- App_rpt-users - lists.keekles.org

Allmon2 help
by Russell Thomas 20 Jun '18

20 Jun '18

I was trying to install the ASL add-on from the ASL menu but it's not working. attached is a screenshot of the output after i exit out of the menu. 73, Russell Thomas, KV4S Cell: 205.202.1701 DMR: 3101393 D-Star: KV4S AllStar: 47923 EchoLink: KV4S-L (1003254) HamShackHotline: 614 Web: http://KV4S.com

3 2

ASL Digital Radio/MMDVM Intro Tech "NET" Tues June 19 @ 00:30z **********************
by Mike 20 Jun '18

20 Jun '18

A "TECH NET" concerning *"Getting Started with" * Digital Modes / DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR To be held on the Allstar Network at* * *8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018* *Please connect 15 minutes or more in advance for audio checks and the like.** * ** _*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*_ Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net. To help split the 'potential' bandwidth demands, Those _west of the Mississippi_, please connect on *29993* AND_OHIO only_ on *49999* And the rest _east of the Mississippi_ on *29999* So we don't possibly get overwhelmed with personal node streams. Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available *Please connect 15 minutes or more in advance for audio checks and the like.** * *I am looking for someone that can take copy of web links/info mentioned during the net * *to be posted somewhere afterwards and a back-up net control to standby. Please contact by reply to this msg. * _Please forward/distribute this email to interested party's !_ _Plans to have a follow-up net/round-table next month in July are in the works._ *Any last minute/after net info will be posted at __www.29999.link* If you are intending to use DMR, you will need a DMR ID. Current confusion on this and a low availibility of numbers to issue seem to be a problem we 'may' address during the net. *Some quick reference links: */(just a 'starter' reference)/ *Getting started cheap hardware: (not endorsing anything) * *MMDVM:** * https://www.ebay.com/sch/i.html?_nkw=dmr+hotspot&LH_BIN=1 https://www.ebay.com/itm/UHF-VHF-MMDVM-hotspot-OLED-Antenna-Case-Support-P2… --------- *Pi* (make sure you are getting one that fits your hardware/software needs) https://www.ebay.com/itm/Raspberry-Pi-3-Model-B-ARM-Cortex-A53-CPU-1-2GHz-6… https://www.ebay.com/itm/Raspberry-Pi-Zero-V1-3-W-1GHz-512MB-Integrat-WiFi-… --------- *Pi-Star: *https://www.pistar.uk/downloads/ --------- *Most Common 'good' starter radio DMR-UHF:* https://www.ebay.com/itm/TYT-MD-380-UHF-Analog-Digital-Tier-II-DMR-DMR-Radi… Latest Software for the MD380: http://www.tyt888.com/?mod=download ------------- *Code Plug Data :* http://arrl-ohio.org/digital/digital.html - /(for the state of Ohio):/ https://www.repeaterbook.com/repeaters/feature_search.php?state_id=42&type=… https://dmrtexas.net/ ------------- *DVswitch - *dv gateway for allstar* * https://dvswitch.groups.io/g/main/wiki/Home* * https://dvswitch.groups.io/g/main/topics* * https://dvswitch.groups.io/g/main/topic/updated_dvswitch_repository/1897178…

13 25

Node connection issues
by Bryan Fields 20 Jun '18

20 Jun '18

If you have issues with people unable to connect to one of your nodes, please ensure you only have one server registering that node to the iax registration server. If you have more than one server using the same node/password to register to the registration service, this will likely cause different IPs in the nodes file and interment problems connecting to other nodes. The registration service is going to do what it does and register each node if it's got the right password; it's stateless and this is intended. 73's -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net

1 0

Link audio level
by K5CG 19 Jun '18

19 Jun '18

I'm trying to lower the audio level from the link to my RF repeater and I'm not seeing the linkmongain setting making a lick of difference. I have tried -6, -10, -20 and now have... linkmongain=-999 ...in the node section below Audio level settings and above Dial Plan settings but there is no change. I wold expect this value to mute it completely on my transmitter audio. http://docs.allstarlink.org/drupal/node/71 Asterisk 1.4.23-pre.hamvoip-V1.5.3-28- app_rpt-0.327 -04/05/2018 (should be OK, right?) Linux allstar 4.4.44-1-ARCH #1 SMP Mon Jan 23 19:01:18 MST 2017 armv7l GNU/Linux What have I done incorrectly? Thanks Danny K5CG

12 14

Re: [App_rpt-users] current on going net
by Kevin Halton 19 Jun '18

19 Jun '18

Try 45592 Sent from my iPhone > On Jun 19, 2018, at 9:05 PM, Benjamin Naber <Benjamin(a)Project23D.com> wrote: > > 29999 is dropping connections. > > some of you all can connect to a dedicated server with lots of > bandwidth > > 29567 > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)lists.allstarlink.org > http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users > > To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

