- App_rpt-users - lists.keekles.org

AllStarLink procedure for Raspbian Stretch
by qrz＠tg9aor.net 15 Jul '18

15 Jul '18

I followed the procedure stated on Question 4 under the AllStarLink Wiki onto my Raspberry Pi 3B+ with Debian Stretch. First signs of deviation from the normal output I saw that, since I had installed the CompassLinux repository to install ambeserver, as I gave the command to install the raspberry pi kernel headers, the kernels had the compass attached to the version numbers of the archives being installed. I configured the node for dahdi/pseudo use. I ran the command asterisk -c to see the initial output, output below. AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version adaec47 Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and others. Created by Mark Spencer <markster(a)digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= [ Booting... [ Reading Master Configuration ] [ Initializing Custom Configuration Options ] [Jul 15 22:20:03] NOTICE[25155]: dnsmgr.c:394 do_reload: Managed DNS entries will be refreshed every 300 seconds. [Jul 15 22:20:03] NOTICE[25155]: cdr.c:1416 do_reload: CDR simple logging enabled. [Jul 15 22:20:03] NOTICE[25155]: loader.c:874 load_modules: 55 modules will be loaded. ..............[Jul 15 22:20:03] WARNING[25155]: chan_iax2.c:12750 load_module: Unable to open IAX timing interface: No such file or directory ......................................... ] Asterisk Ready. *CLI> [Jul 15 22:20:04] NOTICE[25161]: app_rpt.c:22184 rpt_master: Normal Repeater Init 48455 [Jul 15 22:20:04] WARNING[25176]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:04] ERROR[25176]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:04] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:04] WARNING[25178]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:04] ERROR[25178]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:06] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:06] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:06] WARNING[25179]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:06] ERROR[25179]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:08] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:09] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:09] WARNING[25181]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:09] ERROR[25181]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:11] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:11] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:11] WARNING[25183]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:11] ERROR[25183]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:13] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:13] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:13] WARNING[25185]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:13] ERROR[25185]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:15] NOTICE[25161]: app_rpt.c:22228 rpt_master: RPT thread restarted on 48455 [Jul 15 22:20:15] WARNING[25161]: app_rpt.c:22240 rpt_master: rpt_thread restarted on node 48455 [Jul 15 22:20:15] WARNING[25187]: chan_dahdi.c:928 dahdi_open: Unable to open '/dev/dahdi/pseudo': No such file or directory [Jul 15 22:20:15] ERROR[25187]: chan_dahdi.c:7906 chandup: Unable to dup channel: No such file or directory rpt:Sorry unable to obtain Rx channel [Jul 15 22:20:17] ERROR[25161]: app_rpt.c:22223 rpt_master: Continual RPT thread restarts, killing Asterisk I removed the CompassLinux repository, did an update, did another raspberry pi kernel headers install, it all changed to normal version numbers without the Compass suffix/prefix attached to it but output is the same. Do I need to flush everything and start fresh, or is there a procedure for Raspbian Stretch I need to follow? Many thanks. Jose Roberto Ruíz García Salas TG9AOR

3 2

*** Reminder Net This Tues July 17th - OPEN SOURCE ENGINEERING -ASL Pi HotSpots w/ WX8L
by Mike 15 Jul '18

15 Jul '18

*Net Tues July 17th @ 8:30pm EDT ( that's wed July 18th @ 00:30 utc ) * *Connection data final at - www.29999.link* SHOW-N-TELL / OPEN SOURCE ENGINEERING ! Sean, WX8L is Going to chat with us on his "ASL Micro-node/HotSpot " ! You GOTTA Check Out His How-2 Page ! https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html Trying to get others stuff for us all but Shawn is the main attraction and he is eager to answer questions on his ASL Pi Hotspot in our Q&A. Taking questions for the net via email at KB8JNM [at] USWX.mobi or Live during the Net Net will be recorded for playback on 29999 Sunday July 21 @ 5pm edt / 21:00 UTC 2nd test of our playback script (automation).

