- App_rpt-users - lists.keekles.org

Problem with crashes ticket 0000051
by George Csahanin 02 Dec '09

02 Dec '09

Didn't want to re-open to report my success, but I had downloaded the sources and that was really when it started to fail. But, for grins I did a 'make clean' or 'make distclean', don't remember which. After re-compile works like a champ! Did my "goes anywhere" change to the source for FT897, ID speed and Freq mods, and I'm back in business. Thanks for looking into it. GC George J Csahanin W2DB Cedar Park, TX

1 0

Re: [App_rpt-users] *just for fun* ACID app_rpt usbradio on 64bit Linux / 64bit Centos
by hwstar＠rodgers.sdcoxmail.com 01 Dec '09

01 Dec '09

> > From: Steve Gladden <steve(a)michiganbroadband.com> > Date: 2009/12/01 Tue AM 09:45:34 PST > To: app_rpt <App_rpt-users(a)qrvc.com> > Subject: [App_rpt-users] *just for fun* ACID app_rpt usbradio on 64bit Linux > / 64bit Centos > > Is app_rpt zaptel usbradio and all supported or expected to work/not > work on a 64bit Linux installation? > Is it expected to work / not work? > I tried it just for fun and have not been able to get it to compile. > I need to know if I should be completely avoiding 64bit Linux or if I > should also be trying it out there as well. > > Thanks! > > Steve > > > > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users > I never tried this myself, and I'd be suprised if there were NO issues. Steve WA6ZFT

1 0

Saving config files in Limey Linux
by Carl Swanson 01 Dec '09

01 Dec '09

Hello group... This might sound like a newb question, but I have been trying to save my changes to the conf files (like rpt.conf, extensions.conf, etc) using nano, and each time I make a change, save it, and then after issuing a reboot to the computer, it comes back up like I hadn't made any changes at all. Is there an explicit "write files to flash" command in Limey Linux that I am missing? 73, Carl, K6CRS ___________________________________________ Carl Swanson, CBRE/CEA/CBNT Broadcast Engineer, Dial-Global 24/7 Formats HAM: K6CRS & VE3SSO / GMRS: WPOJ453 / SHIP: WDD5353 GROL w/SRE: PG-GB-03704 / US Army MARS: AAM9ICA/AAR9MM

2 1

kickstart file to install app_rpt on a XEN VM?
by Ramesh Dhami (VA3UV) 30 Nov '09

30 Nov '09

Hi Guys; I am experimenting with XEN and setting up a VM on a TEST box. I'd like to be able to install app_rpt / ACID by specifying a url for the kickstart file as I setup my VM. I thought I had seen this in one of the repositories, anyone help? Thanks! Ramesh.

2 2

Getting senile
by George Csahanin 29 Nov '09

29 Nov '09

Simple question everyone, I think. Trying to upgrade the chan_usbradio.c, never realized I had the original in service. I've tried every what I know of to get it into the box, including cut and paste, and keep getting this compile error. I've seen this before, it seemed to do with CR/LF and UNIX vs. dos, but still seeing this, and when I look at the source under vi it looks just fine. Just get compile errors. I know this just takes a gentle nudge to get me going the right way, and after 4 hours I'm going out for din-din... Enough radio play for one day. Its been a total bust. Upgraded app_rpt too, no errors, it just blows up when I run it. Thanks, and hope everyone had a good holiday weekend. GeorgeC W2DB AllstarLink 2360. [root@radio asterisk]# make menuselect/menuselect --check-deps menuselect.makeopts Generating embedded module rules ... make[1]: Entering directory `/usr/src/asterisk/utils' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/asterisk/utils' make[1]: Entering directory `/usr/src/asterisk/agi' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/asterisk/agi' make[1]: Entering directory `/usr/src/asterisk/res' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/src/asterisk/res' make[1]: Entering directory `/usr/src/asterisk/channels' [CC] chan_usbradio.c -> chan_usbradio.o chan_usbradio.c: In function â?~hidthreadâ?T: chan_usbradio.c:1360: error: â?~t_pmr_chanâ?T has no member named â?~txrxblankingtimeâ?T chan_usbradio.c: In function â?~usbradio_readâ?T: chan_usbradio.c:2417: error: â?~struct <anonymous>â?T has no member named â?~txCtcssReadyâ?T chan_usbradio.c:2430: error: â?~struct <anonymous>â?T has no member named â?~txCtcssReadyâ?T chan_usbradio.c: In function â?~store_configâ?T: chan_usbradio.c:4023: error: â?~RXSQDELAYBUFSIZEâ?T undeclared (first use in this function) chan_usbradio.c:4023: error: (Each undeclared identifier is reported only once chan_usbradio.c:4023: error: for each function it appears in.) chan_usbradio.c:4044: error: â?~t_pmr_chanâ?T has no member named â?~rxSquelchDelayâ?T chan_usbradio.c:4080: error: â?~t_pmr_chanâ?T has no member named â?~txrxblankingtimeâ?T make[1]: *** [chan_usbradio.o] Error 1 make[1]: Leaving directory `/usr/src/asterisk/channels' make: *** [channels] Error 2 George J Csahanin W2DB Cedar Park, TX

