- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Arch Linux version of allstar has been stable for 2 weeks now....
by Shane Morris 17 Jan '13

17 Jan '13

Interesting! Certainly smaller than my FitPC, but you knew that, cheaper too. Its a single core 1GHz x86, whereas my FitPC is a dual core 1GHz. I imagine its all passively cooled Eric? I was planning to run Allstar on a single core 1GHz ARM at some point in the future, Anthony mentioned in his first post two weeks ago he hopes to port the software to RaspberryPi (not to bring up the debate again, I'm only mentioning it for completeness - my goal is to run chan_voter, which DOESN'T need USB) and I think it would be simple to port to other ARM platforms, for the sake of argument, the Beagle Board, running newer kernel revisions. My FitPC does get quite warm Eric, even under "no load" conditions. I'm not entirely certain what it would do in 35+ degree Celsius heat in the middle of the Australian bush. I hope "work fine," not "explode"! So that might be a consideration for a totally passively cooled unit. My unit is going to be used to conduct a RTCM network, using chan_voter. None of the USB interfaces will be used, say, for URIs or other sound fobs. It'll be connected to the remote stations by long shot wifi links (Ubiquiti Bullet2s and Loco2s over ethernet). Eric, if you're going to use the USB ports on the 3350-AP, have a look at the structure of the USB hubs inside the computer. That'll tell you alot about whether you can use the sound fob with other devices, or you'll run into issues like the RPi. USB performance is critical, and I'm uncertain what the "on chip" USB ports would be like for such an integrated chipset. I hope this helps - technically, it should run it, from a "raw performance" standpoint. However, the practicality might be a little different. I do hope it works - please let me know how you go, I'm rather interested! That is a cheaper computer than the FitPC! On Fri, Jan 18, 2013 at 8:54 AM, Eric Guth <eric(a)efratnetworks.com> wrote: > Shane, > > What do you think about the eBox 3350-AP for running Allstar? > > 73, > > Eric > 4Z5UG / WA6IGR > Allstar Node: 28422 > 4Z5UG(a)guth.us > Israel Direct: 077-950-9451 > USA Direct: +1-720-377-3840 > Skype: ericrguth > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Shane Morris > Sent: Thursday, January 17, 2013 11:08 PM > To: Anthony Percy > Cc: app_rpt-users(a)ohnosec.org > Subject: Re: [App_rpt-users] Arch Linux version of allstar has been stable for 2 weeks now.... > > This is good news, of course. > > I imagine the Arch Linux with allstar would run on a FitPC-3? This is just an idea of mine at the moment, nothing more. I would like to get the chan_voter module working, in particular. > > I will await the LiveCD. > > Keep up the good work! > > On Thu, Jan 17, 2013 at 5:10 PM, Anthony Percy <anthcp(a)gmail.com> wrote: >> Hi all, >> Just an update, the Arch Linux version of allstar has been stable for >> 2 weeks now on the repeater VK2RCZ. >> If you are happy to compile the allstar code, I have updated my >> modified version to https://github.com/anthcp/Arch-allstar. >> You may still have to fine tune the makefiles like add a symlink for >> the ar library but it does show the code changes.... >> We will make a Live CD in the future sometime.... >> >> Regards >> >> Anthony, VK2ACP >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Arch Linux version of allstar has been stable for 2 weeks now....
by Anthony Percy 17 Jan '13

17 Jan '13

Hi all, Just an update, the Arch Linux version of allstar has been stable for 2 weeks now on the repeater VK2RCZ. If you are happy to compile the allstar code, I have updated my modified version to https://github.com/anthcp/Arch-allstar. You may still have to fine tune the makefiles like add a symlink for the ar library but it does show the code changes.... We will make a Live CD in the future sometime.... Regards Anthony, VK2ACP

4 4

Echolink
by FERNANDO VILLARROEL 17 Jan '13

17 Jan '13

Dear. i did installed follows the how to: http://www.xelatec.com/xippr/sites/default/files/xipbx_install_20100518_235… But when i try to call the node 1999 i receive the following logs: The 'set verbose' command is deprecated and will be removed in a future release. Please use 'core set verbose' instead. -- Accepting AUTHENTICATED call from 192.168.1.101: > requested format = alaw, > requested prefs = (), > actual format = gsm, > host prefs = (ulaw|gsm), > priority = mine localhost*CLI> [Jan 17 00:15:19] NOTICE[4390]: app_rpt.c:17406 rpt_exec: parsing argument=1999 -- Executing [1999@radio-secure:1] Rpt("IAX2/3419-2662", "1999") in new stack [Jan 17 00:15:19] NOTICE[4390]: app_rpt.c:17406 rpt_exec: parsing argument=1999 localhost*CLI> Disconnected from Asterisk server /usr/sbin/safe_asterisk: line 125: 4339 Segmentation fault nice -n $PRIORITY ${ASTSBINDIR}/asterisk -f ${CLIARGS} ${ASTARGS} Asterisk ended with exit status 139 Asterisk exited on signal EXITSTATUS-128. And the /var/log/asterisk/full says: [Jan 17 00:15:23] NOTICE[4394] chan_echolink.c: Total of 0 Echolink instances found I am trying to run my local conections with a Motorola GM300, URI and Asterisk. Anyone could help or why the asterisk crash Regards

1 0

RTCM communications protocol
by davek 16 Jan '13

16 Jan '13

i am curious about the RTCM and how it communicates with asterisk. the manual says its communicates via VOIP. Is there any more specific technical details??

