- App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01
by K5CG 15 Jun '18

15 Jun '18

Starting over. Brand new Pi 3 B + Formatted microSD card with SD Formatter. Re-flashed microSD card with Win32 Disk Imager Booted, "Resized root filesystem... rebooting" Logged in as repeater Changed password for "repeater" user sudo su - to become root passwd to set root user password Edited /etc/ssh/sshd_config to enable root login systemctl restart ssh to refresh sshd config ip addr 192.168.1.225/24 (from DHCP) ssh to 192.168.1.225 as root user root@repeater:~# apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel raspberrypi-kernel-headers set on hold. raspberrypi-kernel set on hold. root@repeater:~# apt-get update Fetched 11.9 MB in 8s (1,361 kB/s) Reading package lists... Done root@repeater:~# apt-get upgrade -y Preparing... Unpacking... Yadda yadda... Setting up linux-libc-dev:armhf (4.9.82-1+deb9u3+rpi1) ... Setting up libicu57:armhf (57.1-6+deb9u2) ... Setting up raspi-config (20180406+1) ... Setting up perl (5.24.1-3+deb9u3) ... Setting up libssl1.0.2:armhf (1.0.2l-2+deb9u3) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... Setting up libssl1.1:armhf (1.1.0f-3+deb9u2) ... Processing triggers for systemd (232-25+deb9u2) ... Setting up openssl (1.1.0f-3+deb9u2) ... Processing triggers for man-db (2.7.6.1-2) ... Setting up asl-asterisk-tools (1.01-20180226-10) ... Setting up libraspberrypi0 (1.20180417-1) ... Setting up libraspberrypi-doc (1.20180417-1) ... Setting up libraspberrypi-dev (1.20180417-1) ... Setting up libraspberrypi-bin (1.20180417-1) ... Processing triggers for libc-bin (2.24-11+deb9u3) ... root@repeater:~# reboot Now that the initial steps are done, do I run asl-menu as the user repeater or root? The readme isn't specific. From: "Steve Zingman" <szingman(a)msgstor.com> To: "Users of Asterisk app_rpt" <app_rpt-users(a)lists.allstarlink.org> Sent: Friday, April 20, 2018 1:12:01 PM Subject: Re: [App_rpt-users] Announcing AllStarLink Asterisk version 1.01 Danny, Did you do this before asl-menu? sudo apt-mark hold raspberrypi-kernel-headers raspberrypi-kernel sudo apt-get update sudo apt-get upgrade -y sudo reboot Steve N4IRS On 4/20/2018 2:09 PM, K5CG wrote: I downloaded the raspberry pi latest [ http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… | http://dvswitch.org/files/ASL_Images/Raspberry_Pi/Stretch/ASL_1.01-20180228… ] I followed the included readme file instructions and It booted fine but the asl-menu does not work correctly for the networking (static IP), and it doesn't set the hostname or domain name. After rebooting at the end of the process everything is the same as it was. Hostname is still "repeater" and IP is still DHCP. I seem to recall having this issue before on an older build. Is there a trick to get this to work or must it be done manually? Danny K5CG _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users(a)lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users(a)lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

3 3

Multiple Cop commands
by John Rudolph- N2YP 14 Jun '18

14 Jun '18

When using cop 61 or 62 to change gpio states can you change more than one pin with the same command or do you have to break it out as one pin at a time? Example: cop,61,GPIO1=0,GPIO4=1,GPIO5=1 If so is this the right format and if not what would it be?

7 12

RTCM [RX Packet Out of Bounds] ***Updated***
by Hayden Honeywood 13 Jun '18

13 Jun '18

For what it is worth, I've used both the BG7TBL and Garmin puck units on the original VOTER boards and had no issues at all. The BG7's were 2016 models and I've never had one fail - yet and like Chuck, I hope Murphy isn't listening. Hayden VK7HH

1 0

GPS hardware recommendation for RTCM Voting
by Sean McCarthy 12 Jun '18

12 Jun '18

Looking for advice on selecting GPS units for an RTCM voting project. I need units that support external active antennas. Thanks, Sean

