July 2011 - App_rpt-users - lists.keekles.org

My first node attempt today
by Lu Vencl 22 Jul '11

22 Jul '11

Folks, Got the first one up, but I can't seem to get any command to work (unless I use CLI). Is there a script or method where I can get visual screen stats that shows CTCCS, DTMF decode etc? Similar to IRLP's read input? Thanks Lu KA4EPS

5 7

Re: [App_rpt-users] Moving URI between USB ports.
by Michael Carey 17 Jul '11

17 Jul '11

Hi Lu (and other), I've been trying different things (but not a complete re-install yet). One thing I have noticed is that when I have the URI plugged into the add-on PCI USB card the green LED flashes slower than when it is plugged directly into the motherboards USB sockets. I have the URI USB address correctly entered into the usbradio_tune_usb27871.conf file. Receive audio is fine, COS is fine, PTT is fine... just no transmit audio. And strangely last night, I keyed up my box to hear the telemetry tail and when I keyed *81, I got the time announced to me... and then it stopped again. I think for now I will revert back to the motherboard USB sockets and put up with the occasional motorboating audio. I'm just not familiar enough with Asterisk to start trying to work out what is going on with the "no transmit audio" issue. Hopefully someone else will work out what is going on. Thanks to all for your input into my problem. Michael. VK5ZEA On 17/07/2011 23:53, Lu Vencl wrote: > Wow, > I thought this was déjà vu for a moment because I actually thought I > wrote > the email that Michael wrote as I went through the exact thing last > night. I > installed an Belkin Hi-Speen USB 2.0 Dual-Port PCI card in my Asus box in > the hopes that this would solve my motorboating problem because I just > have > no other idea what could be causing this motorboating issue on all of > these > boxes (same ASUS motherboard) and have exhausted all other options as > far as > I know. > So I also had no audio as described my Michael, so since I really had > nothing to lose, I just reinstalled the entire package and that got the > audio working and when it did work, the motorboating issue seemed to be > completely gone! > The only problem that I had was that after a period of time, the audio > and > telemetry would just stop working again. If I restarted asterisk, it > would > return most of the time.. Worse case, I would reboot the box and it would > also return but to only disappear minutes later. > So I finally gave up and just found another box that did not use the same > ASUS motherboard to get my next node built.. Since I do have 8 of these > boxes, I would like to find a solution though as I really would hate > to toss > them out and I have 8 nodes to deploy here in South Florida. > If anyone knows of a USB card that does work, let me know and I will try > it.. I did read that some of these cards will only do USB 1.1 under > Centos > 5.5 and above.. Not sure if that could be the issue? Are we supposed > to be > USB 2.0 with the URI? > I am going to look at what Paul suggested one more time with this USB > card > just in case, but since it does work for a short time, I figured that it > must be configured correctly, no? > I would appreciate any comments. > Thanks and 73 > Lu > KA4EPS .. > -----Original Message----- > From: app_rpt-users-bounces(a)ohnosec.org > [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Paul J. Agamata > Sent: Sunday, July 17, 2011 7:57 AM > To: jrorke(a)cogeco.ca; APP_RPT_Users > Subject: Re: [App_rpt-users] Moving URI between USB ports. > > > do a 'dmesg | grep usb' and you'll ge this: > > usbcore: registered new driver usbfs > usbcore: registered new driver hub > usbcore: registered new driver hiddev > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > usb usb1: configuration #1 chosen from 1 choice > usb usb2: configuration #1 chosen from 1 choice > usb usb3: configuration #1 chosen from 1 choice > usb usb4: configuration #1 chosen from 1 choice > usb usb5: configuration #1 chosen from 1 choice > usb 3-1: new full speed USB device using uhci_hcd and address 2 > usb 3-1: configuration #1 chosen from 1 choice > input: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound > Device] on usb-0000:00:1d.1-1 > usbcore: registered new driver snd-usb-audio > > Notice the usb 3-1 before the C-Media Electronic Inc. device.... > That's the > address of your URI > > In your usbradio_tune_usb0.conf file make sure you match the new devices > port address to this listed below: > > [usb0] > ; name=usb0 > ; devicenum=0 > devstr=3-1<============== Make sure it has the port > address of the new port you plugged it in to > rxmixerset=438 > txmixaset=407 > txmixbset=0 > rxvoiceadj=1.263154 > rxctcssadj=2.154079 > txctcssadj=199 > rxsquelchadj=900 > > restart asterisk.... > > > If you don't get the device address right, all your tuning parameters > will > be thrown off as well. > > _______________________________ > Paul Agamata > Sysman(a)Xceptions.COM > ________________________________________ > From: app_rpt-users-bounces(a)ohnosec.org > [app_rpt-users-bounces(a)ohnosec.org] > On Behalf Of REDBUTTON_CTRL [jrorke(a)cogeco.ca] > Sent: Sunday, July 17, 2011 1:21 AM > To: APP_RPT_Users > Subject: Re: [App_rpt-users] Moving URI between USB ports. > > Hi Michael, I tried a PCI 4 port USB card and didn't have much luck with > it. Not to say they don't work, but I never got it to work properly. > > I did make sure that it was USB 2.0. > > You might want to try to make a small adjustment to your radio tune file > like bumping the squelch setting by 1 notch, then re-saving. That will > update your radio tune file with the current USB port. > > As example, if your squelch was set to 850 do a "radio tune rxsquelch > 851" > Then save with "radio tune save". > > Perhaps restart Asterisk and see if that works. > > I have always relied on PCs that are P4 3G boxes that have 4 - 6 USB 2.0 > ports on board and have had no trouble there. > > What is the speed of your box? Does it meet the min specs? USB ports > must be 2.0 or you will have problems. > > Regards, > > Jon VA3RQ > > On 7/17/2011 3:23 AM, Michael Carey wrote: >> Hi Everybody, >> >> In an attempt to fix a random "motorboating" audio issue on transmit I >> have with my new AllStarLink node, I fitted a PCI USB2.0 board (NEC >> chipset) to the computer. >> CentOS found the new card fine. I shifted my URI to one of the new USB >> ports and everything seems to be working... EXCEPT I am not getting >> any transmitted audio. >> Receive audio is fine, the radio will key up OK... but I get no >> telemetry tones nor any incoming audio. >> >> What needs to be done when you move a URI to another USB port? Why >> would receive audio be fine and transmitted audio not? >> >> Please be gentle, I am still a little green with this new stuff. >> >> Michael. >> VK5ZEA >> _______________________________________________ >> App_rpt-users mailing list >> App_rpt-users(a)ohnosec.org >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >> > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >

