December 2011 - App_rpt-users - lists.keekles.org

Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client
by pete M 26 Dec '11

26 Dec '11

got 8 of the t5630 to play with.. plus a t5730 and a hp t1100 tablet.. all free.. So I will work on all this for fun,hoping to do crazy thing with such cute hardware ;-) From: Randy Hammock Sent: Sunday, December 25, 2011 5:42 PM To: pete M Subject: Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client I tried doing the same on one of the thin clients. A friend gave it to me as she was no longer using it for MagicJack. It had the fast processor, 512MB flash drive and 512MB RAM. has no trouble installing LL but would not boot. Did not really expect it to. I gave the computer to some one else to use with a Magic Jack after reinstalling WinXPe (Windows XP embedded). Don't have time to really mess with it. On Sun, Dec 25, 2011 at 9:58 AM, pete M <petem001(a)hotmail.com> wrote: Cannot be more sure then that, its the only ide connector and the flash drive can’t be put in slave mode.. From: Jim Duuuude Sent: Sunday, December 25, 2011 10:50 AM To: petem001(a)hotmail.com ; app_rpt mailing list Subject: RE: [App_rpt-users] Limey Linux on a HP T5630 Thin Client well, for whatever its worth, are you at least sure that you have the flash drive plugged into the IDE0 slot? ------------------------------------------------------------------------------ From: petem001(a)hotmail.com To: app_rpt-users(a)ohnosec.org Date: Sun, 25 Dec 2011 10:49:50 -0500 Subject: Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client Thnaks Jim, I do have a VIA MB, looks like it wont work.. too bad... Now If those 4 gig flash drive would arrived it would be fun.. ordered them on the 2nd of december.. still nothing ... Grrinnn!! From: Jim Duuuude Sent: Sunday, December 25, 2011 10:46 AM To: petem001(a)hotmail.com ; app_rpt mailing list Subject: RE: [App_rpt-users] Limey Linux on a HP T5630 Thin Client Limey only supports VERY specific motherboards. The "via" version is ONLY for a couple of VIA motherboards. JIM ------------------------------------------------------------------------------ From: petem001(a)hotmail.com To: app_rpt-users(a)ohnosec.org Date: Sun, 25 Dec 2011 10:43:36 -0500 Subject: Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client Ok, so its not something about the uri. what could it be? From: Jim Duuuude Sent: Sunday, December 25, 2011 10:27 AM To: petem001(a)hotmail.com ; app_rpt mailing list Subject: RE: [App_rpt-users] Limey Linux on a HP T5630 Thin Client it has nothing do with the URI at all. Besides, DONT USE ONBOARD AUDIO. Its quality is NOT ACCEPTIBLE. JIM WB6NIL ------------------------------------------------------------------------------ From: petem001(a)hotmail.com To: app_rpt-users(a)ohnosec.org Date: Sun, 25 Dec 2011 00:49:48 -0500 Subject: Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client Finally got Limey on the machine.. (Did it with ubuntu live cd , took sometime to figure out where the damn drive was hidden but I got it..) Limey wont boot properly, it stop at : isapnp:No plug & Play device found So from what I understand, since it wont see a URI connected to the machine, it wont continu booting. I dont want to use a URI i want to use the onboard audio and the onboard serial port for ptt/cor.. too bad, will have to find something else.. Unless someone ahve a solution ;-)))) that would be a very nice xmass present ;-)) Pierre VE2PF From: Tim Sawyer Sent: Saturday, December 24, 2011 11:21 PM To: pete M Cc: APP RPT Subject: Re: [App_rpt-users] Limey Linux on a HP T5630 Thin Client I built a ribbon cable with two 44 pin connectors on it for just that task. That way I can use my Mac. On CentOS I'm not sure where your removable media will be... maybe in /dev/disk/something? -- Tim :wq On Dec 24, 2011, at 11:27 AM, pete M wrote: ok , I have some problem here.. Since my t5630 flash drive have a connector that is exactly like the connector that usely is on the end of a ide 44 pin cable I cant connect it to my usb adaptor and dd the limey image to the flash drive. so I have to do it from the machine itself. so to do so I downloaded ubuntu live cd to boot from a dvd reader and I have limey tar file on a usb stick. I try to find where the hell in monted the damn ide flash disk and just cant.. I do have an Icone on the desktop but its a symlink and cant find where its pointing.. So I am right now downloading the centos 5.5 live dvd, hoping it will be more clear where the damn thing is.. I tried ide0 no go, ide1 not better.. Anyone can help?? And By the way Have a merry Xmass to everyone on the list Pierre Martel VE2PF From: Jim Duuuude Sent: Wednesday, December 21, 2011 3:55 PM To: petem001(a)hotmail.com ; app_rpt mailing list Subject: RE: [App_rpt-users] Limey Linux on a HP T5630 Thin Client The probably easiest way to get an answer to your question is to determine it emperically. Download the following image: http://stats.allstarlink.org/limeylinux/downloads/cfimg-i586-via-1.1.5.tar.… and IMAGE copy it (after un-tarring) to the flash drive (using dd or equivalent). If it boots, and "talks" to the ethernet, etc, then it works. Otherwise, it doesnt. JIM WB6NIL ---------------------------------------------------------------------------- From: petem001(a)hotmail.com To: app_rpt-users(a)ohnosec.org Date: Wed, 21 Dec 2011 15:46:27 -0500 Subject: [App_rpt-users] Limey Linux on a HP T5630 Thin Client I Have a few T5630 thin client that was donated to me (spec: 1ghz CPU , 1 gig of ram, 1 Gig flash drive) they have a VIA chipset that have Video , network, and audio device I am wondering if I could use that thin client with Limey to do a Allstar node AND an echolink node.. I would connect that to port 3 of my rc210 controler that I have for my 2 M and 70 cm repeater’s. If possible, how to i build the thing?? I know a few thing about Linux but I am no way a guru.. I do prefer a windows machine, but I know that Linux in more stable.. So is it possible or am I dreaming? forgot to tell you that there is a serial and printerl port to the machine you can see the spec there: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01571963/c0… Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users(a)ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- Randy Hammock Phone: 818-925-4576