1 0

OSS Free ASL with URIx
by JJC 15 Jul '18

15 Jul '18

Started a new thread since the old one was hijacked a little bit.. At any rate, I have a current raspbian kernal (without OSS) and I have done the following: 1. disabled onboard audio (just blacklisting the KM for the device) 2. configured ALSA to use the C-Media device (URIx) for default audio 3. installed pulseaudio 4. installed osspd 5. start pulseaudio 6. stard osspd defining --adsp as dsp1 and as a padsp slave 7. start asterisk It's not perfect yet, but I do have ASL receiving audio from the URIx and transmitting audio through the URIx.. it's not clear audio.. maybe audio levels? Also note that there i an osspd-alsa but that doesn't work.. when I try that it causes the usb closed errors that I had posted in the other thread and ASL won't get past that point. Unfortunately the site is far enough away that I can't get to the device and put it on the bench.. a user is reporting that "tones" are what he is hearing after he unkeys If I can figure out the rest I'll be publishing all of the things that need to be edited to 'get-er-done' until then I'll be playing with it... any input/ideas/feedback is welcome!

2 3

iaxrpt running on Android
by Alberto Enrique Puig 14 Jul '18

14 Jul '18

Any news on a fix for iaxrpt running on Android? 73' Alberto KP4AP ________________________________ From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> on behalf of app_rpt-users-request(a)lists.allstarlink.org <app_rpt-users-request(a)lists.allstarlink.org> Sent: Saturday, July 14, 2018 12:00:01 PM To: app_rpt-users(a)lists.allstarlink.org Subject: App_rpt-users Digest, Vol 113, Issue 13 Send App_rpt-users mailing list submissions to app_rpt-users(a)lists.allstarlink.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request(a)lists.allstarlink.org You can reach the person managing the list at app_rpt-users-owner(a)lists.allstarlink.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." This site is dedicated to the memory of Jim Dixon WB6NIL Today's Topics: 1. IAXRPT (Russell Thomas) 2. Re: IAXRPT (Mike) 3. Re: IAXRPT (Russell Thomas) 4. Re: IAXRPT (Mike Besemer - WM4B) 5. AllStarLink News and Updates (AllStarLink Admin Role) 6. Re: OSS Free ASL with URIx (JJC) ---------------------------------------------------------------------- Message: 1 Date: Fri, 13 Jul 2018 11:16:47 -0500 From: Russell Thomas <russell(a)kv4s.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] IAXRPT Message-ID: <CAANUOmHn_KmM1sMVoWSE9AK3Tar9zQdO2LTV6OATDX9dHjE1ew(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Looking for some help setting up IAXPRT on our club's AWS ASL node. I edited the iax.conf and the extensions.conf. I made sure the IAX ports were open on the AWS instance. When I try connecting from the Windows client it says calling and the state has a "?" in it. Eventually it drops out. Any ideas? 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com ------------------------------ Message: 2 Date: Fri, 13 Jul 2018 13:41:22 -0400 From: Mike <mm(a)midnighteng.com> To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] IAXRPT Message-ID: <8e3c1daf-97a5-aa67-913c-b1ecf02f7454(a)midnighteng.com> Content-Type: text/plain; charset=utf-8; format=flowed Well, I'm going to bet you left a set-up set out. Look in your extentions.conf The below works if you define what node, node1 and node2 are [globals] HOMENPA = 330 ; change this to your Area Code NODE = 48396 ; change this to your node number NODE1 = 1999 NODE2 = 1010 NODE3 = 1020 [iaxrpt] exten => ${NODE},1,rpt(${NODE}|X) exten => ${NODE1},1,rpt(${NODE1}|X) exten => ${NODE2},1,rpt(${NODE2}|X) Otherwise define them exact like this [iaxrpt] exten => 48396,1,rpt(48396}|X) I showed both ways since when you look at the default settings in the file, you may see it listed either way. Can be confusing to those that do not know. Just so you understand the difference since the top one has been defined as a variable. Also make sure the 'context' is correct and your password in iax.conf Also, if you are using poerts 4570, or outside the normal/default, you will need to include that in your iaxrpt program connection data 'HOST' for the account like... 192.168.1.222:4570 .That should get you somewhere ! ...mike/kb8jnm On 7/13/2018 12:16 PM, Russell Thomas wrote: > Looking for some help setting up IAXPRT on our club's AWS ASL node. > > I edited the iax.conf and the extensions.conf. I made sure the IAX > ports were open on the AWS instance. > > When I try connecting from the Windows client it says calling and the > state has a "?" in it. Eventually it drops out. > > Any ideas? > > > 73, > Russell Thomas, KV4S > > Cell: 205.202.1701 > DMR: 3101393 > D-Star: KV4S > AllStar: 47923 > EchoLink: KV4S-L (1003254) > HamShackHotline: 614 > Web: http://KV4S.com > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 3 Date: Fri, 13 Jul 2018 12:44:15 -0500 From: Russell Thomas <russell(a)kv4s.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] IAXRPT Message-ID: <CAANUOmGP6bXq2ZzDeAVoi3kG5VWefPLPMu0R_s=cxuxggH-B6g(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Someone called me in regards to the post and after some troubleshooting it appears I didn't need to use special characters in the password. Thanks everyone!! 