- App_rpt-users - lists.keekles.org

More - Replacing an IRLP node with App-rpt node
by Randy Hammock 10 Apr '09

10 Apr '09

[ I'm resending this to the group. I hate that replies go only to the original sender. ] The version of the chan_irlp software I'm running has all the support functions that a normal IRLP node has. Therefore, the same methods are used. Place the node you want to lock out in the $CUSTOM/lockout_list file. For example, to lockout node 1234, put stn1234 in the the above mentioned file. If you want to lockout all reflectors, put ALLREF in the file. This will prevent calling or receiving calls from the listed nodes. On Apr 10, 2009, at 9:51 AM, Matt Beasant wrote: > Hi Stephen, > > Yes I see that such a timer exists for the remote base but not for a > "regular" node. > > Is there a way I can block connections to a specific node on IRLP > ( or Echolink )? > > Just wondering if that might be good for a temporary work around. > > Matt > G4RKY > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)qrvc.com > http://qrvc.com/mailman/listinfo/app_rpt-users -- Randy Hammock KC6HUR http://kc6hur.net/~rhammock/ http://irlp.kc6hur.net/ If there are no horses in heaven, then when I die, I want to go where they went.

1 0

More - Replacing an IRLP node with App-rpt node
by Matt Beasant 10 Apr '09

10 Apr '09

Right, thats got that bit sorted. Now for my next challenge..... The original IRLP node had an inactivity timeout that would tear down any connection that was not specifically set up to be permanent. How could I achieve this on my app_rpt node? My problem is that I have a rogue user who connects to the WIN system late at night as he likes to listen in (!!!) I dont mind as the repeater is usually very quiet anyway at this time of night. Problem is he falls asleep ( I guess ) and doesn't disconnect the node from the reflector. Then in the morning a local QSO gets going on the local repeater and bam, we get blocked from the WIN system - and I don't blame them either! Anyone got any ideas? I totally cracked my news and clock setting problems now and it rocks! Thanks, Matt G4RKY

2 2

Size of partition created by ACID Install Disk
by Ramesh Dhami (VA3UV) 08 Apr '09

08 Apr '09

Hi Steve; In the next release of the ACID ISO, would it be possible to prompt the user for the size of the partition so that the installation does not default to creating a 4GB partition? Most HDD's these days are at least 80GB if not multiples of that. While the app_rpt code itself fits in very easily in a 4GB partition, it would be nice to have the option to create a larger partition for other add-ons, etc.... Thanks! Ramesh.

1 0

Re: [App_rpt-users] Addition of a second node - messed up node 1
by Stephen Rodgers 08 Apr '09

08 Apr '09

Ramesh, I don't know where the problem would be off-hand, but what I would try going back to a single node system, delete the tune file(s) and gradually add things until it either works, or you can determine the thing that breaks it. Do things one step at a time noting the results at each step. Then revert back to the prior step to see if functionallity is restored. One thing that mildly concerns me is that usbradio_tune.conf should never, ever be copied. Tuning must be done from scratch on an addtional nodes as they are added. Steve WA6ZFT Stephen Rodgers wrote: > Ramesh, > > I don't know where the problem would be off-hand, but what I would try > going back to a single node system, delete the tune file(s) and > gradually add things until it either works, or you can determine the > thing that breaks it. Do things one step at a time noting the results at > each step. Then revert back to the prior step to see if functionallity > is restored. > > One thing that mildly concerns me is that usbradio_tune.conf should > never, ever be copied. Tuning must be done from scratch on an addtional > nodes as they are added. > > > Steve > WA6ZFT > > > Ramesh Dhami (VA3UV) wrote: >> Hi Steve and all; >> >> I attempted adding a new node (2424) onto my existing system where I >> have 2182 and 2248 running. >> >> 2182 is a real node using a usbfob; 2248 is my chan_dstar node. >> >> >> I followed the instructions in the ACID admin guide when adding the new >> node - modified the 4 files as instructed (rpt.conf, iax.conf, >> extensions.conf and usbradio.conf). >> >> That all went fine - got node 2424 setup and reporting to the stats >> page. I was able to use CLI and connect 2182 to 2424. I then noticed >> that there was no audio passing from 2182 over to 2424. >> >> I then tried issuing DTMF from 2182 and no go - CLI did not show my DTMF! >> >> Speaking with Jon (VA3RQ) who recently setup a 2 node system, we edited >> the rpt.conf and usbradio.conf files such that the 2 nodes specified >> Radio/usb0 and Radio/usb1 respectively. Similarly, we renamed and >> edited the usbradio_tune_usb.conf file to reference usb0, and also >> renamed the file name to usbradio_tune_usb0.conf and >> usbradio_tune_usb1.conf respectively. >> >> No luck - still no audio into the (original) fob. Unfortunately, I'm >> unable to test audio into the new fob since the mods are not complete! >> >> Since I had saved all of the original files, I rolled back to the >> original 4 files (single node, 2182) and unfortunately, I have the same >> symptoms - no audio into the fob. In fact when I go into debug mode, I >> do not even see a carrier from the fob. >> >> Audio out of the fob works fine! >> >> Is it possible that I've messed up something else when trying to add the >> second node - i.e., something other than the 4 files mentioned that >> would have an impact on the fobs ability to sense any of the inputs? >> >> >> Deaf in Toronto.... >> >> Ramesh. >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)qrvc.com >> http://qrvc.com/mailman/listinfo/app_rpt-users >> > >

