December 2010 - App_rpt-users - lists.keekles.org

Fwd: Did something change
by Chuck Kraly 23 Dec '10

23 Dec '10

---------- Forwarded message ---------- From: Chuck Kraly <ckraly(a)gmail.com> Date: Thu, Dec 23, 2010 at 9:47 AM Subject: Did something change To: app_rpt mailing list <app_rpt-users(a)qrvc.com> or is it a hiccup on my end.... I wanted to rebuild a CF card for my node 27064 I downloaded the latest ISO, did the install and noticed that the build is "the old style"....no "usb27064.conf" and such. It follows the older build setup and that includes the way things are labeled in the rpt.conf stanzas. Did the ISO get reverted back or did I screw something up (again) Chuck K0XM 27064 and many more under the BYRG

2 1

Cannot receive incoming calls
by Yokshs 22 Dec '10

22 Dec '10

Hello, I'm operating two servers (at separate sites), and seem to have most functionality, except for incoming calls. Webtransceiver and Phone portal work, but connects from other nodes to mine fail, and produce the following error message.. Any ideas? I've double checked port 4569 is forwarded in the routers to the correct IP. Thanks, 73. Kyle K0KN localhost*CLI> rpt fun 27130 *32210 [Dec 22 13:52:29] WARNING[1394]: chan_iax2.c:9400 socket_process: I don't know how to authenticate radio to 99.127.233.124 localhost*CLI> rpt fun 27130 *32211 [Dec 22 13:52:13] WARNING[1391]: chan_iax2.c:9400 socket_process: I don't know how to authenticate radio to 99.127.233.124 localhost*CLI> rpt fun 27130 *32212 [Dec 22 13:52:19] WARNING[1391]: chan_iax2.c:9400 socket_process: I don't know how to authenticate radio to 99.127.233.124 localhost*CLI> rpt fun 27130 *32213 [Dec 22 13:52:33] WARNING[1395]: chan_iax2.c:9400 socket_process: I don't know how to authenticate radio to 69.148.20.94 localhost*CLI> rpt fun 27130 *32214 [Dec 22 13:52:35] WARNING[1389]: chan_iax2.c:9400 socket_process: I don't know how to authenticate radio to 69.148.20.94 localhost*CLI> rpt fun 27130 *32215 [Dec 22 13:52:37] WARNING[1389]: chan_iax2.c:9400 socket_process: I don't know how to authenticate radio to 69.148.20.94 localhost*CLI> rpt fun 27130 *327132

2 1

Interface Card for Pico Node/BeagleBoard
by Jim Duuuude 22 Dec '10

22 Dec '10

For those who may be interested, the radio interface card for the BeagleBoard (called the "LOX" board) is working. There were a few prototype circuit boards produced, and, if anyone is interested in getting one NOW, I'm sure that DMK would be willing to make a hand-assembled board (at a higher price then a normal board, because of hand-assembly). The production boards should be available sometime in Feb. 2011, but if you REALLY want one now, Im sure that we can accommodate you. If so, send me an email. JIM WB6NIL

1 0

one-way connection making
by Ken 22 Dec '10

22 Dec '10

I have two nodes, behind a common router, that are quite similar, except that - on the internet side one appears as port 4569 - and the other as port 4568. For the longest time, I have found that I can connect only in one direction. In the other direction I get the "chan_iax2.c:4071 __auto_congest: Auto-congesting call due to slow response" failure message. As it happens, the one I can do the connecting connect with is the one that uses the 4569 port. I would expect that I can connect in either direction. What can cause this one-way problem? Ken

2 1

update - 404 msg again
by Ken 19 Dec '10

19 Dec '10

trying to do an update today and this does not work wget http://x.allstarlink.org/svn-trunk.tar.gz -O- | tar xzv is it broken? Ken

2 1

Re: [App_rpt-users] Weather Script
by k8khw＠att.net 19 Dec '10

19 Dec '10

We have this WX script http://webpages.charter.net/w0anm/irlp/WxScripts.html Running on our Asterisk box but I only hear the Audio from the wx audio file when I have incomming audio from another Node. Like I command the script to play the wx report for my area and I only hear the audio from the wx report when another station is talking, When they unkey the wx audio drops When they start talking again the audio mixes with there audio ect. Any ideas Randy

3 3

Custon connect/disconnect messages for echolink
by Carl Davies 19 Dec '10

19 Dec '10

Thanks to everyone who quickly responded, I now have the problem solved, if eannmode =1 is set to any other value then it will not look for the sound files. Again Thank you all, Best regards Carl M1ELR

1 0

pseudo-random macros
by Ken 19 Dec '10

19 Dec '10

I wonder if anyone else has seem macros not do as programmed? Last week my macro that plays 3 audio files numbered 3,4,5 said that it played 3, then 5, then 4 (according to the info on the CLI) Today my macro that plays audio file 1, followed by in ID (*80 command), followed by file 2, actually played to the two files end-to-end without executing the *80 command (thereby timing out the attached nodes). The purpose of the *80 is to "drop the PTT" momentarily, to reset time out timers of attached nodes and ID at the same time. When the macro actually executes the command, this works. (Version 0.267) Related question: is there some other way to reset the timeout timers of attached nodes during the execution of a macro? Ken 27021 27061

1 0

Custon connect/disconnect messages for echolink
by Carl Davies 19 Dec '10

19 Dec '10

Hi all, I have been trying to get custom connect / disconnect messages to work, I have no trouble getting them to function with node numbers from allstar but can't get echolink numbers to work, I have tried just the node number, the node number with a "3" in front and also the node name in both upper and lower case. Any ideas? or is it not supported on echolink connections. Regards and seasons greetings. Carl M1ELR

1 0

Two Nodes
by Bob Bunter 19 Dec '10

19 Dec '10

What's the secret as to getting Two Different Nodes on the same Box to connect and talk to each other?

3 2