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm(a)midnighteng.com> wrote: > Well, > > I'm going to bet you left a set-up set out. > > Look in your extentions.conf > > The below works if you define what node, node1 and node2 are > > [globals] > HOMENPA = 330 ; change this to your Area Code > NODE = 48396 ; change this to your node number > NODE1 = 1999 > NODE2 = 1010 > NODE3 = 1020 > > [iaxrpt] > exten => ${NODE},1,rpt(${NODE}|X) > exten => ${NODE1},1,rpt(${NODE1}|X) > exten => ${NODE2},1,rpt(${NODE2}|X) > > > Otherwise > > define them exact like this > > [iaxrpt] > > exten => 48396,1,rpt(48396}|X) > > > I showed both ways since when you look at the default settings in the file, > you may see it listed either way. > > Can be confusing to those that do not know. > > Just so you understand the difference since the top one has been defined as > a variable. > > Also make sure the 'context' is correct and your password in iax.conf > > Also, if you are using poerts 4570, or outside the normal/default, you will > need to include that in your > > iaxrpt program connection data 'HOST' for the account like... > > 192.168.1.222:4570 > > .That should get you somewhere ! > > ...mike/kb8jnm > > > > On 7/13/2018 12:16 PM, Russell Thomas wrote: >> >> Looking for some help setting up IAXPRT on our club's AWS ASL node. >> >> I edited the iax.conf and the extensions.conf. I made sure the IAX >> ports were open on the AWS instance. >> >> When I try connecting from the Windows client it says calling and the >> state has a "?" in it. Eventually it drops out. >> >> Any ideas? >> >> >> 73, >> Russell Thomas, KV4S >> >> Cell: 205.202.1701 >> DMR: 3101393 >> D-Star: KV4S >> AllStar: 47923 >> EchoLink: KV4S-L (1003254) >> HamShackHotline: 614 >> Web: http://KV4S.com >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and >> scroll down to the bottom of the page. Enter your email address and press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a message to >> the list detailing the problem. > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and > scroll down to the bottom of the page. Enter your email address and press > the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message to > the list detailing the problem. ------------------------------ Message: 4 Date: Fri, 13 Jul 2018 17:52:57 +0000 (GMT) From: Mike Besemer - WM4B <mwbesemer(a)cox.net> To: app_rpt-users(a)lists.allstarlink.org Subject: Re: [App_rpt-users] IAXRPT Message-ID: <2ba8eb.35d2.16494c63e47.Webtop.0(a)cox.net> Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=no Just saw this. I got my butt kicked by that too! Mike WM4B On Fri, Jul 13, 2018 at 1:44 PM, Russell Thomas wrote: > Someone called me in regards to the post and after some > troubleshooting it appears I didn't need to use special characters in > the password. > > Thanks everyone!! > > > 73, > Russell Thomas, KV4S > > Cell: 205.202.1701 > DMR: 3101393 > D-Star: KV4S > AllStar: 47923 > EchoLink: KV4S-L (1003254) > HamShackHotline: 614 > Web: http://KV4S.com > > > On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm(a)midnighteng.com> wrote: >> Well, >> >> I'm going to bet you left a set-up set out. >> >> Look in your extentions.conf >> >> The below works if you define what node, node1 and node2 are >> >> [globals] >> HOMENPA = 330 ; change this to your Area Code >> NODE = 48396 ; change this to your node number >> NODE1 = 1999 >> NODE2 = 1010 >> NODE3 = 1020 >> >> [iaxrpt] >> exten => ${NODE},1,rpt(${NODE}|X) >> exten => ${NODE1},1,rpt(${NODE1}|X) >> exten => ${NODE2},1,rpt(${NODE2}|X) >> >> >> Otherwise >> >> define them exact like this >> >> [iaxrpt] >> >> exten => 48396,1,rpt(48396}|X) >> >> >> I showed both ways since when you look at the default settings in the >> file, >> you may see it listed either way. >> >> Can be confusing to those that do not know. >> >> Just so you understand the difference since the top one has been >> defined as >> a variable. >> >> Also make sure the 'context' is correct and your password in iax.conf >> >> Also, if you are using poerts 4570, or outside the normal/default, >> you will >> need to include that in your >> >> iaxrpt program connection data 'HOST' for the account like... >> >> 192.168.1.222:4570 >> >> .That should get you somewhere ! >> >> ...mike/kb8jnm >> >> >> >> On 7/13/2018 12:16 PM, Russell Thomas wrote: >>> >>> Looking for some help setting up IAXPRT on our club's AWS ASL node. >>> >>> I edited the iax.conf and the extensions.conf. I made sure the IAX >>> ports were open on the AWS instance. >>> >>> When I try connecting from the Windows client it says calling and >>> the >>> state has a "?" in it. Eventually it drops out. >>> >>> Any ideas? >>> >>> >>> 73, >>> Russell Thomas, KV4S >>> >>> Cell: 205.202.1701 >>> DMR: 3101393 >>> D-Star: KV4S >>> AllStar: 47923 >>> EchoLink: KV4S-L (1003254) >>> HamShackHotline: 614 >>> Web: http://KV4S.com >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and >>> scroll down to the bottom of the page. Enter your email address and >>> press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to >>> the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and >> scroll down to the bottom of the page. Enter your email address and >> press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to >> the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem. ------------------------------ Message: 5 Date: Fri, 13 Jul 2018 14:54:25 -0400 From: AllStarLink Admin Role <admin(a)allstarlink.org> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: [App_rpt-users] AllStarLink News and Updates Message-ID: <96f78082-d1b9-a4dc-59e6-74da36d1c436(a)allstarlink.org> Content-Type: text/plain; charset=windows-1252 We here at AllStarLink are not always best at publishing what the organization is up to. There's lots of great things happening, some more visible than others. Below is a bit of what we've been up to since the AllStar project was turned over to us. AllStarLink has assembled team of around a dozen volunteer admin/support experts to troubleshoot any possible AllStar infrastructure problems, process node and user ID requests, improve and bug fix ASL, attempt to keep up with end user support and pay the bills. Our team has identified and fixed every issue which has been brought to our attention. There is always room for improvement and we're continually working to this end. We are improving the current infrastructure to eliminate single points of failure. There are new geo-redundant registration servers in test with a clustered database backend. DNS has been migrated to this cluster of servers and has been running without fail for months. As AllStar supports a diverse userbase; many running older distributions at remote sites who desire stability, our admin team must operate with stability as the highest priority. As such we cannot make sweeping changes to critical network infrastructure without extensive testing. The registration and database servers have uptimes approaching a year, and have been continually available during this time. These servers are responsible for the nodes list, which is distributed to redundant public facing servers and on to users AllStar nodes. Even in the event of an outage during maintenance, the node list simply stops updating for a time. While inconvenient to nodes registering during this window, the vast majority of nodes are still able to link with this older node list. Our admin team has built a new stats server and are working on a new portal. By the way, we have been successfully processing ID and node requests on this new portal for months and have received very positive feedback on its new node list. We added a new node map and performance improvements to the stats server. MediaWiki has been installed with advanced search, a WYSIWYG editor, and other plugins, enabling anyone to create or update documentation. The Drupal site at docs.allstarlink.org is migrating as editors time permits. Our distribution has been updated including ASL 1.01 to run on the latest OS and has many improvements. More improvements are under active development. We're always open to assistance, whether it be design work, admin/support team help, or a completely new feature created by a code contributor. It's easy to get involved at any level. In closing we want to stress that if you have a problem with AllStar servers or want to help out in any way, please let us know by posting to the app_rpt-users list. That's the best way to insure the fastest response. AllStarLink, Inc. Directors: Kevin Custer, W3KKC Pete Elke, WI6H Bryan Fields, W9CR Tim Sawyer, WD6AWP ------------------------------ Message: 6 Date: Fri, 13 Jul 2018 15:45:25 -0600 From: JJC <cummingsj(a)gmail.com> To: Users of Asterisk app_rpt <app_rpt-users(a)lists.allstarlink.org> Subject: Re: [App_rpt-users] OSS Free ASL with URIx Message-ID: <CAOb75Ot3fFCStUBx1pL_A51Qa4VyB+B+45O+pxvBxWU9imw-uw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Good news, I have made it all work flawlessly! There were a few tweaks that I had to make within pulseaudio in terms of some buffer values and the correct sample rate and boom, I have clean audio now without the use of OSS which means I can have an updated kernel! While there are a few different moving parts, it's actually somewhat trivial.. I'll put together directions if anyone else cares lol... JJC N0PKT On Thu, Jul 12, 2018 at 10:37 PM JJC <cummingsj(a)gmail.com> wrote: > Started a new thread since the old one was hijacked a little bit.. > > At any rate, I have a current raspbian kernal (without OSS) and I have > done the following: > > 1. disabled onboard audio (just blacklisting the KM for the device) > 2. configured ALSA to use the C-Media device (URIx) for default audio > 3. installed pulseaudio > 4. installed osspd > 5. start pulseaudio > 6. stard osspd defining --adsp as dsp1 and as a padsp slave > 7. start asterisk > > It's not perfect yet, but I do have ASL receiving audio from the URIx and > transmitting audio through the URIx.. it's not clear audio.. maybe audio > levels? Also note that there i an osspd-alsa but that doesn't work.. when > I try that it causes the usb closed errors that I had posted in the other > thread and ASL won't get past that point. > > Unfortunately the site is far enough away that I can't get to the device > and put it on the bench.. a user is reporting that "tones" are what he is > hearing after he unkeys > > If I can figure out the rest I'll be publishing all of the things that > need to be edited to 'get-er-done' until then I'll be playing with it... > any input/ideas/feedback is welcome! >