2 1

Switching to app_rpt only no more controler.
by pete M 16 Jan '13

16 Jan '13

Hi, In the last few weeks I’ve been into connecting our club node 27821 to our rc-210 controler. Now we allways had some memory corruption problem with our controler (have to do with some ground loops, thats what I’ve been told..) Now I have the OK from the club president to swith this whole thing to Allstar! But before doing so I have a few question. Anyone have schematics to connect a URI to a MSR2000? same with MSF5000 and Desktrak. (we have a desktrac, and we will receive soon a MSF5000 to replace it, and I dont know if I will contect this to the msf or the desktrak ) what computer power I should be looking for, I will use the DSP fonction to do the cor ctcss... there will be a third node on the computer that will also do a remote base.. Thanks for your time.

2 1

Re: [App_rpt-users] Intel DN2800MT - 12V DC Powered Mobo (Randy Neals)
by Corey Badgley 15 Jan '13

15 Jan '13

Randy, The MOBO specs state environmental temp max is 104º. I know our Mtn site exceeds that temp during summer temps and premature failure may be an issue. Make sure you check your environmental specs before deploying to a remote site. Corey ********************

4 4

Intel DN2800MT - 12V DC Powered Mobo
by Randy Neals 14 Jan '13

14 Jan '13

Hi, Has anyone tried ACID on the Intel DN2800MT motherboard? Fanless, built in DC Power supply 8V-19V DC., msata. Seems perfect for a repeater site. I'm going to try it unless someone has, and tells me they tried it and it didn't work :-) http://www.silentpcreview.com/article1251-page2.html -Randy

2 1

Remote base help
by Michael Hebert 14 Jan '13

14 Jan '13

Group, Can someone please help me out either on or off list? I have 2 nodes hooked up to my ACID box using URIx. One is an allstar public node that is hooked up to a UHF repeater. The other is a private node remote base hooked up to a FT-817ND. Audio is working great on both radios. I am able to connect and disconnect with no problems between the nodes. So, to get to the point, I am not able to remote command the remote base either from DTMF via the repeater or CLI. I have tried both a serial and USB CAT cable from the ACID box. I am able to control the FT817ND with no problems using ham radio deluxe, so I know both cables and the radio are working. I did hook up a null modem cable from the port in rpt.conf to my laptop and I am seeing something in putty. I have tried the 3 port speeds that the radio supports for CAT. The data I am seeing using putty is unreadable for all 3 speeds. I do not know what to do next Any thoughts?? Thanks, Mike - KD5DFB

2 2

Re: [App_rpt-users] Intel DN2800MT - 12V DC Powered Mobo
by Alan Adamson 14 Jan '13

14 Jan '13

I run 2 URI's in regular DSP mode and 3 RTCM's and the box doesn't break a sweat, it runs perfectly. Also the reason that I have more memory in mine. I use it for more than just Allstar :). Alan From: Randy Neals [mailto:randy@neals.ca] Sent: Monday, January 14, 2013 1:31 AM To: Alan Adamson Cc: app_rpt-users(a)ohnosec.org Subject: Re: [App_rpt-users] Intel DN2800MT - 12V DC Powered Mobo Thanks Alan, Do you run the URI in regular (DSP) mode, or in simple mode with COR from radio? I'm curious how many radios it handles / system performance. -R On Sun, Jan 13, 2013 at 9:19 PM, Alan Adamson <adamson_alan(a)hotmail.com> wrote: I'm running ACID under debian on that exact board with a 60G SSD in a minibox case with 4 or 8G of memory can't remember. works just great From: app_rpt-users-bounces(a)ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Randy Neals Sent: Sunday, January 13, 2013 9:16 PM To: app_rpt-users(a)ohnosec.org Subject: [App_rpt-users] Intel DN2800MT - 12V DC Powered Mobo Hi, Has anyone tried ACID on the Intel DN2800MT motherboard? Fanless, built in DC Power supply 8V-19V DC., msata. Seems perfect for a repeater site. I'm going to try it unless someone has, and tells me they tried it and it didn't work :-) http://www.silentpcreview.com/article1251-page2.html -Randy

1 0

Upgrading node PC
by Ryan Collier 14 Jan '13

14 Jan '13

Mike, That very thing happened to me yesterday. If you look at asterisk -r, is it trying to connect? For some reason yesterday when I rebooted my machine it took 5 trying to get the node to register with the network then it took off. I was able to make connections again. 73 Ryan KB8PMY

3 3