- App_rpt-users - lists.keekles.org

[App_rpt] asterisk console commands missing?
by Eric Fort 12 Oct '08

12 Oct '08

I'm working on configuring my app_rpt node for autopatch and such. what happened to "sip reload" in the asterisk CLI? How does one reload sip.conf? Eric AF6EP

3 4

Re: [App_rpt] Problems with Echolink on app_rpt
by hwstar＠rodgers.sdcoxmail.com 12 Oct '08

12 Oct '08

Matt, If you followed the instructions is the ACID sysadmin manual, everything should be fine. Since database show is working, most of it is up and running. You might want to post your echolink.conf file with rhe password obiliterated to the list so that we can see if it is ok. If you try to connect before everyone gets an updated list the connection will fail. Please try after about an hour so that everyone gets a list with your node in it. Something else to check: Is your node showing up on echolink.org? Finally, don't worry about this message: > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13' Steve WA6ZFT > > From: "Matt Beasant" <g4rky(a)yahoo.co.uk> > Date: 2008/10/11 Sat AM 01:55:47 PDT > To: "Asterisk Repeater Controler" <app_rpt(a)lists.illiana.net> > Subject: [App_rpt] Problems with Echolink on app_rpt > > Dear all, > > I've upgraded my node to the latest release and have attempted to get > Echolink working on my node. > > However, I'm having problems and wondered if anyone could point me in the > right direction for a fix? > > When I try to make an outgoing call from my node to an echolink node, I > instantly get the "node connection failed" message. > > On the CLI, the announcement text is immediately preceeded by: > > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13' > > When I try to make a call IN to my node form an Echolink node, I see: > > ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for > a/ipaddr/81.156.xxx.xxx > > However, I do frequently see messages such as: > > NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink server > europe.echolink.org > > and the database show command works fine also. > > Do I need to follow these instructions here : > http://app-rpt.qrvc.com/echolink.html or is my node already up to date > enough to not have to do this? > > I also noted the existence of an IRLP config file in the config examples - I > need IRLP functionality on my node and so is this something I can use too? > > Thanks in advance for any and all help received! > > Kind regards, > > Matt > G4RKY > node 2250 & 2237 > > _______________________________________________ App_rpt mailing list App_rpt(a)lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt

5 7

Re: [App_rpt] Problems with Echolink on app_rpt
by hwstar＠rodgers.sdcoxmail.com 11 Oct '08

11 Oct '08

Matt, Please post your echolink.conf with the password obliterated and your extensions.conf. Steve WA6ZFT > > From: "Matt Beasant" <g4rky(a)yahoo.co.uk> > Date: 2008/10/11 Sat AM 03:28:01 PDT > To: "Asterisk Repeater Controler" <app_rpt(a)lists.illiana.net> > Subject: Re: [App_rpt] Problems with Echolink on app_rpt > > Ah, I've managed to fix the main problem and can now initiate connections > outbound and all is fine, however inbound connections end up with this > result on my console and a "connection failed" from the Echolink node I was > dialling in from... > > Any thoughts anyone? > > Thanks in advance, > > Matt > > [Oct 11 11:24:31] NOTICE[6210]: chan_echolink.c:2175 do_new_call: new > CALL=MB7IBA-L,ip=81.156.xxx.xxx,name= Barry Wales UK > == Starting echolink/el0-17 at radio-secure,2250,1 failed so falling back > to exten 's' > == Starting echolink/el0-17 at radio-secure,s,1 still failed so falling > back to context 'default' > [Oct 11 11:24:31] WARNING[6494]: pbx.c:2481 __ast_pbx_run: Channel > 'echolink/el0-17' sent into invalid extension 's' in context 'default', but > no invalid handler > [Oct 11 11:24:31] NOTICE[6210]: chan_echolink.c:2175 do_new_call: new > CALL=MB7IBA-L,ip=81.156.xxx.xxx,name= Barry Wales UK > == Starting echolink/el0-18 at radio-secure,2250,1 failed so falling back > to exten 's' > == Starting echolink/el0-18 at radio-secure,s,1 still failed so falling > back to context 'default' > [Oct 11 11:24:31] WARNING[6495]: pbx.c:2481 __ast_pbx_run: Channel > 'echolink/el0-18' sent into invalid extension 's' in context 'default', but > no invalid handler > > > > > 2008/10/11 Matt Beasant <g4rky(a)yahoo.co.uk> > > > Dear all, > > > > I've upgraded my node to the latest release and have attempted to get > > Echolink working on my node. > > > > However, I'm having problems and wondered if anyone could point me in the > > right direction for a fix? > > > > When I try to make an outgoing call from my node to an echolink node, I > > instantly get the "node connection failed" message. > > > > On the CLI, the announcement text is immediately preceeded by: > > > > WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13' > > > > When I try to make a call IN to my node form an Echolink node, I see: > > > > ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for > > a/ipaddr/81.156.xxx.xxx > > > > However, I do frequently see messages such as: > > > > NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink > > server europe.echolink.org > > > > and the database show command works fine also. > > > > Do I need to follow these instructions here : > > http://app-rpt.qrvc.com/echolink.html or is my node already up to date > > enough to not have to do this? > > > > I also noted the existence of an IRLP config file in the config examples - > > I need IRLP functionality on my node and so is this something I can use too? > > > > Thanks in advance for any and all help received! > > > > Kind regards, > > > > Matt > > G4RKY > > node 2250 & 2237 > > > > _______________________________________________ App_rpt mailing list App_rpt(a)lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt

1 0

[App_rpt] Problems with Echolink on app_rpt
by Matt Beasant 11 Oct '08

11 Oct '08

Dear all, I've upgraded my node to the latest release and have attempted to get Echolink working on my node. However, I'm having problems and wondered if anyone could point me in the right direction for a fix? When I try to make an outgoing call from my node to an echolink node, I instantly get the "node connection failed" message. On the CLI, the announcement text is immediately preceeded by: WARNING[5786] file.c:1198 waitstream_core: Unexpected control subclass '13' When I try to make a call IN to my node form an Echolink node, I see: ERROR[2508]: chan_echolink.c:2165 do_new_call: Cannot find DB entry for a/ipaddr/81.156.xxx.xxx However, I do frequently see messages such as: NOTICE[2507]: chan_echolink.c:1758 sendcmd: Received OK from Echolink server europe.echolink.org and the database show command works fine also. Do I need to follow these instructions here : http://app-rpt.qrvc.com/echolink.html or is my node already up to date enough to not have to do this? I also noted the existence of an IRLP config file in the config examples - I need IRLP functionality on my node and so is this something I can use too? Thanks in advance for any and all help received! Kind regards, Matt G4RKY node 2250 & 2237

1 2

[App_rpt] agi programming
by James Nessen 11 Oct '08

11 Oct '08

has anyone done any agi programming with their setup? If so, care to share some config examples on how you integrated it into the dialplan, etc? I have a remote control function that i built for IRLP that i would like to port over to asterisk, but without seeing examples lack a starting point. Thanks. Jim / K6JWN Nodes 2142, 2165, 2190 and 2191

1 0

Re: [App_rpt] Error on asterisk box
by John Yaldwyn 11 Oct '08

11 Oct '08

Hi John, Can you post the IBM model (XXXX-YYY number) concerned please? Cheers, John -----Original Message----- From: app_rpt-bounces(a)lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of Jon Rorke Sent: Saturday, 11 October 2008 04:15 To: app_rpt(a)lists.illiana.net Subject: Re: [App_rpt] Error on asterisk box Hi All, I just wanted to let you know that adding the noapic to the grub.conf file seems to have cured the lockup error issue I was experiencing on my IBM box. Also in the BIOS the APM mode was on. Turning it off did not fix the problem but adding the noapic did the trick! By the way my Centos is 2.6.18-92.1.10.el5 So its been running nonstop now for over a day and a half with no problems. Thanks, for the help. Jon VA3RQ > Jon, > > This sounds to me like a problem in the PC itself. > > This is a shot in the dark: the APIC's on on some PC's are flaky under > linux. > > You could try adding noapic to the kernel boot line in /etc/grub.conf: > > >> > # grub.conf generated by anaconda >> > # >> > # Note that you do not have to rerun grub after making changes to >> > this file # NOTICE: You do not have a /boot partition. This means that >> > # all kernel and initrd paths are relative to /, eg. >> > # root (hd0,0) >> > # kernel /boot/vmlinuz-version ro root=/dev/hda1 >> > # initrd /boot/initrd-version.img >> > #boot=/dev/hda >> > default=0 >> > timeout=5 >> > splashimage=(hd0,0)/boot/grub/splash.xpm.gz >> > hiddenmenu >> > title CentOS (2.6.18-92.1.13.el5) >> > root (hd0,0) >> > kernel /boot/vmlinuz-2.6.18-92.1.13.el5 ro noapic root=LABEL=/ >> > initrd /boot/initrd-2.6.18-92.1.13.el5.img >> > title CentOS (2.6.18-53.el5) >> > root (hd0,0) >> > kernel /boot/vmlinuz-2.6.18-53.el5 ro root=LABEL=/ >> > initrd /boot/initrd-2.6.18-53.el5.img >> > > I have an IBM box which does has to have this done in order to stay > working. The groub.conf above is from that box. > > > Steve > WA6ZFT > _______________________________________________ App_rpt mailing list App_rpt(a)lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt

2 1

[App_rpt] New Asterisk w/app_rpt Package Released
by Steven Henke 10 Oct '08

10 Oct '08

Greetings to the Group, Just in time for the weekend, there is a new release of Asterisk with app_rpt Amateur Radio Over IP software available. This new release is a network install that insures that you always get the latest assembled and tested software from our source code repository. You can upgrade from an earlier software release by using the Backup and Restore utility. If you don't have a CDROM drive, you can install from a USB pen drive. The Echolink channel driver and configuration file are included and instructions are on the web site. Check it out at "http://www.xelatec.com/xipar/netinstall" and enjoy! 73, Steven Henke, W9SH

2 5

Re: [App_rpt] Error on asterisk box
by Jon Rorke 10 Oct '08

10 Oct '08

Hi All, I just wanted to let you know that adding the noapic to the grub.conf file seems to have cured the lockup error issue I was experiencing on my IBM box. Also in the BIOS the APM mode was on. Turning it off did not fix the problem but adding the noapic did the trick! By the way my Centos is 2.6.18-92.1.10.el5 So its been running nonstop now for over a day and a half with no problems. Thanks, for the help. Jon VA3RQ > Jon, > > This sounds to me like a problem in the PC itself. > > This is a shot in the dark: the APIC's on on some PC's are flaky under > linux. > > You could try adding noapic to the kernel boot line in /etc/grub.conf: > > >> > # grub.conf generated by anaconda >> > # >> > # Note that you do not have to rerun grub after making changes to this file >> > # NOTICE: You do not have a /boot partition. This means that >> > # all kernel and initrd paths are relative to /, eg. >> > # root (hd0,0) >> > # kernel /boot/vmlinuz-version ro root=/dev/hda1 >> > # initrd /boot/initrd-version.img >> > #boot=/dev/hda >> > default=0 >> > timeout=5 >> > splashimage=(hd0,0)/boot/grub/splash.xpm.gz >> > hiddenmenu >> > title CentOS (2.6.18-92.1.13.el5) >> > root (hd0,0) >> > kernel /boot/vmlinuz-2.6.18-92.1.13.el5 ro noapic root=LABEL=/ >> > initrd /boot/initrd-2.6.18-92.1.13.el5.img >> > title CentOS (2.6.18-53.el5) >> > root (hd0,0) >> > kernel /boot/vmlinuz-2.6.18-53.el5 ro root=LABEL=/ >> > initrd /boot/initrd-2.6.18-53.el5.img >> > > I have an IBM box which does has to have this done in order to stay > working. The groub.conf above is from that box. > > > Steve > WA6ZFT >

1 0

[App_rpt] ACID updete soon
by hwstar＠rodgers.sdcoxmail.com 10 Oct '08

10 Oct '08

Regarding ACID... As soon as I get back from my Fishing and Repeater expedition in Bishop, CA , I will be updating files.tar.gz with the new asterisk version. For those of you with very recent installs of ACID, all you;ll need to do is download a new version of astupd.sh and run it. Steve WA6ZFT In Bishop in the Eastern Sierras. > > From: "Steven Henke" <steve.w9sh(a)gmail.com> > Date: 2008/10/10 Fri AM 05:24:11 PDT > To: App_rpt(a)lists.illiana.net > Subject: [App_rpt] New Asterisk w/app_rpt Package Released > > Greetings to the Group, > > Just in time for the weekend, there is a new release of Asterisk with > app_rpt Amateur Radio Over IP software available. > > This new release is a network install that insures that you always get > the latest assembled and tested software from our source code > repository. > > You can upgrade from an earlier software release by using the Backup > and Restore utility. > > If you don't have a CDROM drive, you can install from a USB pen drive. > > The Echolink channel driver and configuration file are included and > instructions are on the web site. > > Check it out at "http://www.xelatec.com/xipar/netinstall" and enjoy! > > 73, > > Steven Henke, W9SH > _______________________________________________ > App_rpt mailing list > App_rpt(a)lists.illiana.net > http://lists.illiana.net/mailman/listinfo/app_rpt >

1 0

[App_rpt] New ACID version uploaded to dl.allstarlink.org
by Stephen Rodgers 10 Oct '08

10 Oct '08

A new ACID version has been uploaded: 1. App_rpt version 0.151 supports chan_echolink and local messages 2. Screen program added 3. chan_echolink channel driver 4. Asterisk update script astupd.sh The current install iso has not been affected, but if you are in the middle of an install, it might be a good idea to start over as the scripts have changed. Steve WA6ZFT

5 6