2 1

AllStarLink News and Updates
by AllStarLink Admin Role 13 Jul '18

13 Jul '18

We here at AllStarLink are not always best at publishing what the organization is up to. There's lots of great things happening, some more visible than others. Below is a bit of what we've been up to since the AllStar project was turned over to us. AllStarLink has assembled team of around a dozen volunteer admin/support experts to troubleshoot any possible AllStar infrastructure problems, process node and user ID requests, improve and bug fix ASL, attempt to keep up with end user support and pay the bills. Our team has identified and fixed every issue which has been brought to our attention. There is always room for improvement and we're continually working to this end. We are improving the current infrastructure to eliminate single points of failure. There are new geo-redundant registration servers in test with a clustered database backend. DNS has been migrated to this cluster of servers and has been running without fail for months. As AllStar supports a diverse userbase; many running older distributions at remote sites who desire stability, our admin team must operate with stability as the highest priority. As such we cannot make sweeping changes to critical network infrastructure without extensive testing. The registration and database servers have uptimes approaching a year, and have been continually available during this time. These servers are responsible for the nodes list, which is distributed to redundant public facing servers and on to users AllStar nodes. Even in the event of an outage during maintenance, the node list simply stops updating for a time. While inconvenient to nodes registering during this window, the vast majority of nodes are still able to link with this older node list. Our admin team has built a new stats server and are working on a new portal. By the way, we have been successfully processing ID and node requests on this new portal for months and have received very positive feedback on its new node list. We added a new node map and performance improvements to the stats server. MediaWiki has been installed with advanced search, a WYSIWYG editor, and other plugins, enabling anyone to create or update documentation. The Drupal site at docs.allstarlink.org is migrating as editors time permits. Our distribution has been updated including ASL 1.01 to run on the latest OS and has many improvements. More improvements are under active development. We're always open to assistance, whether it be design work, admin/support team help, or a completely new feature created by a code contributor. It's easy to get involved at any level. In closing we want to stress that if you have a problem with AllStar servers or want to help out in any way, please let us know by posting to the app_rpt-users list. That's the best way to insure the fastest response. AllStarLink, Inc. Directors: Kevin Custer, W3KKC Pete Elke, WI6H Bryan Fields, W9CR Tim Sawyer, WD6AWP