1 0

Moving URI between USB ports.
by Michael Carey 17 Jul '11

17 Jul '11

Hi Everybody, In an attempt to fix a random "motorboating" audio issue on transmit I have with my new AllStarLink node, I fitted a PCI USB2.0 board (NEC chipset) to the computer. CentOS found the new card fine. I shifted my URI to one of the new USB ports and everything seems to be working... EXCEPT I am not getting any transmitted audio. Receive audio is fine, the radio will key up OK... but I get no telemetry tones nor any incoming audio. What needs to be done when you move a URI to another USB port? Why would receive audio be fine and transmitted audio not? Please be gentle, I am still a little green with this new stuff. Michael. VK5ZEA

4 3

Re: [App_rpt-users] App_rpt-users Digest, Vol 29, Issue 19
by Andrew Gilbett 16 Jul '11

16 Jul '11

Sorry didnt reply to the list. Also in the asterisk cli of you precede any command with the word "help" you will find out how the commands work. On 17/07/2011 9:01 AM, "Andrew Gilbett" <andrew.gilbett(a)gmail.com> wrote: > Either edit beagle_tune1.conf (the name of the file is like that but may be > different) in /etc/asterisk or use > > beagle tune rx abc > > where abc is between 0 & 999 > > Regards Andrew > vk2xag > On 17/07/2011 2:25 AM, "Ken Leisten" <k995996(a)gmail.com> wrote: >> Yes, thanks its working and on line. Next question is how do I adjust > tx/rx >> audio for each port on the LOX. "Radio-tune-menu" doesnt seem to exist. >> >> Ken >> >> On Sat, Jul 16, 2011 at 9:00 AM, <app_rpt-users-request(a)ohnosec.org> > wrote: >> >>> Send App_rpt-users mailing list submissions to >>> app_rpt-users(a)ohnosec.org >>> >>> To subscribe or unsubscribe via the World Wide Web, visit >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> or, via email, send a message with subject or body 'help' to >>> app_rpt-users-request(a)ohnosec.org >>> >>> You can reach the person managing the list at >>> app_rpt-users-owner(a)ohnosec.org >>> >>> When replying, please edit your Subject line so it is more specific >>> than "Re: Contents of App_rpt-users digest..." >>> >>> Today's Topics: >>> >>> 1. CURL error (George Csahanin) >>> 2. Exp reflector (Neal Garbenis) >>> 3. Re: Exp reflector (Bryan Boyle) >>> 4. Re: Echolink Ka-CHunk nodes? (Phil N6TCT) >>> 5. Re: Exp reflector (Neal Garbenis) >>> 6. FWIW... (Bryan D. Boyle) >>> 7. Re: Pico node configuration (Dale Weber) >>> >>> >>> ---------- Forwarded message ---------- >>> From: "George Csahanin" <george(a)dyb.com> >>> To: "app_rpt mailing list" <app_rpt-users(a)ohnosec.org> >>> Date: Fri, 15 Jul 2011 12:13:45 -0500 >>> Subject: [App_rpt-users] CURL error >>> ** >>> When trying to use the web transciever I get this: >>> >>> ERROR[26440]: pbx.c:1550 ast_func_read: Function CURL not registered >>> >>> I do have curl...: >>> >>> [root@radio ~]# curl --help >>> Usage: curl [options...] <url> >>> Options: (H) means HTTP/HTTPS only, (F) means FTP only >>> -a/--append Append to target file when uploading (F) >>> -A/--user-agent <string> User-Agent to send to server (H) >>> --anyauth Pick "any" authentication method (H) >>> -b/--cookie <name=string/file> Cookie string or file to read cookies from >>> (H) >>> --basic Use HTTP Basic Authentication (H) >>> -B/--use-ascii Use ASCII/text transfer >>> -c/--cookie-jar <file> Write cook >>> >>> What is "*Function CURL not registered"* >>> ** >>> ?? >>> >>> GeorgeC >>> W2DB >>> ** >>> >>> >>> ---------- Forwarded message ---------- >>> From: Neal Garbenis <njgarbenis(a)gmail.com> >>> To: app_rpt-users(a)ohnosec.org >>> Date: Fri, 15 Jul 2011 17:44:26 -0400 >>> Subject: [App_rpt-users] Exp reflector >>> I am trying to make a experimental asterisk and irlp reflector. I went >>> through the svn and found chan- irlp and a older version of app-rpt. I > had >>> the system working for a day or so and then it stopped. >>> >>> My question is has anyone done this before. If so how did you do it? My >>> irlp exp is 0054. >>> >>> Neal >>> >>> >>> ---------- Forwarded message ---------- >>> From: Bryan Boyle <bdboyle(a)bdboyle.com> >>> To: Neal Garbenis <njgarbenis(a)gmail.com> >>> Date: Fri, 15 Jul 2011 18:07:24 -0400 >>> Subject: Re: [App_rpt-users] Exp reflector >>> support for irlp was taken out by the authors of asterisk at Cameron's >>> demand...did not want asterisk to cross connect to 'his' network, from > what >>> I understand. those closer please feel free to fill in or correct. >>> >>> -- >>> Bryan >>> Sent from my iPhone >>> please forgive misspellings... >>> >>> >>> >>> On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis(a)gmail.com> wrote: >>> >>> > I am trying to make a experimental asterisk and irlp reflector. I went >>> through the svn and found chan- irlp and a older version of app-rpt. I > had >>> the system working for a day or so and then it stopped. >>> > >>> > My question is has anyone done this before. If so how did you do it? My >>> irlp exp is 0054. >>> > >>> > Neal >>> > _______________________________________________ >>> > App_rpt-users mailing list >>> > App_rpt-users(a)ohnosec.org >>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Phil N6TCT <phil.n6tct(a)gmail.com> >>> To: Ken Page <vk4akp(a)yahoo.com.au> >>> Date: Fri, 15 Jul 2011 16:25:42 -0700 >>> Subject: Re: [App_rpt-users] Echolink Ka-CHunk nodes? >>> Hi Ken. >>> >>> I have not seen this exact problem, but I have seen a problem where >>> echolink users connect to our allstar/echolink node but no audio is >>> passed. They can key up the node but it just transmits a carrier with >>> no audio. For some, possibly most, echolink users it works just fine. >>> I have chalked this up to either bad audio configuration on the >>> echolink user's end or bad port forwarding configuration, but have not >>> done any real investigation. >>> >>> I have not seen the continuous kerchunking that you describe. (And I >>> hope that I don't, that sounds super annoying!) Sorry ... >>> >>> Phil, N6TCT >>> >>> On Thu, Jul 14, 2011 at 8:21 PM, Ken Page <vk4akp(a)yahoo.com.au> wrote: >>> > Hi, >>> > >>> > I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just >>> log >>> > in and then I'm left with a connection that just key's up and down >>> > constantly every few seconds with no audio all day until I notice and >>> hang >>> > it up.. >>> > >>> > Do I need to update some of the All_Star software or something to get >>> around >>> > this? >>> > >>> > It's something that has only started in the last month or so. >>> > >>> > 73 de Ken - vk4akp(a)gmail.com >>> > All_Star:2134 - vk4rkp - 146.725Mhz -Neg. >>> > Echolink: 7878 >>> > .-.