2 1

Connect issues before the net
by Mike 19 Jun '18

19 Jun '18

If you had a issue connecting 29999/29993/49999 please try again. "Let me know if there is a issue" by reply ...mike/kb8jnm

2 1

first time run
by Pierre Martel 19 Jun '18

19 Jun '18

Hi! I used the how to on the wiki to install a radio less node on a Linode server (64bit) ASL 1.01 All went well Asterisk is running got real good add libc_x86 to run dahdi_test and the result were pretty good. Now I would like to have the server to download its programing from the portal just could not find how to do it. Anyone can point it to me? If it could be added to the wiki I am sure it would help many others

3 4

Reminder: Tech NET Tues June 19 DMR NXDM DStar YSF MMDVM DVswitch
by Mike 18 Jun '18

18 Jun '18

For all the expansion going on in the field of Amateur digital radio, The time has come for us to explain/talk about this in the amateur community as best we can. In purpose thereof, this net should go a long way in bridging some information gaps. For the newb and intermediate. I can say it is the largest growth potential I may ever witness in my lifetime in Amateur Radio. And isn't the term 'growth in ham radio' a switch ? We will be discussing: Digital Modes: DMR /YSF /P25 /DSTAR /NXDN using MMDVM and bridging these to ALLSTAR Net to be held on the Allstar Network at* * *8:30 pm esdst / 00:30 utc - TUES JUNE 19, 2018* *_*Guest Speakers N4IRS Steve & N4IRR Mike of the dev crew at DVswitch/Allstar*_* Introductions to the digital radio field of /software/hardware and relationship/connectivity with Allstar software And as much Q & A at the end as we can sneak in. "Round-table" discussion to follow after the net. To help split the 'potential' bandwidth demands, (So we don't possibly get overwhelmed with personal node streams that are very welcome) Those _west of the Mississippi_, please connect on *29993* AND_OHIO only_ on *49999* And the rest _east of the Mississippi_ on *29999* Echolink nodes *KB8JNM-L ( 155783 )* *east* & *KB8JNM-R ( 804396 ) west* both available. Additional information at www.29999.link We may have a IRLP gateway available but unknown at this time of post, I'll try to update the website with that before the net. Hope to demo a live ASL<>DMR gateway link to DMR TAC (314) or other tba at some point during the net. Please connect "15 minutes in advance" for radio/audio checks. If all goes well, a follow-up net in July. tnx,73, ...mike/kb8jnm

2 1

Happy Father’s Day!
by Kevin Babich 17 Jun '18

17 Jun '18

Happy Father’s Day to all fathers on the list! Kevin J. Babich 219.406.9707 Mobile ***Mobile EMail*** Please excuse any typos and brevity.

1 0

Re: [App_rpt-users] RTCM [RX Packet Out of Bounds] ***Updated***
by Hayden Honeywood 15 Jun '18

15 Jun '18

Is the time in UTC? How far off is the system time? Have you done a full calibration of each board? What baud rate do you run on your GPS's? I tend to use 9600 baud and have had no issues with the GPS's I have used. There is various GPS debug tools available in the RTCM. They are documented here - https://wiki.allstarlink.org/wiki/RTCM_Client#GPS Can you possibly try injecting a 9.6MHz signal in place of the crystal on board? Perhaps you have a variant of James KI0KN's problem where his crystals were off frequency. I can't comment on that as I built all my boards and they have external frequency references. Regards Hayden VK7HH > > From: App_rpt-users <app_rpt-users-bounces(a)lists.allstarlink.org> On > Behalf Of Hayden Honeywood > Sent: Wednesday, May 30, 2018 5:34 PM > To: app_rpt-users(a)lists.allstarlink.org > Subject: Re: [App_rpt-users] RTCM [RX Packet Out of Bounds] ***Updated*** > > > > What is your values in voter.conf for RX buffer (960) and in the RTCM > client for TX buffer (480). Are all RTCM TX buffers set to the same value? > Yes, 480. These values were based upon the math Jim provided, which is a > function of maximum latencies on the network. We rarely have greater than > 1ms to any host on the network. > > > > Are all the GPS's in a location where they cannot be swamped with RF? Yes, > and they utilize PCTEL antennas with filtering for use in RF dense > environments. > > > > Some users have had success with a dedicated RTCM as the master timing > source (with no radio connected). Has it been suspected that an RTCM > doesn’t have the horsepower to handle both functions contemporaneously? > > > > Regards > > Hayden VK7HH > >

5 18