1 0

Re: [App_rpt-users] IAXRPT
by Mike Besemer - WM4B 13 Jul '18

13 Jul '18

Just saw this. I got my butt kicked by that too! Mike WM4B On Fri, Jul 13, 2018 at 1:44 PM, Russell Thomas wrote: > Someone called me in regards to the post and after some > troubleshooting it appears I didn't need to use special characters in > the password. > > Thanks everyone!! > > > 73, > Russell Thomas, KV4S > > Cell: 205.202.1701 > DMR: 3101393 > D-Star: KV4S > AllStar: 47923 > EchoLink: KV4S-L (1003254) > HamShackHotline: 614 > Web: http://KV4S.com > > > On Fri, Jul 13, 2018 at 12:41 PM, Mike <mm(a)midnighteng.com> wrote: >> Well, >> >> I'm going to bet you left a set-up set out. >> >> Look in your extentions.conf >> >> The below works if you define what node, node1 and node2 are >> >> [globals] >> HOMENPA = 330 ; change this to your Area Code >> NODE = 48396 ; change this to your node number >> NODE1 = 1999 >> NODE2 = 1010 >> NODE3 = 1020 >> >> [iaxrpt] >> exten => ${NODE},1,rpt(${NODE}|X) >> exten => ${NODE1},1,rpt(${NODE1}|X) >> exten => ${NODE2},1,rpt(${NODE2}|X) >> >> >> Otherwise >> >> define them exact like this >> >> [iaxrpt] >> >> exten => 48396,1,rpt(48396}|X) >> >> >> I showed both ways since when you look at the default settings in the >> file, >> you may see it listed either way. >> >> Can be confusing to those that do not know. >> >> Just so you understand the difference since the top one has been >> defined as >> a variable. >> >> Also make sure the 'context' is correct and your password in iax.conf >> >> Also, if you are using poerts 4570, or outside the normal/default, >> you will >> need to include that in your >> >> iaxrpt program connection data 'HOST' for the account like... >> >> 192.168.1.222:4570 >> >> .That should get you somewhere ! >> >> ...mike/kb8jnm >> >> >> >> On 7/13/2018 12:16 PM, Russell Thomas wrote: >>> >>> Looking for some help setting up IAXPRT on our club's AWS ASL node. >>> >>> I edited the iax.conf and the extensions.conf. I made sure the IAX >>> ports were open on the AWS instance. >>> >>> When I try connecting from the Windows client it says calling and >>> the >>> state has a "?" in it. Eventually it drops out. >>> >>> Any ideas? >>> >>> >>> 73, >>> Russell Thomas, KV4S >>> >>> Cell: 205.202.1701 >>> DMR: 3101393 >>> D-Star: KV4S >>> AllStar: 47923 >>> EchoLink: KV4S-L (1003254) >>> HamShackHotline: 614 >>> Web: http://KV4S.com >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)lists.allstarlink.org >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> To unsubscribe from this list please visit >>> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >>> and >>> scroll down to the bottom of the page. Enter your email address and >>> press >>> the "Unsubscribe or edit options button" >>> You do not need a password to unsubscribe, you can do it via email >>> confirmation. If you have trouble unsubscribing, please send a >>> message to >>> the list detailing the problem. >> >> >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)lists.allstarlink.org >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> >> To unsubscribe from this list please visit >> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users >> and >> scroll down to the bottom of the page. Enter your email address and >> press >> the "Unsubscribe or edit options button" >> You do not need a password to unsubscribe, you can do it via email >> confirmation. If you have trouble unsubscribing, please send a >> message to >> the list detailing the problem. > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > and scroll down to the bottom of the page. Enter your email address > and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email > confirmation. If you have trouble unsubscribing, please send a message > to the list detailing the problem.