1 0

Default *2<node#> MONITOR mode is not just monitor to far end.
by Steve Gladden 29 Nov '09

29 Nov '09

Have a node setup (repeater) with usbradio.. Using mostly default setup. at the moment I have rx /repeater setup for carrier access (no ctcss) Been testing this and the far end nodes report that they get get repeater tones & hang time from me if I try to just 'monitor' them using the *2 monitor functionality.. *3 works as expected but when I try to use *2 I'm getting those unexpected results and the far end is experiencing some grief/confusion. Am I misunderstanding how this should work? Or are there any common gotchyas where you'd think you're just monitoring but it's doing more than that? Sorry this is a bit vague.. I probably need to bring up another note and test this and report step by step what's happening. Thanks Steve -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 6

app_rpt reverse autopatch configuration & setup Looking for help or examples..
by Steve Gladden 29 Nov '09

29 Nov '09

I am setting up an autopatch on a full duplex repeater as detailed at: http://app-rpt.qrvc.com/node/63 I'm not finding any info on how reverse autopatch works or how to set it up.. I'd like to be able to call into app_rpt and gain access to the radio preferably password (DTMF) protected. I'm not finding any documentation that explains reverse autopatch and how to set it up. Any ideas where I should be looking? I'm very familiar with this at a high level (SIP/IAX) provider setup etc. I just need the specifics on how to bring an inbound call into app_rpt and the proper way to pass the call to it what to do in the dialplan when calling rpt. Should I be looking through app_rpt.c source code for this? or is it documented in a manual somewhere? Thanks Steve -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 1

IRLP board support?
by Yokshs 26 Nov '09

26 Nov '09

Hello, This is my first post, so pardon me if this has already been covered. I wonder if there is any way to add native support for the IRLP board to app-rpt? I'd like to avoid using CM108 Fobs in favor of my IRLP board. I already have a fan control circuit and remote transmitter shutoff via the AUX ports, plus I'd like to keep my hardware DTMF decoder. If native support for the IRLP board isn't possible, does anyone have any suggestions to get Echolink, IRLP and Asterisk working under TheLinkBox with my IRLP board? My attempts so far to install the ACID CD, followed by IRLP software have been problematic. I've also tried the opposite with limited success. Thanks for any suggestions. 73, Kyle K0KN Olathe, KS

2 1

Acid Install
by kd7yat＠cox.net 26 Nov '09

26 Nov '09

Ed here, I am new to the group and having install issues. I am good through the install, changing the root password, adding my node and registration password and call sign, and then the trouble begins. I get a test login:, Nothing I try here works, all I get is, login incorrect. I have downloaded and burned 2 ISO disc's and have re-installed several times. The USB fob blinks and everything seems fine to this point. Have I missed something? Everyone have a great Thanksgiving. Ed

2 1

node passing pl tones
by Jon Rorke 26 Nov '09

26 Nov '09

Hi All, a friend of mine is trying to set up a couple of simplex nodes based on the latest acid install. He has the 2 nodes up and running. They are connected together on a local LAN.When a signal is transmitted to the one node, it seems to be passed down the line to the remote node. Normally I thought that App_rpt would filter the audio path between 300- 3khZ. But in this case the pl tone is being passed to the remote node. I believe he has the correct settings for the URIs for each radio. Rx audio is set to flat since it is fed by discriminator audio and squelch is set to carrier from usbinvert. Ctcss from is set to no and the pl tones are commented out. The tx settings are txprelim is set to yes as the tx audio is connected to the modulator and not the mic input. TXtoctype= notone and TXmixa = voice. This should not send any tone out the local transmitter. If he keys up the other end with carrier Sq and no pl on transmit on his handie, then no pl tone gets sent. If he does key up with a pl tone it seems to be sent to the remote transmitter. Anybody have any ideas? None of my nodes do this. Thanks, Jon VA3RQ

1 0