8 12

AutoPatch
by Matt Roberts 26 Dec '11

26 Dec '11

I activated the autopatch early this morning. Because the web portal is not totally speech friendly, I had to pull some tricks to get the information I needed for manual configuration. The file I have is different than the one that is shown. If the information wasn't in my configuration files, I cut and pasted the correct lines into my configuration. Since I had to do this, maybe I might have missed something. When I bring up the patch, I get a dial tone, and I dial the number. The repeater tells me the call is connecting, then I get a call terminated message. The manual configuration information says nothing about modifying rpt.conf, but if you read the documentation it tells you to modify this file. Do I need to do this? If so, what do I need to put in there? I tried changing "context=radio" above the callerid setting to "context=pstn-out and that resulted in me getting a dial tone, and when I tried to dial I'd get a fast busy signal. Does anyone have any ideas on what I should do to fix this? Matt Roberts n9gmr(a)me.com Call Sign N9GMR IRLP 4515 EchoLink 640860 Allstar 28142

1 0

CTCSS Drop Out Time
by Jim W7RY 26 Dec '11

26 Dec '11

Anyone know if there is an adjustment of the time the transmitter stays keyed, and the PL tone drops out and where that setting is? With my rigs, I still here the squelch crash after the repeater drops out. I would like to cut the PL off a little sooner or delay the transmitter a little longer. BTW, I'm all up and running with the repeater function and the node! Thanks to all that helped me get past the learning curve! Thanks! Merry Christmas 73 Jim W7RY

7 18

Courtesy Tones
by Jim W7RY 26 Dec '11

26 Dec '11

I'm also looking for the best way to disable courtesy tones. I've tried to ; them out but that doesn't do anything. Do I just set the level to 0? 73 and thanks! Jim W7RY

2 1

chan_usbradio.c dependencies?
by Michael J. Wolthuis 26 Dec '11

26 Dec '11

I am trying to build the SVN on CentOS. I can not use an ACiD load on this node because it has other functionality I cannot remove. Zaptel is building fine, but Asterisk throws an error on chan_usbradio. I think I am missing some dependencies, but can not figure out what. Here is the error I get when building asterisk: *********************************************************** The existing menuselect.makeopts file did not specify that 'chan_usbradio' should not be included. However, either some dependencies for this module were not found or a conflict exists. Either run 'make menuselect' or remove the existing menuselect.makeopts file to resolve this issue. *********************************************************** make[1]: *** [menuselect.makeopts] Error 255 make[1]: Leaving directory `/usr/src/astsrc/asterisk' make: *** [llastate/asterisk-installed] Error 2 I do not need chan_usbradio on this box, but would prefer to figure out what dependencies I am missing and build it if possible for future use. Mike kb8zgl

4 3

Happy Holidays
by Jim Duuuude 25 Dec '11

25 Dec '11

I just wanted to say happy holidays, merry Chirsmaqwanzakkah, etc... to everyone. JIM WB6NIL

6 5

Re: [App_rpt-users] wishes
by K&R Yoksh 25 Dec '11

25 Dec '11

> a very Merry Christmas and sincere best wishes for a happy and healthy > 2012. > > and for duuuude...for all you've done, and continue to do.. my personal > thanks and appreciation! I couldn't agree more! Happy New Year to all! 73 Kyle K0KN Olathe, KS ----- Original Message ----- > Date: Sun, 25 Dec 2011 12:38:23 -0500 > From: "Bryan D. Boyle" > Subject: [App_rpt-users] wishes > Message-ID: <D53CF8D4-9F8C-4FA9-B18A-5E035CBF0A08(a)bdboyle.com> > Content-Type: text/plain; charset=us-ascii > > a very Merry Christmas and sincere best wishes for a happy and healthy > 2012. > > and for duuuude...for all you've done, and continue to do.. my personal > thanks and appreciation! > > -- > Bryan

1 0

Re: [App_rpt-users] [pcrepeatercontroller] Re: Analog Repeater Weatherinformation
by Shaun Rudling 25 Dec '11

