- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] App_rpt-users Digest, Vol 29, Issue 19
by Ken Leisten 16 Jul '11

16 Jul '11

Yes, thanks its working and on line. Next question is how do I adjust tx/rx audio for each port on the LOX. "Radio-tune-menu" doesnt seem to exist. Ken On Sat, Jul 16, 2011 at 9:00 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > Today's Topics: > > 1. CURL error (George Csahanin) > 2. Exp reflector (Neal Garbenis) > 3. Re: Exp reflector (Bryan Boyle) > 4. Re: Echolink Ka-CHunk nodes? (Phil N6TCT) > 5. Re: Exp reflector (Neal Garbenis) > 6. FWIW... (Bryan D. Boyle) > 7. Re: Pico node configuration (Dale Weber) > > > ---------- Forwarded message ---------- > From: "George Csahanin" <george(a)dyb.com> > To: "app_rpt mailing list" <app_rpt-users(a)ohnosec.org> > Date: Fri, 15 Jul 2011 12:13:45 -0500 > Subject: [App_rpt-users] CURL error > ** > When trying to use the web transciever I get this: > > ERROR[26440]: pbx.c:1550 ast_func_read: Function CURL not registered > > I do have curl...: > > [root@radio ~]# curl --help > Usage: curl [options...] <url> > Options: (H) means HTTP/HTTPS only, (F) means FTP only > -a/--append Append to target file when uploading (F) > -A/--user-agent <string> User-Agent to send to server (H) > --anyauth Pick "any" authentication method (H) > -b/--cookie <name=string/file> Cookie string or file to read cookies from > (H) > --basic Use HTTP Basic Authentication (H) > -B/--use-ascii Use ASCII/text transfer > -c/--cookie-jar <file> Write cook > > What is "*Function CURL not registered"* > ** > ?? > > GeorgeC > W2DB > ** > > > ---------- Forwarded message ---------- > From: Neal Garbenis <njgarbenis(a)gmail.com> > To: app_rpt-users(a)ohnosec.org > Date: Fri, 15 Jul 2011 17:44:26 -0400 > Subject: [App_rpt-users] Exp reflector > I am trying to make a experimental asterisk and irlp reflector. I went > through the svn and found chan- irlp and a older version of app-rpt. I had > the system working for a day or so and then it stopped. > > My question is has anyone done this before. If so how did you do it? My > irlp exp is 0054. > > Neal > > > ---------- Forwarded message ---------- > From: Bryan Boyle <bdboyle(a)bdboyle.com> > To: Neal Garbenis <njgarbenis(a)gmail.com> > Date: Fri, 15 Jul 2011 18:07:24 -0400 > Subject: Re: [App_rpt-users] Exp reflector > support for irlp was taken out by the authors of asterisk at Cameron's > demand...did not want asterisk to cross connect to 'his' network, from what > I understand. those closer please feel free to fill in or correct. > > -- > Bryan > Sent from my iPhone > please forgive misspellings... > > > > On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis(a)gmail.com> wrote: > > > I am trying to make a experimental asterisk and irlp reflector. I went > through the svn and found chan- irlp and a older version of app-rpt. I had > the system working for a day or so and then it stopped. > > > > My question is has anyone done this before. If so how did you do it? My > irlp exp is 0054. > > > > Neal > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > ---------- Forwarded message ---------- > From: Phil N6TCT <phil.n6tct(a)gmail.com> > To: Ken Page <vk4akp(a)yahoo.com.au> > Date: Fri, 15 Jul 2011 16:25:42 -0700 > Subject: Re: [App_rpt-users] Echolink Ka-CHunk nodes? > Hi Ken. > > I have not seen this exact problem, but I have seen a problem where > echolink users connect to our allstar/echolink node but no audio is > passed. They can key up the node but it just transmits a carrier with > no audio. For some, possibly most, echolink users it works just fine. > I have chalked this up to either bad audio configuration on the > echolink user's end or