-. >>> > _______________________________________________ >>> > App_rpt-users mailing list >>> > App_rpt-users(a)ohnosec.org >>> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> > >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Neal Garbenis <njgarbenis(a)gmail.com> >>> To: Bryan Boyle <bdboyle(a)bdboyle.com> >>> Date: Fri, 15 Jul 2011 19:30:29 -0400 >>> Subject: Re: [App_rpt-users] Exp reflector >>> Yes you are correct but it is ok to have exp reflectors to tie both >>> networks together. This is what I am trying to do >>> >>> Sent from my iPhone >>> >>> On Jul 15, 2011, at 6:07 PM, Bryan Boyle <bdboyle(a)bdboyle.com> wrote: >>> >>> > support for irlp was taken out by the authors of asterisk at Cameron's >>> demand...did not want asterisk to cross connect to 'his' network, from > what >>> I understand. those closer please feel free to fill in or correct. >>> > >>> > -- >>> > Bryan >>> > Sent from my iPhone >>> > please forgive misspellings... >>> > >>> > >>> > >>> > On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis(a)gmail.com> > wrote: >>> > >>> >> I am trying to make a experimental asterisk and irlp reflector. I went >>> through the svn and found chan- irlp and a older version of app-rpt. I > had >>> the system working for a day or so and then it stopped. >>> >> >>> >> My question is has anyone done this before. If so how did you do it? > My >>> irlp exp is 0054. >>> >> >>> >> Neal >>> >> _______________________________________________ >>> >> App_rpt-users mailing list >>> >> App_rpt-users(a)ohnosec.org >>> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: "Bryan D. Boyle" <bdboyle(a)bdboyle.com> >>> To: app_rpt mailing list <app_rpt-users(a)ohnosec.org> >>> Date: Fri, 15 Jul 2011 22:34:06 -0400 >>> Subject: [App_rpt-users] FWIW... >>> Some photos of the installation of active nodes 27294/27295/27774 >>> (others are in abeyance, running under pseudo/usbxxxxx) >>> >>> Hope no one minds posting the URL. It's a work in progress... >>> >>> http://www.wb0yle.com/rptr.htm >>> >>> 73 BB WB0YLE >>> >>> >>> >>> ---------- Forwarded message ---------- >>> From: Dale Weber <n7pkt(a)picklejar.org> >>> To: app_rpt-users(a)ohnosec.org >>> Date: Fri, 15 Jul 2011 20:02:19 -0700 >>> Subject: Re: [App_rpt-users] Pico node configuration >>> On Wednesday, July 13, 2011 07:10:22 PM Ken Leisten wrote: >>> > Hi all, >>> > >>> > Got Pickle Linux copied to a flash card and running on my > beagleboard/LOX >>> > node. It walked me through changing some network settings for IP, >>> gateway, >>> > subnet etc., but it never asked me for a node number or tried to > download >>> > configuration from the allstar portal. I tried forcing a config through >>> the >>> > portal but this doesn't seem to work either. What am I missing? >>> >>> Got to node configuration, and select the server and node you want >>> to run on >>> Beagle/LOX. Then select your radio interface type as beagle > (BeagleBoard-xM >>> with LOX board). Then you will see a selection for port. Port 1 is > closest >>> to >>> the Ethernet connector on Beagle. Finally, download the server >>> configuration >>> with your node to the Beagle with/LOX. >>> >>> That should do it! >>> >>> 8-Dale >>> >>> >>> _______________________________________________ >>> App_rpt-users mailing list >>> App_rpt-users(a)ohnosec.org >>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users >>> >>>

