')
-- <DAHDI/pseudo-2063202499> Playing 'rpt/connection_failed' (language
'en')
-- Hungup 'DAHDI/pseudo-2063202499'
Node27976_WoodlandPark00256483dba8*CLI>
I think one time this happened to me before and it ended up being the
registration server.. Any ideas? Any commands I could try to see the
process flow of registration?
Lu
KA4EPS
Hey guys
I downloaded iaxrpt
What us needed for this to work with my node I put in my ip password and it don't connect
Thanks
Donny
KK4RJY
Sent from my iPhone5