bad port forwarding configuration, but have not > done any real investigation. > > I have not seen the continuous kerchunking that you describe. (And I > hope that I don't, that sounds super annoying!) Sorry ... > > Phil, N6TCT > > On Thu, Jul 14, 2011 at 8:21 PM, Ken Page <vk4akp(a)yahoo.com.au> wrote: > > Hi, > > > > I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just > log > > in and then I'm left with a connection that just key's up and down > > constantly every few seconds with no audio all day until I notice and > hang > > it up.. > > > > Do I need to update some of the All_Star software or something to get > around > > this? > > > > It's something that has only started in the last month or so. > > > > 73 de Ken - vk4akp(a)gmail.com > > All_Star:2134 - vk4rkp - 146.725Mhz -Neg. > > Echolink: 7878 > > .-.-. > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > ---------- Forwarded message ---------- > From: Neal Garbenis <njgarbenis(a)gmail.com> > To: Bryan Boyle <bdboyle(a)bdboyle.com> > Date: Fri, 15 Jul 2011 19:30:29 -0400 > Subject: Re: [App_rpt-users] Exp reflector > Yes you are correct but it is ok to have exp reflectors to tie both > networks together. This is what I am trying to do > > Sent from my iPhone > > On Jul 15, 2011, at 6:07 PM, Bryan Boyle <bdboyle(a)bdboyle.com> wrote: > > > support for irlp was taken out by the authors of asterisk at Cameron's > demand...did not want asterisk to cross connect to 'his' network, from what > I understand. those closer please feel free to fill in or correct. > > > > -- > > Bryan > > Sent from my iPhone > > please forgive misspellings... > > > > > > > > On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis(a)gmail.com> wrote: > > > >> I am trying to make a experimental asterisk and irlp reflector. I went > through the svn and found chan- irlp and a older version of app-rpt. I had > the system working for a day or so and then it stopped. > >> > >> My question is has anyone done this before. If so how did you do it? My > irlp exp is 0054. > >> > >> Neal > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > ---------- Forwarded message ---------- > From: "Bryan D. Boyle" <bdboyle(a)bdboyle.com> > To: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Date: Fri, 15 Jul 2011 22:34:06 -0400 > Subject: [App_rpt-users] FWIW... > Some photos of the installation of active nodes 27294/27295/27774 > (others are in abeyance, running under pseudo/usbxxxxx) > > Hope no one minds posting the URL. It's a work in progress... > > http://www.wb0yle.com/rptr.htm > > 73 BB WB0YLE > > > > ---------- Forwarded message ---------- > From: Dale Weber <n7pkt(a)picklejar.org> > To: app_rpt-users(a)ohnosec.org > Date: Fri, 15 Jul 2011 20:02:19 -0700 > Subject: Re: [App_rpt-users] Pico node configuration > On Wednesday, July 13, 2011 07:10:22 PM Ken Leisten wrote: > > Hi all, > > > > Got Pickle Linux copied to a flash card and running on my beagleboard/LOX > > node. It walked me through changing some network settings for IP, > gateway, > > subnet etc., but it never asked me for a node number or tried to download > > configuration from the allstar portal. I tried forcing a config through > the > > portal but this doesn't seem to work either. What am I missing? > > Got to node configuration, and select the server and node you want > to run on > Beagle/LOX. Then select your radio interface type as beagle (BeagleBoard-xM > with LOX board). Then you will see a selection for port. Port 1 is closest > to > the Ethernet connector on Beagle. Finally, download the server > configuration > with your node to the Beagle with/LOX. > > That should do it! > > 8-Dale > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