1 0

FWIW...
by Bryan D. Boyle 16 Jul '11

16 Jul '11

Some photos of the installation of active nodes 27294/27295/27774 (others are in abeyance, running under pseudo/usbxxxxx) Hope no one minds posting the URL. It's a work in progress... http://www.wb0yle.com/rptr.htm 73 BB WB0YLE

2 2

Re: [App_rpt-users] App_rpt-users Digest, Vol 29, Issue 19
by Ken Leisten 16 Jul '11

16 Jul '11

Yes, thanks its working and on line. Next question is how do I adjust tx/rx audio for each port on the LOX. "Radio-tune-menu" doesnt seem to exist. Ken On Sat, Jul 16, 2011 at 9:00 AM, <app_rpt-users-request(a)ohnosec.org> wrote: > Send App_rpt-users mailing list submissions to > app_rpt-users(a)ohnosec.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > or, via email, send a message with subject or body 'help' to > app_rpt-users-request(a)ohnosec.org > > You can reach the person managing the list at > app_rpt-users-owner(a)ohnosec.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of App_rpt-users digest..." > > Today's Topics: > > 1. CURL error (George Csahanin) > 2. Exp reflector (Neal Garbenis) > 3. Re: Exp reflector (Bryan Boyle) > 4. Re: Echolink Ka-CHunk nodes? (Phil N6TCT) > 5. Re: Exp reflector (Neal Garbenis) > 6. FWIW... (Bryan D. Boyle) > 7. Re: Pico node configuration (Dale Weber) > > > ---------- Forwarded message ---------- > From: "George Csahanin" <george(a)dyb.com> > To: "app_rpt mailing list" <app_rpt-users(a)ohnosec.org> > Date: Fri, 15 Jul 2011 12:13:45 -0500 > Subject: [App_rpt-users] CURL error > ** > When trying to use the web transciever I get this: > > ERROR[26440]: pbx.c:1550 ast_func_read: Function CURL not registered > > I do have curl...: > > [root@radio ~]# curl --help > Usage: curl [options...] <url> > Options: (H) means HTTP/HTTPS only, (F) means FTP only > -a/--append Append to target file when uploading (F) > -A/--user-agent <string> User-Agent to send to server (H) > --anyauth Pick "any" authentication method (H) > -b/--cookie <name=string/file> Cookie string or file to read cookies from > (H) > --basic Use HTTP Basic Authentication (H) > -B/--use-ascii Use ASCII/text transfer > -c/--cookie-jar <file> Write cook > > What is "*Function CURL not registered"* > ** > ?? > > GeorgeC > W2DB > ** > > > ---------- Forwarded message ---------- > From: Neal Garbenis <njgarbenis(a)gmail.com> > To: app_rpt-users(a)ohnosec.org > Date: Fri, 15 Jul 2011 17:44:26 -0400 > Subject: [App_rpt-users] Exp reflector > I am trying to make a experimental asterisk and irlp reflector. I went > through the svn and found chan- irlp and a older version of app-rpt. I had > the system working for a day or so and then it stopped. > > My question is has anyone done this before. If so how did you do it? My > irlp exp is 0054. > > Neal > > > ---------- Forwarded message ---------- > From: Bryan Boyle <bdboyle(a)bdboyle.com> > To: Neal Garbenis <njgarbenis(a)gmail.com> > Date: Fri, 15 Jul 2011 18:07:24 -0400 > Subject: Re: [App_rpt-users] Exp reflector > support for irlp was taken out by the authors of asterisk at Cameron's > demand...did not want asterisk to cross connect to 'his' network, from what > I understand. those closer please feel free to fill in or correct. > > -- > Bryan > Sent from my iPhone > please forgive misspellings... > > > > On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis(a)gmail.com> wrote: > > > I am trying to make a experimental asterisk and irlp reflector. I went > through the svn and found chan- irlp and a older version of app-rpt. I had > the system working for a day or so and then it stopped. > > > > My question is has anyone done this before. If so how did you do it? My > irlp exp is 0054. > > > > Neal > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > ---------- Forwarded message ---------- > From: Phil N6TCT <phil.n6tct(a)gmail.com> > To: Ken Page <vk4akp(a)yahoo.com.au> > Date: Fri, 15 Jul 2011 16:25:42 -0700 > Subject: Re: [App_rpt-users] Echolink Ka-CHunk nodes? > Hi Ken. > > I have not seen this exact problem, but I have seen a problem where > echolink users connect to our allstar/echolink node but no audio is > passed. They can key up the node but it just transmits a carrier with > no audio. For some, possibly most, echolink users it works just fine. > I have chalked this up to either bad audio configuration on the > echolink user's end or bad port forwarding configuration, but have not > done any real investigation. > > I have not seen the continuous kerchunking that you describe. (And I > hope that I don't, that sounds super annoying!) Sorry ... > > Phil, N6TCT > > On Thu, Jul 14, 2011 at 8:21 PM, Ken Page <vk4akp(a)yahoo.com.au> wrote: > > Hi, > > > > I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just > log > > in and then I'm left with a connection that just key's up and down > > constantly every few seconds with no audio all day until I notice and > hang > > it up.. > > > > Do I need to update some of the All_Star software or something to get > around > > this? > > > > It's something that has only started in the last month or so. > > > > 73 de Ken - vk4akp(a)gmail.com > > All_Star:2134 - vk4rkp - 146.725Mhz -Neg. > > Echolink: 7878 > > .-.-. > > _______________________________________________ > > App_rpt-users mailing list > > App_rpt-users(a)ohnosec.org > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > > > ---------- Forwarded message ---------- > From: Neal Garbenis <njgarbenis(a)gmail.com> > To: Bryan Boyle <bdboyle(a)bdboyle.com> > Date: Fri, 15 Jul 2011 19:30:29 -0400 > Subject: Re: [App_rpt-users] Exp reflector > Yes you are correct but it is ok to have exp reflectors to tie both > networks together. This is what I am trying to do > > Sent from my iPhone > > On Jul 15, 2011, at 6:07 PM, Bryan Boyle <bdboyle(a)bdboyle.com> wrote: > > > support for irlp was taken out by the authors of asterisk at Cameron's > demand...did not want asterisk to cross connect to 'his' network, from what > I understand. those closer please feel free to fill in or correct. > > > > -- > > Bryan > > Sent from my iPhone > > please forgive misspellings... > > > > > > > > On Jul 15, 2011, at 5:44 PM, Neal Garbenis <njgarbenis(a)gmail.com> wrote: > > > >> I am trying to make a experimental asterisk and irlp reflector. I went > through the svn and found chan- irlp and a older version of app-rpt. I had > the system working for a day or so and then it stopped. > >> > >> My question is has anyone done this before. If so how did you do it? My > irlp exp is 0054. > >> > >> Neal > >> _______________________________________________ > >> App_rpt-users mailing list > >> App_rpt-users(a)ohnosec.org > >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > > > > ---------- Forwarded message ---------- > From: "Bryan D. Boyle" <bdboyle(a)bdboyle.com> > To: app_rpt mailing list <app_rpt-users(a)ohnosec.org> > Date: Fri, 15 Jul 2011 22:34:06 -0400 > Subject: [App_rpt-users] FWIW... > Some photos of the installation of active nodes 27294/27295/27774 > (others are in abeyance, running under pseudo/usbxxxxx) > > Hope no one minds posting the URL. It's a work in progress... > > http://www.wb0yle.com/rptr.htm > > 73 BB WB0YLE > > > > ---------- Forwarded message ---------- > From: Dale Weber <n7pkt(a)picklejar.org> > To: app_rpt-users(a)ohnosec.org > Date: Fri, 15 Jul 2011 20:02:19 -0700 > Subject: Re: [App_rpt-users] Pico node configuration > On Wednesday, July 13, 2011 07:10:22 PM Ken Leisten wrote: > > Hi all, > > > > Got Pickle Linux copied to a flash card and running on my beagleboard/LOX > > node. It walked me through changing some network settings for IP, > gateway, > > subnet etc., but it never asked me for a node number or tried to download > > configuration from the allstar portal. I tried forcing a config through > the > > portal but this doesn't seem to work either. What am I missing? > > Got to node configuration, and select the server and node you want > to run on > Beagle/LOX. Then select your radio interface type as beagle (BeagleBoard-xM > with LOX board). Then you will see a selection for port. Port 1 is closest > to > the Ethernet connector on Beagle. Finally, download the server > configuration > with your node to the Beagle with/LOX. > > That should do it! > > 8-Dale > > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users(a)ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users > >