3 7

Is stats.allstarlink.org down?
by Danny K5CG 08 Jun '18

08 Jun '18

This site can’t be reached stats.allstarlink.org took too long to respond. Try: * Checking the connection * [ chrome-error://chromewebdata/#buttons | Checking the proxy and the firewall ] * Running Windows Network Diagnostics ERR_CONNECTION_TIMED_OUT C:\Windows\System32>ping stats.allstarlink.org Pinging status.allstarlink.org [44.98.254.130] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 44.98.254.130: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)

5 5

Squelch Tail Crash Elimination
by John W Benedict 07 Jun '18

07 Jun '18

Hello, I have ASL running a Dell Slim Form computer all seems to be work quite well, connections, Echolink and local repeater with great audio reports however... I like to know how to eliminate the squelch crash on the tail maybe adding some milliseconds to the receiver audio? The system is a Yaesu DR-1X interfaced with the URIx controller using SimpleUSB in ASL version 20180417 The computer: Dell SFF Version 4.9.0-6-amd64 #1 SMP Debian 4.9.88-1+deb9u1 (2018-05-07) x86_64. I am very novice with Linux and Asterisk but learning bits and pieces... Thank you John de KE5RS _._ . ..... ._. ...

6 11

not as intuitive as EchoLink
by Mark Hilvety 06 Jun '18

06 Jun '18

Ok, I'm a new in-list-ment: and: I find the system cryptic... I'm running linux Mint 18.3 and firefox as a browser.. I can get the list pages for each of the nodes, BUT... HOW do I access the transmit/receive mode for them??? EchoLink has the connect function and a trans/rec togle , I see none on the list pages... Is there some software I need to download or just What special key do I push? WHAT AM I MISSING???

4 3

Test A ECHO-TEST NODE 48230 for me ?
by Mike 05 Jun '18

05 Jun '18

I have framed-up a stand alone echo-test / parrot type node on 48230 Being only framed up, it has much work to be completed on it. More than just window dressing. I wanted it to function on a VPS node and to be able to operate simply on the connect string without any dtmf required. Since there would be no way of knowing if your audio levels are good enough to run dtmf. I need to adjust some timers and such. And I may need to limit both 1 connect at a time and a 5 min connection timer in the future (as it appears to me now). giving anyone a chance to use without interference. I may in the future, make a drop box to pick-up the audio file for additional analytic on www.29993.link (work in progress) So, that's it, just connect to 48230, listen for the 'poorly recorded' prompts (LOL), and help me find a bug ? Perhaps someone can help me with better menu prompts ? Work in progress, it will get better. Please let me know what you think or how to improve it. I have a full duplex latency test destined for the next node on my list. But I hope to keep these 'testing' node numbers permanent tools at your disposal 24/7. In doing this I found a lot of errors in the default config modules.conf of deb9 install (more on this later). But this is the point of playing around at this point for me. 'TESTing', Getting back in practice of the asterisk/app_rpt code with a few useful trivial experiments. 73, ...mike/kb8jnm

1 0

URI GPIO
by Scott Weis 04 Jun '18

04 Jun '18

I'm trying to set up channel steering for a Motorola CDM1250 and have the radio working without a URI. If I ground the channel pins the channels change on the radio fine. Now when I connect the pins to a URI-x gpio1 gpio2 gpio5 and gpio6 It dosent seem to work. I have gpio1=out0 , gpio2=out0, gpio5=out0, gpio6=out0 and when I do a *584=cop,61,GPIO5=1 or *585=cop,61,GPIO5=0 nothing seems to change on the URI, either state I see +5v on the URI. Should it not get pulled to ground? Am I doing something wrong? Thanks & 73 de Scott KB2EAR

4 6

Re: [App_rpt-users] RTCM [RX Packet Out of Bounds] ***Updated***
by Hayden Honeywood 03 Jun '18

03 Jun '18

Hi Kevin, Sorry keep getting confused... the VOTER (thru-hole) board lets you do a Diode calibration. I think the RTCM has the same functionality... it's documented in the manual, but not detailed. It has the switch for it anyway... OK on the baud rate and the messages you have in debug. I'm pretty sure the time on the RTCM's references the master timing source - which has the app_rpt host connected on the same network. Have you checked that your host has the correct time. The only time I saw the GPS Data Time period elasped error was running 4800 baud on the Garmin puck receivers. I changed this to 9600 which fixed the issue. Hayden

1 0