1 0

IAXRPT
by Russell Thomas 13 Jul '18

13 Jul '18

Looking for some help setting up IAXPRT on our club's AWS ASL node. I edited the iax.conf and the extensions.conf. I made sure the IAX ports were open on the AWS instance. When I try connecting from the Windows client it says calling and the state has a "?" in it. Eventually it drops out. Any ideas? 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com

2 2

Current procedure for re-compiling asterisk/asl on deb9 ?
by Mike 13 Jul '18

13 Jul '18

Do we have a current procedure for re-compiling asterisk/asl on deb9 ? Any links to a written version ? ...mike/kb8jnm

3 6

Re: [App_rpt-users] URI-X Issues With New Raspbian build
by Jim Aspinwall No1PC 13 Jul '18

13 Jul '18

First, apologies for what ended up coming out as a rant that 'got' to a few people. Not my intention... I tried to be casual/conversational and that doesn't work in-type. As a result I did get a different perspective on the history of AllStar developments... :O *** Steve: thanks for the specific log locations... I'll fetch and send them soonest. If there are common known errors and clues to "yup, bad card..." or "check x.conf and y.conf for consistency of z parameter" - I'm more than willing to start documenting log tidbits, clues, etc. for the 'KB' effort. (when I designed software I did ask the developers to spit out details once in awhile so we knew when function X crapped out... "wow, you know we can do that? CRAP!") In a production support realm, when you see a trend of 10... 20 similar issues, you start looking to how-to, KB, or systematic remote fixes to relieve the support team of production issues. As the back-end person pushing apps and updates the last thing *I* want is end-user calls/e-mails for the easy stuff... I have my own images, patches, packages and deployments to work on and annoy the user base on "Patch Tuesday"... the help desk knows better than to 'dox' me out to the users... :O *** Mike, you asked: "Could you state what the 'first few' commands are on 1st boot with your new image ? ...mike/kb8jnm" What am I looking for? The boot process of course dumps a ton of initialization info... What I type in? I go for "sudo asl-menu"

2 1

*** Net Tues July 14th - Open Source Engineering ASL-Pi HOT SPOTs WX8L Guest for Q&A !
by Mike 12 Jul '18

12 Jul '18

*Net Tues July 17th @ 8:30pm EDT ( that's wed July 18th @ 00:30 utc ) * *Connection data will be added as we put it together at - www.29999.link* SHOW-N-TELL - OPEN SOURCE ENGINEERING ! Sean, WX8L is Going to chat with us on his "ASL Micro-node/HotSpot " ! https://wx8l.blogspot.com/2018/06/personal-allstar-pocket-node-based-on.html You GOTTA Check Out His How-2 Page ! Trying to get others stuff for us all but Shawn is the main attraction and he is eager to answer questions on his ASL Pi Hotspot in our Q&A. Taking questions for the net via email at KB8JNM [at] USWX.mobi or Live during the Net But here is a tease from me... Just thought I would give everyone a sneak peek at what I have been working on, for mine that uses a touch screen that I intend to utilize to it's fullest potential... But it already does not look like this ... LOL But I'm not ready to answer questions Yet ! But it has a working DMR Bridge loading talk groups via DTMF ! Without a radio, so far, I have $75 in my 3B+ version. Tune in and 'help with your knowledge' and perhaps show-off your Open Source Engineering skills. I will collect photos/links of your projects for posting to the group on our web page ! www.29999.link/kb8jnm-asl-pi.JPG *This net will be recorded and played back at a new day and time, * *perhaps Sat 14th / Sun 15th in the afternoon. TBA * ...mike/kb8jnm

1 1