1 0

Pico node configuration
by Ken Leisten 16 Jul '11

16 Jul '11

Hi all, Got Pickle Linux copied to a flash card and running on my beagleboard/LOX node. It walked me through changing some network settings for IP, gateway, subnet etc., but it never asked me for a node number or tried to download configuration from the allstar portal. I tried forcing a config through the portal but this doesn't seem to work either. What am I missing? Thanks, Ken

2 1

Exp reflector
by Neal Garbenis 15 Jul '11

15 Jul '11

I am trying to make a experimental asterisk and irlp reflector. I went through the svn and found chan- irlp and a older version of app-rpt. I had the system working for a day or so and then it stopped. My question is has anyone done this before. If so how did you do it? My irlp exp is 0054. Neal

2 2

Echolink Ka-CHunk nodes?
by Ken Page 15 Jul '11

15 Jul '11

Hi, I seem to be getting a huge amount of Echolink Ka-Chunk nodes that just log in and then I'm left with a connection that just key's up and down constantly every few seconds with no audio all day until I notice and hang it up.. Do I need to update some of the All_Star software or something to get around this? It's something that has only started in the last month or so. 73 de Ken - vk4akp(a)gmail.com All_Star:2134 - vk4rkp - 146.725Mhz -Neg. Echolink: 7878 .-.-.

2 1

Chicken Burst tweak
by Lu Vencl 15 Jul '11

15 Jul '11

Looking for the parameter and file (if not in rpt.conf) where I can tweak the length of chicken burst. The current amount is not enough for my VX 5R.. I need another 200 MS to be effective. Thanks.. Lu KA4EPS

7 17