2 1

Addition of a second node - messed up node 1
by Ramesh Dhami (VA3UV) 06 Apr '09

06 Apr '09

Hi Steve and all; I attempted adding a new node (2424) onto my existing system where I have 2182 and 2248 running. 2182 is a real node using a usbfob; 2248 is my chan_dstar node. I followed the instructions in the ACID admin guide when adding the new node - modified the 4 files as instructed (rpt.conf, iax.conf, extensions.conf and usbradio.conf). That all went fine - got node 2424 setup and reporting to the stats page. I was able to use CLI and connect 2182 to 2424. I then noticed that there was no audio passing from 2182 over to 2424. I then tried issuing DTMF from 2182 and no go - CLI did not show my DTMF! Speaking with Jon (VA3RQ) who recently setup a 2 node system, we edited the rpt.conf and usbradio.conf files such that the 2 nodes specified Radio/usb0 and Radio/usb1 respectively. Similarly, we renamed and edited the usbradio_tune_usb.conf file to reference usb0, and also renamed the file name to usbradio_tune_usb0.conf and usbradio_tune_usb1.conf respectively. No luck - still no audio into the (original) fob. Unfortunately, I'm unable to test audio into the new fob since the mods are not complete! Since I had saved all of the original files, I rolled back to the original 4 files (single node, 2182) and unfortunately, I have the same symptoms - no audio into the fob. In fact when I go into debug mode, I do not even see a carrier from the fob. Audio out of the fob works fine! Is it possible that I've messed up something else when trying to add the second node - i.e., something other than the 4 files mentioned that would have an impact on the fobs ability to sense any of the inputs? Deaf in Toronto.... Ramesh.

1 0

Source code browsing and anonymous SVN access
by Stephen Rodgers 04 Apr '09

04 Apr '09

All of our source code is now browsable and downloadable on line for those who are curious or who like to tinker. To browse the source code for ACID, Limey Linux, and the Asterisk source files (including app_rpt, configuration files, and sound files) visit: http://qrvc.com/viewvc/projects/allstar/?root=svn To do an anonymous checkout of the latest asterisk code, app_rpt, configuration files, and sound files, execute the following svn command from the command line: svn co svn://qrvc.com/projects/allstar/astsrc-1.4.23-pre/trunk Steve WA6ZFT