25 Dec '11

I think we are missing the point. We have 2 kinds of people here............. 1- Those that write and code software (with feedback from users to debug, inspire and suggest)------------ (A huge undertaking) 2- Those that implement the software and run around installing and maintaining the hardware. ------------ (also a huge undertaking) respect all, brother. So, this hardy guy, is asking the softy guys to add a feature - automatic WX announcements. There is no ways the majority of us are going to suddenly learn how to write scripts, software etc. So in the spirit of Xmas, we are asking for a gift. Hi! But hey, there are not many volunteers writing software, so this is going to remain a suggestion until someone takes on this idea. But I do want to add, that I think it is a very worthwhile feature and would be a huge selling point for D-Star, AllStar to have this. I mean, all hams talk about the weather, don't they? Besides, it is good for warning about impending inclement weather and even the public could monitor the repeaters to make use of a "value-added service" . Good for promoting Amateur Radio. Let's do what the honeybees do when their forage bees numbers are dropping, feed some bees a bit of royal jelly and turn them into forage bees. So let's feed up any potential software developers to build up their numbers. May I be the first to wish everyone a festive season, travel safely and don't eat too much cholesterol. Shaun zr5s On 21/12/11 11:32, Kristoff Bonne wrote: > > Hi Marco, > > > On 20-12-11 23:35, Marco Dittmann wrote: > >> i have run the Analog Repeater under Microsoft Windows XP. >> any idea for this program? >> when the analog repeater that has programed, that was wounderfully, >> > As explained before: > - this is already implemented on the echolink boxes. Why not use that? > - That's not the job of a repeater. That's an add-on. This is > something that other people can develop so that the developer of the > repeater can concentrate on his project. > > >> a lot of people were happy for this functunally... this was a future, >> what no repeater have... that make the analog repeater interessted... >> > Great. Then start coding and developing. :-) > > > 73 > Kristoff - ON1ARF > __._,_.___ > Reply to sender > <mailto:kristoff@skypro.be?subject=Re%3A%20%5Bpcrepeatercontroller%5D%20Re%3A%20Analog%20Repeater%20Weatherinformation> > | Reply to group > <mailto:pcrepeatercontroller@yahoogroups.com?subject=Re%3A%20%5Bpcrepeatercontroller%5D%20Re%3A%20Analog%20Repeater%20Weatherinformation> > | Reply via web post > <http://groups.yahoo.com/group/pcrepeatercontroller/post;_ylc=X3oDMTJxczlib3…> > | Start a New Topic > <http://groups.yahoo.com/group/pcrepeatercontroller/post;_ylc=X3oDMTJmNGJua3…> > > Messages in this topic > <http://groups.yahoo.com/group/pcrepeatercontroller/message/3921;_ylc=X3oDMT…> > (12) > Recent Activity: > > * New Members > <http://groups.yahoo.com/group/pcrepeatercontroller/members;_ylc=X3oDMTJnbWF…> > 13 > * New Photos > <http://groups.yahoo.com/group/pcrepeatercontroller/spnew;_ylc=X3oDMTJnbzVoN…> > 5 > * New Files > <http://groups.yahoo.com/group/pcrepeatercontroller/files;_ylc=X3oDMTJoYWV1Y…> > 7 > > Visit Your Group > <http://groups.yahoo.com/group/pcrepeatercontroller;_ylc=X3oDMTJmbHU5ZzhiBF9…> > > MARKETPLACE > > Stay on top of your group activity without leaving the page you're on > - Get the Yahoo! Toolbar now. > <http://global.ard.yahoo.com/SIG=15optvt23/M=493064.14543979.14562481.132984…> > > Yahoo! Groups > <http://groups.yahoo.com/;_ylc=X3oDMTJlN2M1cDl0BF9TAzk3NDc2NTkwBGdycElkAzI3N…> > > Switch to: Text-Only > <mailto:pcrepeatercontroller-traditional@yahoogroups.com?subject=Change%20Delivery%20Format:%20Traditional>, > Daily Digest > <mailto:pcrepeatercontroller-digest@yahoogroups.com?subject=Email%20Delivery:%20Digest> > . Unsubscribe > <mailto:pcrepeatercontroller-unsubscribe@yahoogroups.com?subject=Unsubscribe> > . Terms of Use <http://docs.yahoo.com/info/terms/> > . > > __,_._,___ > > No virus found in this message. > Checked by AVG - www.avg.com <http://www.avg.com> > Version: 2012.0.1890 / Virus Database: 2109/4693 - Release Date: 12/20/11 >

7 15

Merry Christmas!!
by Ron Simpson 25 Dec '11

25 Dec '11

I just wanted to say Merry Christmas to all if you my family in ham radio! 73, Ron, Maria, Gabby and Molly the field day dog! Sent from Yahoo! Mail on Android

1 0

wishes
by Bryan D. Boyle 25 Dec '11

25 Dec '11

a very Merry Christmas and sincere best wishes for a happy and healthy 2012. and for duuuude...for all you've done, and continue to do.. my personal thanks and appreciation! -- Bryan Sent from my iPhone please forgive misspellings...

1 0