Pico node configuration
by Ken Leisten 16 Jul '11

16 Jul '11

Hi all, Got Pickle Linux copied to a flash card and running on my beagleboard/LOX node. It walked me through changing some network settings for IP, gateway, subnet etc., but it never asked me for a node number or tried to download configuration from the allstar portal. I tried forcing a config through the portal but this doesn't seem to work either. What am I missing? Thanks, Ken

2 1

Exp reflector
by Neal Garbenis 15 Jul '11

15 Jul '11

I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped. My question is has anyone done this before. If so how did you do it? My irlp exp is 0054. Neal

2 2

Echolink Ka-CHunk nodes?
by Ken Page 15 Jul '11

15 Jul '11

Hi, I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just log in and then I'm left with a connection that just key's up and down constantly every few seconds with no audio all day until I notice and hang it up.. Do I need to update some of the All_Star software or something to get around this? It's something that has only started in the last month or so. 73 de Ken - vk4akp(a)gmail.com All_Star:2134 - vk4rkp - 146.725Mhz -Neg. Echolink: 7878 .-.-.

2 1

Chicken Burst tweak
by Lu Vencl 15 Jul '11

15 Jul '11

Looking for the parameter and file (if not in rpt.conf) where I can tweak the length of chicken burst. The current amount is not enough for my VX 5R.. I need another 200 MS to be effective. Thanks.. Lu KA4EPS

7 17

Question about making a call from Asterisk
by Alex Casanova 13 Jul '11

13 Jul '11

Hi Maybe this question is a newbie question, sorry. I will make a call from my Asterisk Server to a RoIP server. In my dialplan I put this lines to make the call but I don´t know what is the context to make the call ;In my extensions.conf exten => _704601050,1,Answer() exten => _704601050,n,NoOp(*****************************************************) exten => _704601050,n,NoOp(******** making a call to a RoIP Server ********) exten => _704601050,n,Dial(IAX2/<user>:<pass>@server.fqdn,Rpt,256) exten => _704601050,n,NoOp(*****************************************************) exten => _704601050,n,Hangup() I need some help to improve calls from my Asterisk Server to a RoIP Server Thanks a lot Best Regards -- ------------------------------------------- Alex Casanova (EA5HJX) Web: www.bicubik.net Móvil: 668.85.38.18 Skype: alexbogus

1 0

temperature sensor
by Scott Weis 13 Jul '11

13 Jul '11

Hi All, I am having a problem with the hot weather shutting down a repeater. I would like to know if anyone has any way of monitoring the ambient temperature in the room as well as the surface of a heat sink and then triggering an event in app_rpt when they exceeded a certain threshold. Thanks, Scott KB2EAR

2 1

Node # 2 on the air
by Lu Vencl 12 Jul '11

12 Jul '11

All, Making some good progress.. Got the second node on the air.. Couple of odd things I came across.. 1. Can't download server configuration via the portal.. I have to help it by running nodesetup.sh at the node end.. No problem though as I can still get it done. (Odd huh?) 2. Audio occasionally sounds like it is motorboating. This is not packet loss as even the ID sounds like it is slowing down and pulsing.. It almost sounds like an IRQ conflict. I tried to change USB ports, turned off all unused devices such as serial ports, parallel ports etc.. It clears up on the next transmission of audio, or sometimes during the transmission.. Any thoughts?

1 0

Flowchart of app_rpt.c?
by Tony KT9AC 11 Jul '11

11 Jul '11

Hello, I've been trying feverishly to modify app_rpt.c to add customizations and would like to see if there is a flowchart of how the pieces work together. I don't speak Asterisk and am increasingly becoming frustrated. My goals are: 1) Muting or changing Main TX PL when CW ID'ing without any input signals. 2) Ability to drop the Main TX following a link/remote unkey. I have a remote base onto another repeater's output; could use althangtime for this? 3) Ability to have local repeater audio override or mute any incoming remote/link audio. I hate that they mix, but understand this is a conference-call style phone system we're dealing with. 4) Ability to use a local-PL/link-PL style setup in a large linked system. I'll do my best to code and test; but am ready to go back to circuits and solder if these are unreasonable. I've entered change requests in Mantis, but never got any results. Thanks, Tony

1 0

Incorrect time
by Lu Vencl 11 Jul '11

11 Jul '11

All, For some reason my node is announcing the incorrect time.. (8 hours behind) even though the server time is correct and I have a -5 UTC offset.. Any known issues or thoughts? Lu KA4EPS

2 2