1 0

Problem with CHAN_IRLP
by Steve Agee 04 Apr '09

04 Apr '09

I get the following when I set debug to level 5 and use IAXRPT to try and connect to IRLP 49453.... This is Asterisk node 2394 and the problem is intermittent about 50% of the time. === begin cut and paste ==== Verbosity is at least 5 == Parsing '/var/lib/asterisk/rpt_extnodes': Found [Apr 3 23:16:36] NOTICE[2563]: app_rpt.c:6482 connect_link: Connect attempt to node 49453 [Apr 3 23:16:36] NOTICE[2563]: app_rpt.c:6483 connect_link: Mode: Monitor [Apr 3 23:16:36] NOTICE[2563]: app_rpt.c:6484 connect_link: Connection type: Normal [Apr 3 23:16:36] NOTICE[2563]: app_rpt.c:6623 connect_link: rpt (remote) initiating call to irlp/9453 on irlp/2074 [Apr 3 23:16:37] NOTICE[3994]: app_rpt.c:4227 wait_interval: Delay interval = 500 [Apr 3 23:16:37] NOTICE[2540]: chan_irlp.c:803 irlp_reader: irlp node attempted connect from 208.67.255.163 with no node info [Apr 3 23:16:37] NOTICE[2540]: chan_irlp.c:846 irlp_reader: irlp channel format set to ADPCM [Apr 3 23:16:37] NOTICE[3994]: app_rpt.c:4231 wait_interval: Delay complete -- Hungup 'Zap/pseudo-40083051' [Apr 3 23:16:38] NOTICE[4099]: app_rpt.c:4227 wait_interval: Delay interval = 500 [Apr 3 23:16:39] NOTICE[4099]: app_rpt.c:4231 wait_interval: Delay complete -- <Zap/pseudo-2003096150> Playing '/home/irlp/astrun/astplay' (language 'en') -- Hungup 'Zap/pseudo-2003096150' -- Hungup 'Zap/pseudo-1709847941' -- <Zap/pseudo-1777775359> Playing 'rpt/node' (language 'en') [Apr 3 23:17:08] WARNING[4123]: file.c:1205 waitstream_core: Unexpected control subclass '13' -- <Zap/pseudo-1777775359> Playing 'digits/4' (language 'en') -- <Zap/pseudo-1777775359> Playing 'digits/9' (language 'en') -- <Zap/pseudo-1777775359> Playing 'digits/4' (language 'en') -- <Zap/pseudo-1777775359> Playing 'digits/5' (language 'en') -- <Zap/pseudo-1777775359> Playing 'digits/3' (language 'en') -- <Zap/pseudo-1777775359> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-1777775359' [Apr 3 23:17:13] NOTICE[4214]: app_rpt.c:4227 wait_interval: Delay interval = 500 [Apr 3 23:17:13] NOTICE[4214]: app_rpt.c:4231 wait_interval: Delay complete -- <Zap/pseudo-729549503> Playing '/home/irlp/astrun/astplay' (language 'en') -- Hungup 'Zap/pseudo-729549503' === end cut and paste ==== N5ZUA

1 0

URI's I/O fan control
by Will Wright 02 Apr '09

02 Apr '09

Hello to the group, I wonder if anyone would like to share a timing circuit and it's programming use with one of the URI I/O pins, lets say to control a fan to keep the transmitter cool on transmit and off when not in transmit. Thanks Will / W4WWM

4 3

Please try posting issues and questions to this list first!
by Stephen Rodgers 01 Apr '09

01 Apr '09

All, If you have a question or an issue with app_rpt,chan_irlp,chan_echolink.limey linux or ACID, which can be shared in a public forum, please do post it to this list first! Contacting the developers initially should only be used for confidential messages or communications which is off-topic which don't belong in a public forum in the first place. This is more efficient because everyone can participate and learn from the answers and it ensures that the the authority most cognizant sees the message and can provide the best answer. It also provides a record of the questions and answers which can be browsed in the archives. When answering messages on the list, please be sure that the response goes back to the mailing list and not just to the originator! Our mailing list configuration defaults to sending the response directly to the originator of the message for privacy reasons so you will have to manually override this so that everyone gets to see the response. Steve WA6ZFT

1 0

Changes to CHAN_IRLP
by Steve Agee 01 Apr '09

01 Apr '09

Jim, I understand you are considering changes to chan_irlp that would prohibit simultaneous connections to both systems at the same time. I'd ask that you at least leave a user selectable flag in the file. For example, on the IRLP Dallas Reflector channel five, I have permission to run other voip systems at the same time. If simultaneous connections are not permitted then I will have to go back to running a separate IRLP node as well. Thanks, N5ZUA

1 0